Description
Bevel gear generator
Cone distance:
-Max.: 805 mm
-Min.: 0
Pitch angle (max.) shafts at 90°: 84°18'
Pitch angle (min.): 5°42'
Extreme ratio: 10:1
Diametral pitch (coarsest): 8.5 Mod.
Index range: 5 to 100 inclusive and most numbers to 200
Pitch diameter:
-Ratio: 10 : 1
--Face: 25 mm
--Cone distance: 283 mm
--Largest pitch diameter of gear: 565 mm
--Largest pitch diameter of pinion: 57 mm
--Face: 51 mm
--Cone distance: 295 mm
--Largest pitch diameter of gear: 591 mm
--Largest pitch diameter of pinion: 59 mm
--Face: 89 mm
--Cone distance: 305 mm
--Largest pitch diameter of gear: 610 mm
--Largest pitch diameter of pinion: 64 mm
-Ratio: 1 : 1
--Face: 25 mm
--Cone distance: 283 mm
--Largest pitch diameter of gear: 400 mm
--Largest pitch diameter of pinion: 400 mm
--Face: 51 mm
--Cone distance: 295 mm
--Largest pitch diameter of gear: 419 mm
--Largest pitch diameter of pinion: 419 mm
--Face: 89 mm
--Cone distance: 305 mm
--Largest pitch diameter of gear: 432 mm
--Largest pitch diameter of pinion: 432 mm
Work spindle
Diameter of taper hole at large end: 100 mm
Taper per foot: 15 mm
Depth of taper: 150 mm
Diameter of hole through: 78 mm
Spindle nose to machine center: 64 mm to 381 mm
Speeds and feeds
Cutter speeds (strokes per minute):
-60 cycle: 64 to 495
-50 cycle: 51 to 420
Feeds (seconds per tooth):
-60 cycle: 10 to 131
-50 cycle: 11 to 128
Electrical equipment
Main motor: 3 HP, 1800 rpm, 1800 rpm (60 cycle), 1500 rpm (50 cycle)
Hydraulic pump motor: 1.5 HP, 1200 rpm (60 cycle), 1000 rpm (50 cycle)
Cutting oil pump motor: 0.5 HP, 3600 rpm (60 cycle), 3000 rpm (50 cycle)
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase