CNC Grinding Machine for Spiral and Hypoid Bevel Gears
Model PHOENIXHG 200 Year 1997
Max. external Ø of workpiece 215 mm
Tooth profile, height x width 16 x 40.65 mm
No. of teeth 5 – 200
Max. tooth ratio 1 : 10
Grinding wheel Ø 51 – 190 mm
Grinding wheel speeds 1,000 – 6,000 rpm
X Axis (horizontal) 152 mm
Y Axis (vertical) 178 mm
Z Axis (slide base plate) 304 mm
Distance from middle of machine to middle of workspindle 115 mm
Axial speed 125 mm/sec Workpiece speeds 0 – 30 rpm
Workspindle bore, conical 3 29/32 inch
Total electrical load 20 kW - 380 V – 50 Hz
Weight, approx. 10,000 kg

Accessories / Special Features:
* FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters.
* Extensive coolant equipment with filter system, band filter, etc.
* Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing.
* Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a
cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional “dressable” aluminium oxide
material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and
quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Max wheel Gear Ø 150 mm
CNC type Fanuc 150 MB
Max spindle speed 6000 rpm
Motor power 20 kW
-------------------
Weight 10000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2019
Offers online 145
Last activity March 27, 2024

Description

CNC Grinding Machine for Spiral and Hypoid Bevel Gears
Model PHOENIXHG 200 Year 1997
Max. external Ø of workpiece 215 mm
Tooth profile, height x width 16 x 40.65 mm
No. of teeth 5 – 200
Max. tooth ratio 1 : 10
Grinding wheel Ø 51 – 190 mm
Grinding wheel speeds 1,000 – 6,000 rpm
X Axis (horizontal) 152 mm
Y Axis (vertical) 178 mm
Z Axis (slide base plate) 304 mm
Distance from middle of machine to middle of workspindle 115 mm
Axial speed 125 mm/sec Workpiece speeds 0 – 30 rpm
Workspindle bore, conical 3 29/32 inch
Total electrical load 20 kW - 380 V – 50 Hz
Weight, approx. 10,000 kg

Accessories / Special Features:
* FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters.
* Extensive coolant equipment with filter system, band filter, etc.
* Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing.
* Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a
cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional “dressable” aluminium oxide
material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and
quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Max wheel Gear Ø 150 mm
CNC type Fanuc 150 MB
Max spindle speed 6000 rpm
Motor power 20 kW
-------------------
Weight 10000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 145
Last activity March 27, 2024

Here is a selection of similar machines

Gleason PHOENIXHG 200 Cnc gear hobbing machine