Sorry, this offer is no longer available on Exapro

Globecore CMM Transformer

Here is a selection of similar machines

The CMM-6R Light is designed for the regeneration of transformer and cable oils by their transmission through a special sorbent (Fuller’s earth). The unit proved to be efficient due to its ability to reactivate the sorbent without removing it from the columns. Another benefit is its ability to work while directly connected to the transformer with a TSS system installed. It is also possible to install an inhibitor input device.

CMM-6R Light can work in two modes:

oil regeneration mode;
sorbent reactivation mode.
The electrical parts of the unit is controlled from the control cabinet board, in which the switching, monitoring, and measuring equipment are installed.

One fill of the sorbent is enough for about 300 cycles.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Length x width x height 2820.0 × 1570.0 × 1520.0
Weight 2100 kg
Worked hours 24 hours
Hours under power 24 hours
State good
At local norms yes
Status visible
Datasheet Globecore CMM
Client type Machinery manufacturer
Active since 2020
Offers online 0
Last activity July 21, 2023

Description

The CMM-6R Light is designed for the regeneration of transformer and cable oils by their transmission through a special sorbent (Fuller’s earth). The unit proved to be efficient due to its ability to reactivate the sorbent without removing it from the columns. Another benefit is its ability to work while directly connected to the transformer with a TSS system installed. It is also possible to install an inhibitor input device.

CMM-6R Light can work in two modes:

oil regeneration mode;
sorbent reactivation mode.
The electrical parts of the unit is controlled from the control cabinet board, in which the switching, monitoring, and measuring equipment are installed.

One fill of the sorbent is enough for about 300 cycles.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Length x width x height 2820.0 × 1570.0 × 1520.0
Weight 2100 kg
Worked hours 24 hours
Hours under power 24 hours
State good
At local norms yes
Status visible

About this seller

Client type Machinery manufacturer
Active since 2020
Offers online 0
Last activity July 21, 2023