The GILDEMEISTER MF TWIN 65Y CNC lathe with a bar feeder was manufactured in 1999 in Germany. A machine with wide processing capabilities allows you to fully automate the production process while maintaining increased accuracy and, at the same time, low operating costs. Thanks to its stable structure, extensive equipment and emphasis on high efficiency, the MF TWIN 65Y CNC turning center will be perfect for even the most demanding challenges.

The GILDEMEISTER MF TWIN 65 double-spindle CNC lathe processes workpieces with a maximum diameter of 200 mm, using tools taken from 12-position tool heads (upper and lower). In order to facilitate the removal of chips created during production, there is a 45° inclined bed inside the machine's working space, with high stiffness. Thanks to this solution, the chips fall directly onto the conveyor, which transports them to a container located outside the working area. The GILDEMEISTER CNC automatic lathe is offered with extensive equipment, including: IRCO SiMag bar feeder, Y axis, workpiece transporter and additional equipment. The total weight of the machine is approximately 6,500 kg.

Technical parameters of the GILDEMEISTER MF TWIN 65Y turning center

General information
- flight over the bed: 240 mm
- maximum turning diameter: 200 mm
- feeds in the X/Y/Z axis: 190/40/555 mm
- accelerated feeds in the X/Y/Z axis: 20/7.5/30 m/min
- feed force in the X/Y/Z axes: 400/700/700 daN
- X/Y/Z axis resolution: 0.001 mm
- distance between spindles: 800 mm
- bed inclination angle: 45°
- type of guides: roller guides
- power supply: 3x 400 V; 50 Hz

Main spindle
- maximum diameter of the mounting bracket: 200 mm
- maximum rod diameter: 65 mm
- spindle tip: 170 h5 mm
- hole in the spindle: 79 mm
- front bearing diameter: 120 mm
- spindle power (40/100% ED): 28/21 kW
- spindle speed: 25-5000 rpm
- rated spindle speed: 850 rpm
- maximum torque of the main spindle (40/100% ED): 320/240 Nm
- C axis
- accelerated feed of the C axis: 250 rpm
- torque of the C axis: 200 Nm
- C axis resolution: 0.025°

Intercepting spindle
- maximum diameter of the mounting bracket: 200 mm
- maximum rod diameter: 42 mm
- spindle tip: 140 h5 mm
- hole in the spindle: 56 mm
- front bearing diameter: 90 mm
- spindle power (40/100% ED): 18/14 kW
- spindle speed: 31-6300 rpm
- rated spindle speed: 1000 rpm
- maximum torque of the intercepting spindle (40/100% ED): 130/173 Nm
- C axis
- accelerated feed of the C axis: 250 rpm
- torque of the C axis: 120 Nm
- C axis resolution: 0.025°

Tool heads
- number of tools (upper head / lower head): 12/12
- diameter of DIN 69880 tool holders: 30 mm
- power (40/100% ED): 7/5 kW
- maximum torque (40/100% ED): 22/15 Nm
- maximum rotational speed: 40-4200 rpm

Hydraulic unit
- oil tank capacity: approx. 25 l
- pump power: 1.1 kW
- maximum working pressure: 80 bar

Cooling unit
- coolant tank capacity: 200 l
- pump power: 1.65 kW
- flow at 6 bar pressure: 50 l/min

Dimensions and weight
- length with chip conveyor: 4770 mm
- width with control cabinet: 2220 mm
- height with control cabinet: 1950 mm
- machine weight: approx. 6500 kg

Equipment of the MF TWIN 65 Y lathe

- CNC control: SIEMENS SINUMERIK 840 C
- bar feeder: IRCO SiMag
- 3-jaw hydraulic chuck: BISON (2 pcs.)
- hydraulic sleeve chuck: HAINBUCH (2 pcs.)
- upper tool head with Y axis
- lower tool head
- intercepting spindle
- powered tools
- sleeves for sleeve holder with diameter:
6, 18, 28, 29, 30, 34, 45, 50, 52, 58 mm (1 pc.)
8, 10, 12, 15, 16, 25, 35, 40, 55, 60 mm (2 pcs.)
- gripper for receiving the finished detail
- straight driven holders (3 pcs.)
- driven angular holders 90° (2 pcs.)
- knife holders (9 pcs)
- drill/boring bar holders (5 pcs.)
- detail transporter
- chip conveyor
- coolant filtering system: KNOLL

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Turning Ø 200 mm
Ø above the bed 240 mm
Length between centers 800 mm
Type of CNC Siemens Sinumerik 840 C
X-axis 190 mm
Z-axis 555 mm
Spindle taper
Spindle bore 65 mm
Number of tools on turret 12
Turning speed 5000 rpm
Spindle motor power 28 kW
Tailstock no
Bar feeder yes
-------------------
Length x width x height 4770.0 × 2220.0 × 1950.0
Weight 6500 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Gildemeister MF Twin 65Y
Client type Reseller
Active since 2010
Offers online 377
Last activity March 28, 2024

Description

The GILDEMEISTER MF TWIN 65Y CNC lathe with a bar feeder was manufactured in 1999 in Germany. A machine with wide processing capabilities allows you to fully automate the production process while maintaining increased accuracy and, at the same time, low operating costs. Thanks to its stable structure, extensive equipment and emphasis on high efficiency, the MF TWIN 65Y CNC turning center will be perfect for even the most demanding challenges.

The GILDEMEISTER MF TWIN 65 double-spindle CNC lathe processes workpieces with a maximum diameter of 200 mm, using tools taken from 12-position tool heads (upper and lower). In order to facilitate the removal of chips created during production, there is a 45° inclined bed inside the machine's working space, with high stiffness. Thanks to this solution, the chips fall directly onto the conveyor, which transports them to a container located outside the working area. The GILDEMEISTER CNC automatic lathe is offered with extensive equipment, including: IRCO SiMag bar feeder, Y axis, workpiece transporter and additional equipment. The total weight of the machine is approximately 6,500 kg.

Technical parameters of the GILDEMEISTER MF TWIN 65Y turning center

General information
- flight over the bed: 240 mm
- maximum turning diameter: 200 mm
- feeds in the X/Y/Z axis: 190/40/555 mm
- accelerated feeds in the X/Y/Z axis: 20/7.5/30 m/min
- feed force in the X/Y/Z axes: 400/700/700 daN
- X/Y/Z axis resolution: 0.001 mm
- distance between spindles: 800 mm
- bed inclination angle: 45°
- type of guides: roller guides
- power supply: 3x 400 V; 50 Hz

Main spindle
- maximum diameter of the mounting bracket: 200 mm
- maximum rod diameter: 65 mm
- spindle tip: 170 h5 mm
- hole in the spindle: 79 mm
- front bearing diameter: 120 mm
- spindle power (40/100% ED): 28/21 kW
- spindle speed: 25-5000 rpm
- rated spindle speed: 850 rpm
- maximum torque of the main spindle (40/100% ED): 320/240 Nm
- C axis
- accelerated feed of the C axis: 250 rpm
- torque of the C axis: 200 Nm
- C axis resolution: 0.025°

Intercepting spindle
- maximum diameter of the mounting bracket: 200 mm
- maximum rod diameter: 42 mm
- spindle tip: 140 h5 mm
- hole in the spindle: 56 mm
- front bearing diameter: 90 mm
- spindle power (40/100% ED): 18/14 kW
- spindle speed: 31-6300 rpm
- rated spindle speed: 1000 rpm
- maximum torque of the intercepting spindle (40/100% ED): 130/173 Nm
- C axis
- accelerated feed of the C axis: 250 rpm
- torque of the C axis: 120 Nm
- C axis resolution: 0.025°

Tool heads
- number of tools (upper head / lower head): 12/12
- diameter of DIN 69880 tool holders: 30 mm
- power (40/100% ED): 7/5 kW
- maximum torque (40/100% ED): 22/15 Nm
- maximum rotational speed: 40-4200 rpm

Hydraulic unit
- oil tank capacity: approx. 25 l
- pump power: 1.1 kW
- maximum working pressure: 80 bar

Cooling unit
- coolant tank capacity: 200 l
- pump power: 1.65 kW
- flow at 6 bar pressure: 50 l/min

Dimensions and weight
- length with chip conveyor: 4770 mm
- width with control cabinet: 2220 mm
- height with control cabinet: 1950 mm
- machine weight: approx. 6500 kg

Equipment of the MF TWIN 65 Y lathe

- CNC control: SIEMENS SINUMERIK 840 C
- bar feeder: IRCO SiMag
- 3-jaw hydraulic chuck: BISON (2 pcs.)
- hydraulic sleeve chuck: HAINBUCH (2 pcs.)
- upper tool head with Y axis
- lower tool head
- intercepting spindle
- powered tools
- sleeves for sleeve holder with diameter:
6, 18, 28, 29, 30, 34, 45, 50, 52, 58 mm (1 pc.)
8, 10, 12, 15, 16, 25, 35, 40, 55, 60 mm (2 pcs.)
- gripper for receiving the finished detail
- straight driven holders (3 pcs.)
- driven angular holders 90° (2 pcs.)
- knife holders (9 pcs)
- drill/boring bar holders (5 pcs.)
- detail transporter
- chip conveyor
- coolant filtering system: KNOLL

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Turning Ø 200 mm
Ø above the bed 240 mm
Length between centers 800 mm
Type of CNC Siemens Sinumerik 840 C
X-axis 190 mm
Z-axis 555 mm
Spindle taper
Spindle bore 65 mm
Number of tools on turret 12
Turning speed 5000 rpm
Spindle motor power 28 kW
Tailstock no
Bar feeder yes
-------------------
Length x width x height 4770.0 × 2220.0 × 1950.0
Weight 6500 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2010
Offers online 377
Last activity March 28, 2024

Here is a selection of similar machines

Gildemeister MF TWIN 65Y cnc lathe