Price on request
Make an offer| Manufacturer | GFM |
|---|---|
| Model | SKK10 |
| Year | 1999 |
| Location | India
|
| Category | Miscellaneous presses and forging machines |
| Product id | P260312597 |
| Language |
Преса GFM SKK10
Lis GFM SKK10
GFM SKK10 Presse
GFM SKK10 Presse
Πρέσα GFM SKK10
GFM SKK10 Press
Prensa GFM SKK10
Presse GFM SKK10
Preša GFM SKK10
GFM SKK10 Prés
Pressa GFM SKK10
GFM SKK10 Presas
GFM SKK10 Pers
Prasa GFM SKK10
Prensa GFM SKK10
Prese GFM SKK10
GFM SKK10 Пресс
Presa GFM SKK10
GFM SKK10 Press
Pres GFM SKK10
|
| Force | T |
| Stroke length | 600 mm |
| Table length | mm |
| Table width | mm |
| Engine Power | 75 kW |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | GFM SKK10 |
| Last availability date | 02/04/2026 |
This listing is for a GFM SKK10 forging machine, manufactured in 1999, equipped with a 75 kW forging motor. The machine features a stroke length of 600 mm and is designed for various forging applications including automotive parts such as shafts, steering shafts, camshafts, and barrels. It includes four hammers with a shear force per hammer of 1250 kN and operates at up to 1500 strokes per minute. The diameter adjustment range is 60 mm, with a forging eccentricity of 2.5 mm and a hammer length of 106 mm. The maximum bar or tube diameter it can handle is 58 mm.
The clamping head has a feed force range of 1 to 70 kN and a feed speed between 5 and 500 mm/s. It can accommodate workpieces up to 175 mm in length with a clamping head stroke of 600 mm. Additionally, the hydraulic counter-holder offers a maximum clamping force of 40 kN and a stroke of 200 mm.
The machine's electric equipment includes a 75 kW forging motor, a 2.2 kW clamping head motor, various hydraulic motors totaling 35 kW, and other consumers requiring 4.5 kW, along with auxiliary equipment at 1.3 kW. The total nominal power consumption is 118 kW.
For cooling, the system requires water at a pressure of 3 to 6 bar with a consumption rate of 9 m³/h between 35°C and 40°C. Compressed air is needed at a minimum pressure of 5 bar with a consumption of 1 Nm³/min. The total weight of the machine is approximately 30 tons.
This industrial forging press shows signs of use with some surface wear and minor stains on the base. It includes various hydraulic and mechanical components, electric motors, and gearboxes mounted on the base. Coiled cables and hoses are attached to the machine, some wrapped in plastic. The machine has been dismantled and was previously used for producing automotive shafts for Bosch. All technical documents and manuals are available.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Forging Equipment
Shear force per hammer : 1250 kN,
Number of hammers : 4,
Strokes per min : 1500 / min,
Diameter adjustment range : 60 mm,
Forging eccentricity : 2,5 mm,
Hammer length : 106 mm,
Bar/Tube diameter max : 58 mm,
Clamping head:
Feed force : 1-70 kN,
Feed : 5-500 mm/s,
Clamping head bed:
Workpiece length max : 175 mm,
Clamping head stroke : 600 mm,
Hydraulic counter-holder:
Clamping force max : 2-40 kN,
Stroke : 200 mm,
Electric Equipment:
Forging motor : 75 kW 400 V 50 Hz,
Clamping head motor : 2,2 kW 400 V 50 Hz,
Various hydraulic motors : 35 kW 400 V 50 Hz,
Remaining consumers : 4,5 kW 400 V 50 Hz,
Auxiliary equipment : 1,3 kW 220 V 50 Hz,
Total nominal power : 118 kW,
Cooling water:
Pressure : 3-6 bar
Consumption at 35°C entry / 40° C exit : 9 m3/h,
Air:
Pressure min : 5 bar
Consumption (air drawn in) : 1 Nm3/min.
Total weight : 30 tons.
Parts were being produced on this machine Automotive shafts (Bosch)
It can be used for any forging application: Automotive parts, shafts, steering shafts, cam shafts, barrels.
All technical documents and manuals available.
Item Condition: Good working condition, dismantled
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 20, 2026 |
Forging Equipment
Shear force per hammer : 1250 kN,
Number of hammers : 4,
Strokes per min : 1500 / min,
Diameter adjustment range : 60 mm,
Forging eccentricity : 2,5 mm,
Hammer length : 106 mm,
Bar/Tube diameter max : 58 mm,
Clamping head:
Feed force : 1-70 kN,
Feed : 5-500 mm/s,
Clamping head bed:
Workpiece length max : 175 mm,
Clamping head stroke : 600 mm,
Hydraulic counter-holder:
Clamping force max : 2-40 kN,
Stroke : 200 mm,
Electric Equipment:
Forging motor : 75 kW 400 V 50 Hz,
Clamping head motor : 2,2 kW 400 V 50 Hz,
Various hydraulic motors : 35 kW 400 V 50 Hz,
Remaining consumers : 4,5 kW 400 V 50 Hz,
Auxiliary equipment : 1,3 kW 220 V 50 Hz,
Total nominal power : 118 kW,
Cooling water:
Pressure : 3-6 bar
Consumption at 35°C entry / 40° C exit : 9 m3/h,
Air:
Pressure min : 5 bar
Consumption (air drawn in) : 1 Nm3/min.
Total weight : 30 tons.
Parts were being produced on this machine Automotive shafts (Bosch)
It can be used for any forging application: Automotive parts, shafts, steering shafts, cam shafts, barrels.
All technical documents and manuals available.
Item Condition: Good working condition, dismantled
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Force | T |
| Stroke length | 600 mm |
| Table length | mm |
| Table width | mm |
| Engine Power | 75 kW |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | GFM SKK10 |
| Last availability date | 02/04/2026 |
This listing is for a GFM SKK10 forging machine, manufactured in 1999, equipped with a 75 kW forging motor. The machine features a stroke length of 600 mm and is designed for various forging applications including automotive parts such as shafts, steering shafts, camshafts, and barrels. It includes four hammers with a shear force per hammer of 1250 kN and operates at up to 1500 strokes per minute. The diameter adjustment range is 60 mm, with a forging eccentricity of 2.5 mm and a hammer length of 106 mm. The maximum bar or tube diameter it can handle is 58 mm.
The clamping head has a feed force range of 1 to 70 kN and a feed speed between 5 and 500 mm/s. It can accommodate workpieces up to 175 mm in length with a clamping head stroke of 600 mm. Additionally, the hydraulic counter-holder offers a maximum clamping force of 40 kN and a stroke of 200 mm.
The machine's electric equipment includes a 75 kW forging motor, a 2.2 kW clamping head motor, various hydraulic motors totaling 35 kW, and other consumers requiring 4.5 kW, along with auxiliary equipment at 1.3 kW. The total nominal power consumption is 118 kW.
For cooling, the system requires water at a pressure of 3 to 6 bar with a consumption rate of 9 m³/h between 35°C and 40°C. Compressed air is needed at a minimum pressure of 5 bar with a consumption of 1 Nm³/min. The total weight of the machine is approximately 30 tons.
This industrial forging press shows signs of use with some surface wear and minor stains on the base. It includes various hydraulic and mechanical components, electric motors, and gearboxes mounted on the base. Coiled cables and hoses are attached to the machine, some wrapped in plastic. The machine has been dismantled and was previously used for producing automotive shafts for Bosch. All technical documents and manuals are available.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 20, 2026 |
EN
- Languages
English (GB)