Price on request
Make an offer| Power in tons | 800 T |
| Type | H-Frame |
| Table length | 3700 mm |
| Table width | 2700 mm |
| Ram stroke | 1000 mm |
| Nbr of strokes/min | 1000 |
| Distance between columns | 3720 mm |
| Engine Power | 75 kW |
| ------------------- | |
| Length x width x height | 370.0 × 3600.0 × 9000.0 |
| Weight | 162000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 17/03/2026 |
This listing features a GIGANT G2-800/2 hydraulic press with a total pressing power of 800 tons plus an additional 350 tons from sheet presses. The main press includes two pistons, each capable of 800 tons, and a return power of 100 tons. It has a ram stroke of 1000 mm and operates at a maximum working pressure of 250 Bar. The pump flow rate is 260 liters per minute, with the movable table capable of approaching at 300 mm per second, working speeds between 3 to 9 mm per second, and a return speed of 130 mm per second. The press is powered by a 75 kW electric motor running at 1000 revolutions per minute, supplied with 380/660 Volt at 50 Hz. The distance between the uprights is 3720 mm, and the maximum light between the columns is 1600 mm. The fixed and mobile working tables both measure 3700 mm by 2700 mm. Additionally, the sheet press section consists of six presses, each with 350 tons capacity and a stroke of 400 mm, operating at a maximum pressure of 240 Bar with table dimensions of 3200 mm by 2200 mm. The overall dimensions of the press are approximately 7200 mm in length, 3600 mm in width, and 9000 mm in height, with an approximate weight of 162,000 kg. The machine is of the H-Frame type.
The press is equipped with a yellow sliding door and vertical rails for guiding this door, as well as a metal platform inside for placing workpieces. A yellow safety light curtain or protective guard is mounted vertically on the side of the press, enhancing operational safety. The control panel includes multiple pressure gauges marked in French, rotary knobs, various colored indicator lights, and switches for operation and safety. There is also a large metal cabinet housing electrical or hydraulic components, featuring control buttons and indicator lights on its door. The machine shows visible signs of wear and dirt on the press surface, platform, safety guard, control panel, and cabinet, consistent with extended industrial use. The surrounding wall and floor also exhibit typical industrial wear and some debris. This is a used machine offered as-is, suitable for heavy-duty hydraulic pressing applications requiring high tonnage and large working surfaces.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Total press power ton 800+350
Pistons: n.2 ton 800
Return power ton 100
Movable table or piston stroke mm 1000
Max working pressure Bar 250
Pump l/mn 260
Movable table approach speed mm/1'' 300
Moving table working speed mm/1'' 3-9
Movable table return speed mm/1'' 130
Electric motors: n.1 kW 75
Number of revolutions per minute first g/1' 1000
Voltage Volt 380/660 Hz 50
Max light between clouds mm 1600
Light between uprights mm 3720
Dimensions of fixed working table mm 3700x2700
Mobile table dimensions mm 3700x2700
Sheet press: n.6 ton 350
Sheet press stroke mm 400
Max working pressure Bar 240
Sheet press table size mm 3200x2200
Press overall dimensions mm 7200x3600x9000
Approx. press weight Kg 162000
USED MACHINE
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 35 |
| Last activity | April 21, 2026 |
Bentivoglio Macchine Utensili s.r.l. is a distinguished Italian company specializing in the sale and distribution of high-quality machine tools. With decades of experience in the industry, Bentivoglio has established itself as a trusted partner for businesses seeking reliable and innovative solutions for their machining needs. The company prides itself on its extensive portfolio, which includes a wide range of products designed to meet the diverse requirements of various sectors, from automotive to aerospace. At the heart of Bentivoglio's success is its commitment to customer satisfaction. The company not only offers top-tier machinery but also provides expert consultation and support to ensure that clients make informed decisions tailored to their specific applications. Their team of knowledgeable professionals is dedicated to helping customers optimize their production processes, enhancing efficiency and productivity. Bentivoglio Macchine Utensili s.r.l. stands out in the competitive landscape by combining tradition with innovation. The company continually invests in the latest technologies and industry advancements, ensuring that their offerings remain at the forefront of the market. By choosing Bentivoglio, clients gain access to cutting-edge solutions that drive their business forward, making it an ideal partner for those looking to elevate their manufacturing capabilities.
Total press power ton 800+350
Pistons: n.2 ton 800
Return power ton 100
Movable table or piston stroke mm 1000
Max working pressure Bar 250
Pump l/mn 260
Movable table approach speed mm/1'' 300
Moving table working speed mm/1'' 3-9
Movable table return speed mm/1'' 130
Electric motors: n.1 kW 75
Number of revolutions per minute first g/1' 1000
Voltage Volt 380/660 Hz 50
Max light between clouds mm 1600
Light between uprights mm 3720
Dimensions of fixed working table mm 3700x2700
Mobile table dimensions mm 3700x2700
Sheet press: n.6 ton 350
Sheet press stroke mm 400
Max working pressure Bar 240
Sheet press table size mm 3200x2200
Press overall dimensions mm 7200x3600x9000
Approx. press weight Kg 162000
USED MACHINE
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 800 T |
| Type | H-Frame |
| Table length | 3700 mm |
| Table width | 2700 mm |
| Ram stroke | 1000 mm |
| Nbr of strokes/min | 1000 |
| Distance between columns | 3720 mm |
| Engine Power | 75 kW |
| ------------------- | |
| Length x width x height | 370.0 × 3600.0 × 9000.0 |
| Weight | 162000 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 17/03/2026 |
This listing features a GIGANT G2-800/2 hydraulic press with a total pressing power of 800 tons plus an additional 350 tons from sheet presses. The main press includes two pistons, each capable of 800 tons, and a return power of 100 tons. It has a ram stroke of 1000 mm and operates at a maximum working pressure of 250 Bar. The pump flow rate is 260 liters per minute, with the movable table capable of approaching at 300 mm per second, working speeds between 3 to 9 mm per second, and a return speed of 130 mm per second. The press is powered by a 75 kW electric motor running at 1000 revolutions per minute, supplied with 380/660 Volt at 50 Hz. The distance between the uprights is 3720 mm, and the maximum light between the columns is 1600 mm. The fixed and mobile working tables both measure 3700 mm by 2700 mm. Additionally, the sheet press section consists of six presses, each with 350 tons capacity and a stroke of 400 mm, operating at a maximum pressure of 240 Bar with table dimensions of 3200 mm by 2200 mm. The overall dimensions of the press are approximately 7200 mm in length, 3600 mm in width, and 9000 mm in height, with an approximate weight of 162,000 kg. The machine is of the H-Frame type.
The press is equipped with a yellow sliding door and vertical rails for guiding this door, as well as a metal platform inside for placing workpieces. A yellow safety light curtain or protective guard is mounted vertically on the side of the press, enhancing operational safety. The control panel includes multiple pressure gauges marked in French, rotary knobs, various colored indicator lights, and switches for operation and safety. There is also a large metal cabinet housing electrical or hydraulic components, featuring control buttons and indicator lights on its door. The machine shows visible signs of wear and dirt on the press surface, platform, safety guard, control panel, and cabinet, consistent with extended industrial use. The surrounding wall and floor also exhibit typical industrial wear and some debris. This is a used machine offered as-is, suitable for heavy-duty hydraulic pressing applications requiring high tonnage and large working surfaces.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 35 |
| Last activity | April 21, 2026 |
Bentivoglio Macchine Utensili s.r.l. is a distinguished Italian company specializing in the sale and distribution of high-quality machine tools. With decades of experience in the industry, Bentivoglio has established itself as a trusted partner for businesses seeking reliable and innovative solutions for their machining needs. The company prides itself on its extensive portfolio, which includes a wide range of products designed to meet the diverse requirements of various sectors, from automotive to aerospace. At the heart of Bentivoglio's success is its commitment to customer satisfaction. The company not only offers top-tier machinery but also provides expert consultation and support to ensure that clients make informed decisions tailored to their specific applications. Their team of knowledgeable professionals is dedicated to helping customers optimize their production processes, enhancing efficiency and productivity. Bentivoglio Macchine Utensili s.r.l. stands out in the competitive landscape by combining tradition with innovation. The company continually invests in the latest technologies and industry advancements, ensuring that their offerings remain at the forefront of the market. By choosing Bentivoglio, clients gain access to cutting-edge solutions that drive their business forward, making it an ideal partner for those looking to elevate their manufacturing capabilities.
Хидравлична преса GIGANT G2-800/2
Hydraulický lis GIGANT G2-800/2
GIGANT G2-800/2 Hydraulisk presse
GIGANT G2-800/2 Hydraulikpresse
Υδραυλική πίεση GIGANT G2-800/2
GIGANT G2-800/2 Hydraulic press
Prensa hidráulica GIGANT G2-800/2
Presse hydraulique GIGANT G2-800/2
Hidraulična preša GIGANT G2-800/2
GIGANT G2-800/2 Hidraulikus nyomás
Pressa idraulica GIGANT G2-800/2
Hidraulinis presas GIGANT G2-800/2
GIGANT G2-800/2 Hydraulische pers
Prasa hydrauliczna GIGANT G2-800/2
Pressão hidráulica GIGANT G2-800/2
Presa hidraulica GIGANT G2-800/2
GIGANT G2-800/2 Гидравлический пресс
Hidraulična presa GIGANT G2-800/2
GIGANT G2-800/2 Hydraulisk press
Hidrolik Pres GIGANT G2-800/2
EN
- Languages
English (GB)