|Length x width x height||- × - × -|
|Hours under power|
|At local norms||---------|
BS 1100 5LP Automatic Bottom Seam Bag Making Machine
- Produces bags with seams at the bottom and block packs (no perforation procedure on this machine).
- By cutting with three hot knives, it produces 5 lines of bags.
- Cold cutting system available
- At 1 cm from the inside of the open end, the bag is placed on a cold needle.
- Cut bags will be installed on the conveyor belt. According to the standard, the conveyor is delivered together with the equipment.
- Has a servo motor and inverter system
- Package size, number of packages can be changed using the screen. From the screen, you can see the number of packets
the number of packages and the speed of the machine.
- There is 1 photocell. Cuts packages with and without stamping.
- Works with high concentration polyethylene (HDPE), low concentration polyethylene (LDPE) and bags
- The machine is equipped with an automatic stopping system: at the end of the bale, if the bale is incorrect
The machine stops at the following location of the print, or when pouches are stacked or squeezed in one place
the screen emits a warning sign.
Spare parts used for equipment:
- Servo motor and drive from German company KOLMORGEN,
- Asynchronous inverters from the German company ABB
- Touch screen from German company KOLMORGEN,
- Pneumatic parts of German company Festo,
- Controller of the German company ABB,
- The contactor and fuses of the French company Schneider Electric,
- Relay from Japanese company OMRON,
- Button mechanisms and contacts from the French company Schneider Electric,
- Photocell from German company SICK,
- Proximity sensors and photocells of German company SICK
- Asynchronous motors of Turkish company GAMAK, manufactured according to European CE standards,
- Reducer of Turkish company YILMAZ REDUKTOR (is made with German certificates TUV),
- Bearings of German company FAG and Turkish company ORS
Main machine features: BS-1100
on the package (mm) 1000
package (mm) 130-3000
on films (mm) 0.007-0.1
Production speed (pcs./min) 200
engine (quantity) 1
Element (pcs.) 1
Air (lt/m) 250
Water capacity(kW) 10
Complete set of equipment
✓ Pneumatic shaft winding 2 pcs.
✓ Banana shaft.
✓ PLC system electric panel.
✓ Servomotor 1 pc
✓ Thermal knife 4 pcs.
✓ Regional control system
✓ Belt Conveyor
✓ Counter number of pcs
✓ The system will fall the reel (pneumatically)
✓ Electric unwinding system
Please note that this description may have been translated automatically. Contact us for further information.