Tablet coating Glatt GC1500
|Capacity (kg)||400.0 kg|
|Volume (max)||500 L|
|Pan Ø||1500.0 mm|
|Length x width x height||4200.0 mm × 2100.0 mm × 2750.0 mm|
|Hours under power|
|At local norms||---------|
Length 4200 mm
Width 2100 mm
Height 2750 mm
Weight 3000 kg
Frequency 50 Hz Voltage 400 Volt
Motor power / drum drive 4.5 Kw
Air volume 5000 m3/h
Maximum workable capacity 500 L
Drum diameter 1500 mm
Min - max load 150-400 kg
Inlet air temperature 100°C
Inlet - Outlet fan 30 kW/ 400 V/ 50 Hz
Perforated Drum Coater made in AISI 316 stainless steel in which any formed products can be sprayed with coating solution and simultaneously or intermittently dried.
Air for drying is blown into the centre of the drum through the front of the machine by an air inlet system projecting into the drum and flows in the same direction as the sprayed coating solution onto the tablet bed.
Drying air flowing through the tablet bed is extracted by an exhaust air fan through the perforation beneath the tablet bed and specially adapted exhaust air channels.
A rotary disc valve in the technical area of the coater controls channeling of the exhaust air by maintaining a constant cross section of the exhaust air channels.
Coating drum outer wall fully enclosed.
Effective use of drying energy.
EXTRA COMPONENTS PRESENT WITH THE MACHINE:
Multi head peristaltic pump skid with wall mounted controls
Inlet air handling unit and exhaust filtration skid with explosion suppression
Electrical and pneumatic control panels and WiP booster station
Dust remover INFASTAUB
Pleated element filter for separation of dry, not adhesive dusts
Spraying system with movable spraying arm and 5 nozzles
Spray pump with solution preparation vessel
High output ventilator
Please note that this description may have been translated automatically. Contact us for further information.