Granulation Line GP 1-130:

Dosator shnekovy
Predetermined for half-homogeneous flare-up of ground or agglomerated plastic mass and further processing through the threshold, with the last incisions of the granules in the threshold granule.
The extruder can be used as a dispenser for "rifles", which allow it to pass into the percussion zone through the constipation plate (crushed limb).
It is prepared with 2 degasations

Ш Ham diameter: 100 mm
 Range regulation я speeds: 9-80 rpm
Бу Bunker volume: 0.25 m3
Щ Engine power: 2.2 kW
 Dimensions: 1340x900x1040 mm

Extruder GP-130
Predetermined for half-homogeneous flare-up of ground or agglomerated plastic mass and further processing through the threshold, with the last incisions of the granules in the threshold granule.
The extruder can be used as a dispenser for "rifles", which are allowed to pass through the contaminated zone through the sloping hulls (crushed booty).
It is prepared with 2 degasations

 Production: 450 kg / h
Ре Prefabricated materials: PVD, PND, PP, PA, ABS-plastic, PS, PVH
Ш Ham diameter: 130 mm
Щ Coat depth: 4655 mm
Бо Working trough: 4455 mm
 L / D (height / diameter ratio) 34
Ь Filter diameter: 167 mm
 Quantity of zone heating: 10 pcs
А Frequency of rolling stock driver: 1500 rpm
 Power of electric heating: 90 kW
Щ Power electric heating heater: 55 kW
 Allowable я ambient air temperature: +15 +10 C
Бо Operating tension: 380 B
Пера Operating tension: 220 B
 Frequency Electrosets: 50 Gc
 Introduction of main water supply: 0.2-0.6
Ба Dimensions: 5750x1910x1610 mm
 Mass: 5200 kg

Внана охлаждения
Predestined for cooling, tight from extruder. Osnashenena patrubkami podvoda and otvoda cooling water.
 Dimensions: 3000x606x1050

Strong granulator
Predetermined for cutting cold-water polymer strings into cylindrical granules. Diameter of the lead in the granulator is tight, in sections it is not necessary to cut 3-4 mm.

Щ Power supply of electric drive: 7.5 kW
Ко Speed ​​of return of the electric power switch: 1500 rpm
Ко Refrigeration rate: 140-1200 rpm
Ло Силовая передача: Клиноременная
 Milling cutter: 150x200 mm, toothpick 24
Ме Modification of institutions speeds up milling cutters
 Dimensions of stationary knife: 7x23x210 mm
Ли Quantity of stationary knives: 1 pc
 Operating voltage: 380 В.
 Frequency: 50 Gc
 Dimensions: 1180x940x1580
 Mass: 700 kg


Features constructions
Stansta струkstrudera consists of a fundamental frame and a standing trumpet of material. The shape and mood of several apartments determines the type of machine.
Fundamental frame represents a room of built-in construction, consisting of a profiled profile and is supported by a basic support for the institutions of reducer, electric motor, stand trumpet material and hydraulic. To strengthen the constructions, frames are used, made of solid stone stalls.
Reducer connected to the fundamental frame through a shallow bolt. The basic construction of the body of the reducer has a horizontal position with a different axis. In such an education, the simple installation of cylindrical sixes and valves is not possible. К торцевой поверхности редуктора в месте выхода вала смнтирован упорный узел (фланец, корпус, упорный подшипник). On the necessary valve, the mounting bracket is insisted on for the transmitters to return from the roller coil.
The system heats up and maintains temperatures. The pipe breaks down into 8 zones. Golova леelevaя, flancés gidroshibera also contain each zone. Temperature support system allows to set and automatically maintain individual temperature as a zone.
Shibber with hydraulic shift filter represents a room assembly structure, the basic element of which is a filter, which serves to clean the stream of flammable masses from the soil. The filter is filled from the stalls and is installed in the open air conditioner. Sling connected with the help of screw bolts, hydrocylindrom, corpus which is restored on the carcass.
Ненек является basic элементом кструдера и предназначен для транспортирования разплава под давлением в формующую голову. A snack prepared in the form of a vintage with a large jar in accordance with the requirements, preferable to the preparation of the snack.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Capacity 500 kg/h
Power 90 kW
Screw diameter 130 mm
Recycled material
-------------------
Worked hours
Hours under power
State new
At local norms ---------
Status
Client type Machinery manufacturer
Active since 2020
Offers online 7
Last activity March 12, 2024

Description

Granulation Line GP 1-130:

Dosator shnekovy
Predetermined for half-homogeneous flare-up of ground or agglomerated plastic mass and further processing through the threshold, with the last incisions of the granules in the threshold granule.
The extruder can be used as a dispenser for "rifles", which allow it to pass into the percussion zone through the constipation plate (crushed limb).
It is prepared with 2 degasations

Ш Ham diameter: 100 mm
 Range regulation я speeds: 9-80 rpm
Бу Bunker volume: 0.25 m3
Щ Engine power: 2.2 kW
 Dimensions: 1340x900x1040 mm

Extruder GP-130
Predetermined for half-homogeneous flare-up of ground or agglomerated plastic mass and further processing through the threshold, with the last incisions of the granules in the threshold granule.
The extruder can be used as a dispenser for "rifles", which are allowed to pass through the contaminated zone through the sloping hulls (crushed booty).
It is prepared with 2 degasations

 Production: 450 kg / h
Ре Prefabricated materials: PVD, PND, PP, PA, ABS-plastic, PS, PVH
Ш Ham diameter: 130 mm
Щ Coat depth: 4655 mm
Бо Working trough: 4455 mm
 L / D (height / diameter ratio) 34
Ь Filter diameter: 167 mm
 Quantity of zone heating: 10 pcs
А Frequency of rolling stock driver: 1500 rpm
 Power of electric heating: 90 kW
Щ Power electric heating heater: 55 kW
 Allowable я ambient air temperature: +15 +10 C
Бо Operating tension: 380 B
Пера Operating tension: 220 B
 Frequency Electrosets: 50 Gc
 Introduction of main water supply: 0.2-0.6
Ба Dimensions: 5750x1910x1610 mm
 Mass: 5200 kg

Внана охлаждения
Predestined for cooling, tight from extruder. Osnashenena patrubkami podvoda and otvoda cooling water.
 Dimensions: 3000x606x1050

Strong granulator
Predetermined for cutting cold-water polymer strings into cylindrical granules. Diameter of the lead in the granulator is tight, in sections it is not necessary to cut 3-4 mm.

Щ Power supply of electric drive: 7.5 kW
Ко Speed ​​of return of the electric power switch: 1500 rpm
Ко Refrigeration rate: 140-1200 rpm
Ло Силовая передача: Клиноременная
 Milling cutter: 150x200 mm, toothpick 24
Ме Modification of institutions speeds up milling cutters
 Dimensions of stationary knife: 7x23x210 mm
Ли Quantity of stationary knives: 1 pc
 Operating voltage: 380 В.
 Frequency: 50 Gc
 Dimensions: 1180x940x1580
 Mass: 700 kg


Features constructions
Stansta струkstrudera consists of a fundamental frame and a standing trumpet of material. The shape and mood of several apartments determines the type of machine.
Fundamental frame represents a room of built-in construction, consisting of a profiled profile and is supported by a basic support for the institutions of reducer, electric motor, stand trumpet material and hydraulic. To strengthen the constructions, frames are used, made of solid stone stalls.
Reducer connected to the fundamental frame through a shallow bolt. The basic construction of the body of the reducer has a horizontal position with a different axis. In such an education, the simple installation of cylindrical sixes and valves is not possible. К торцевой поверхности редуктора в месте выхода вала смнтирован упорный узел (фланец, корпус, упорный подшипник). On the necessary valve, the mounting bracket is insisted on for the transmitters to return from the roller coil.
The system heats up and maintains temperatures. The pipe breaks down into 8 zones. Golova леelevaя, flancés gidroshibera also contain each zone. Temperature support system allows to set and automatically maintain individual temperature as a zone.
Shibber with hydraulic shift filter represents a room assembly structure, the basic element of which is a filter, which serves to clean the stream of flammable masses from the soil. The filter is filled from the stalls and is installed in the open air conditioner. Sling connected with the help of screw bolts, hydrocylindrom, corpus which is restored on the carcass.
Ненек является basic элементом кструдера и предназначен для транспортирования разплава под давлением в формующую голову. A snack prepared in the form of a vintage with a large jar in accordance with the requirements, preferable to the preparation of the snack.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Capacity 500 kg/h
Power 90 kW
Screw diameter 130 mm
Recycled material
-------------------
Worked hours
Hours under power
State new
At local norms ---------
Status

About this seller

Client type Machinery manufacturer
Active since 2020
Offers online 7
Last activity March 12, 2024

Here is a selection of similar machines

Granplast GP-130 Granulator