Used Glatt GC-1500 Tablet coating machine
|Capacity (kg)||400.0 kg|
|Volume (max)||500 L|
|Pan Ø||1500.0 mm|
|Length x width x height||4200.0 mm × 2100.0 mm × 2750.0 mm|
|Hours under power|
|At local norms||---------|
GLATT GC-1500 - Tablet coating machine used
Glatt coaters are ideal for film and sugar coating of tablets, pellets, granules and other formed products. An efficient performer for your coating processes on a production scale, the GC delivers benefits that are specific to Glatt, such as the horizontal air flow through the fully perforated drum, and features a housing design which can be cleaned with ease. Last but not least, the system is extremely simple to maintain thanks to the unique cantilever mounting and the drum‘s direct drive. The modular concept also offers a high degree of flexibility for customized adaptations. Thanks to the low-cost modular design, the GC is perfectly adapted to today‘s requirements.
SECTORS OF USE:
Pharmaceutical, chemical, food, dietary, medical devices.
Perforated Drum Coater made in AISI 316 stainless steel in which any formed products can be sprayed with coating solution and simultaneously or intermittently dried. Air for drying is blown into the centre of the drum through the front of the machine by an air inlet system projecting into the drum and flows in the same direction as the sprayed coating solution onto the tablet bed. Drying air flowing through the tablet bed is extracted by an exhaust air fan through the perforation beneath the tablet bed and specially adapted exhaust air channels. A rotary disc valve in the technical area of the coater controls channeling of the exhaust air by maintaining a constant cross section of the exhaust air channels. Coating drum outer wall fully enclosed. Effective use of drying energy.
EXTRA COMPONENTS PRESENT WITH THE MACHINE:
- multi head peristaltic pump skid with wall mounted controls
- inlet air handling unit and exhaust filtration skid with explosion suppression
- electrical and pneumatic control panels and WiP booster station
- dust remover INFASTAUB - Pleated element filter for separation of dry, not adhesive dusts
- Spraying system with moveable spraying arm and 5 nozzles, spray pump with solution preparation vessel
- high output ventilator
Length mm 4200
Width mm 2100
Height mm 2750
Net weight Kg 3000
Frequency Hz 50
Voltage Volt 400
Motor power/drum drive Kw 4.5
Air volume 5000m³/h
Maximum workable capacity 500 L
Drum diameter 1500 mm
Min-max load 150-400 kg
Inlet air temperature 100°C
Inlet-outlet fan 30 kW/400V/ 50Hz
Please note that this description may have been translated automatically. Contact us for further information.