Specifications

Engine power 3 kW
-------------------
Length x width x height 2500.0 × 1000.0 × 1600.0
Weight 400 kg
Worked hours
Hours under power
State like new
At local norms ---------
Status under power

Description

The notching saws AS 450 are proven machines for structural engineering with aluminium and PVC profiles.
Two independently arranged sawing units allow a wide variety of notches to be cut at the end of the profile.
at the end of the profile bar.
Technical description: The vertical saw blade can be turned up to 45° by a worm gear with hand crank.
can be tilted up to 45° by means of a worm gear with a hand crank. There are adjustable fixed stops at 90° and 45°,
Intermediate mitres according to scale.
The horizontal saw blade can be adjusted both in height and in its distance from the vertical saw blade via column guides.
distance to the vertical saw blade. This also allows contours to be notched.
The sliding table runs in an adjustable ball-bush guide on hardened and ground steel shafts.
It can be adjusted by handwheels both in height and transversely to the saw blades. The
The material stop shoulder can be swivelled on both sides up to acute angles. The adjustment of the
angle is set via an easy-to-read scale on the table, with the 90° position fixed by a stop.
stop.
The material to be processed is securely clamped with a horizontal and a vertical cylinder.
Both saw blades work in counter-rotation so that the material to be cut is not pulled in.
The two saw motors can be switched individually. This makes it possible to use only one saw unit of the notching saw.
of the notching saw. For example, the vertical saw blade can be used to cut extremely sharp mitres.
or the machine can be used for double mitre cuts in two planes (compound cuts).
(jack rafter cuts).
The sawdust and the material cuttings are fed into the machine stand.
The standard equipment of the machine includes saw blade spraying devices for both units.
The AS 450 notching saw has reinforced saw blade shaft bearings for both saw blades. With a lift truck
The machine can be easily transported with a lift truck via a recess in the machine stand.
Technical data for notching saw AS 350
Drive: ........................................................ 2 three-phase brake motors 400 V, 3 kW
Motors can be switched individually with undervoltage release and
overload protection
Speed: ...................................................... 2800 rpm, direct drive
Tool diameter: ............................... vertical unit: 450 mm
horizontal aggregate: 350 mm
Tool holder: .................................... vertical unit: 40 mm ø,
horizontal unit: 40 mm ø,
Working range: .......................................... Cutting height: 153 mm
Notching depth: 110 mm
Notching width 250 mm
Air connection: ............................................... 6 bar
Machine weight: ...................................... approx. 400 kg
Adjustment possibilities: .................................. - sliding carriage adjustable in height and depth via handwheels
- fixed material stop adjustable
- Vertical saw unit can be tilted from 90° to 45
- horizontal saw unit adjustable in height and depth
- Adjustable fixed stops for each axis
Scope of delivery: notching saw AS 450 with integrated machine base, with pneumatic material clamping,
with saw blade spraying devices for each saw blade, without saw blades.
Special accessories: TCT circular saw blade 450 x 4.5 x 40 mm 100 FZ neg.
HM circular saw blade 350 x 3.5 x 40 mm 180 FZ pos.
Rolling block for supporting long profiles
Digital angle display for both axes

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Client type User – small or medium company
Active since 2022
Offers online 3
Last activity June 20, 2024

Description

The notching saws AS 450 are proven machines for structural engineering with aluminium and PVC profiles.
Two independently arranged sawing units allow a wide variety of notches to be cut at the end of the profile.
at the end of the profile bar.
Technical description: The vertical saw blade can be turned up to 45° by a worm gear with hand crank.
can be tilted up to 45° by means of a worm gear with a hand crank. There are adjustable fixed stops at 90° and 45°,
Intermediate mitres according to scale.
The horizontal saw blade can be adjusted both in height and in its distance from the vertical saw blade via column guides.
distance to the vertical saw blade. This also allows contours to be notched.
The sliding table runs in an adjustable ball-bush guide on hardened and ground steel shafts.
It can be adjusted by handwheels both in height and transversely to the saw blades. The
The material stop shoulder can be swivelled on both sides up to acute angles. The adjustment of the
angle is set via an easy-to-read scale on the table, with the 90° position fixed by a stop.
stop.
The material to be processed is securely clamped with a horizontal and a vertical cylinder.
Both saw blades work in counter-rotation so that the material to be cut is not pulled in.
The two saw motors can be switched individually. This makes it possible to use only one saw unit of the notching saw.
of the notching saw. For example, the vertical saw blade can be used to cut extremely sharp mitres.
or the machine can be used for double mitre cuts in two planes (compound cuts).
(jack rafter cuts).
The sawdust and the material cuttings are fed into the machine stand.
The standard equipment of the machine includes saw blade spraying devices for both units.
The AS 450 notching saw has reinforced saw blade shaft bearings for both saw blades. With a lift truck
The machine can be easily transported with a lift truck via a recess in the machine stand.
Technical data for notching saw AS 350
Drive: ........................................................ 2 three-phase brake motors 400 V, 3 kW
Motors can be switched individually with undervoltage release and
overload protection
Speed: ...................................................... 2800 rpm, direct drive
Tool diameter: ............................... vertical unit: 450 mm
horizontal aggregate: 350 mm
Tool holder: .................................... vertical unit: 40 mm ø,
horizontal unit: 40 mm ø,
Working range: .......................................... Cutting height: 153 mm
Notching depth: 110 mm
Notching width 250 mm
Air connection: ............................................... 6 bar
Machine weight: ...................................... approx. 400 kg
Adjustment possibilities: .................................. - sliding carriage adjustable in height and depth via handwheels
- fixed material stop adjustable
- Vertical saw unit can be tilted from 90° to 45
- horizontal saw unit adjustable in height and depth
- Adjustable fixed stops for each axis
Scope of delivery: notching saw AS 450 with integrated machine base, with pneumatic material clamping,
with saw blade spraying devices for each saw blade, without saw blades.
Special accessories: TCT circular saw blade 450 x 4.5 x 40 mm 100 FZ neg.
HM circular saw blade 350 x 3.5 x 40 mm 180 FZ pos.
Rolling block for supporting long profiles
Digital angle display for both axes

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase


Specifications

Engine power 3 kW
-------------------
Length x width x height 2500.0 × 1000.0 × 1600.0
Weight 400 kg
Worked hours
Hours under power
State like new
At local norms ---------
Status under power

About this seller

Client type User – small or medium company
Active since 2022
Offers online 3
Last activity June 20, 2024

Here is a selection of similar machines

Graule AS450 Slitting saw for metal