|Bag height||70.0 mm|
|Bag width||200.0 mm|
|Length x width x height||180.0 mm × 90.0 mm × 190.0 mm|
|Worked hours||0 hours|
|Hours under power||0 hours|
|At local norms||---------|
Machines are made of completely stainless steel
-Sachet hand sanitizers
-Medical wet wipes
-Promotional perfume, oil, cream, shampoo... up to (12gr)
-Make up removing wipes or liquid
-Personal hygiene wipes
-Alcohol wet wipes
-Single use wet wipes
- between 12 x12 to 16x16 Empty one side open pouch or envelope ( for sterile/gauze bandage)
Nonwoven width range: 90mm to 250mm
Nonwoven height range: 110mm to 220mm
Package width: 50mm to 80mm
Package height: 60mm to 140mm
capacity / per minute: 90-95 sachet/min
Liquid dosing Between: 1gr nd 10gr (+10gr if extra piston ordered)
Dimensions and weight 85cm X 190 cm X 170 cm
Electricity requirement: 2,5 KW. - 220 V. AC 50 - 60 hz.
Control System : LG PLC controller
Control Panel : LG Touch screen 7 inch
Operation by Photocell-without Photocell
Outer packaging and inner wipe motors are stepper motor
On-screen digitally adjustable package sizes and non-woven size setting
Ease of passage between measures. Special rail system that can be adjusted quickly and easily between the short time periods.
Production of desired wipes from 5x8 to 14x14
Digital tachometer indicating net capacity of the machine per minute
Fully automatic wet wipes packaging machine can be used to pack wipes in desired dimensions. Packages produced for packaging machines (PET ALU PE three layers laminated) are printed first on flexo printing machines. Packaging is conducted automatically by attaching printed rolls to the packaging machine. The machine counts the number of produced wipes and places them into a box. The desired size of the package to be packed is set by the operator in milimetres.
The cloth inside the wet wipes is a material known as non-woven. The non-woven roll / coil attached to the machine is an average length of 4,000 meters. In the fully automatic wet wipe machine, the desired size is written in milimetres on the touch screen. Thanks to the intelligent motors of the wet wipe machine, the operator folds the non-woven fabric to the extent that is written on the screen and cuts it into the package.
The volumetric system pump of the wet wipes machine injects the desired amount of liquid into the wipes packs by pulling it from the reservoir. Wet wipe fluid varies from manufacturer to manufacturer and is usually taken as a base of 10 to 16 liters
-Single use wet tissue production with high speed of 85-90 wet wipes per minute. Offers quick change of the packing film material and non woven tissues by air pressured rolling cylinder mills.
-All the bearings, screws, springs are all made by stainless steel for increasing the life span of the machines.
For gel materials we can add an extra dozing unit.
Please note that this description may have been translated automatically. Contact us for further information.