Medical sterilizer

for decontamination of various materials including liquids in open containers. Built between two rooms in two walls.
Left service.
The internal dimensions of the camera are 672 x 672 x 1000 (W x H x D).
The volume of the camera is 452l.
The P 3203 software combination is designed to sterilize dishes, textiles, rubber plugs, filters and liquids.
All processes in this combination are designed to retain and disinfect wastewater from the sterilizer.
The parameters for each process can be adjusted and stored in memory for the respective program.
Vertically sliding doors with a lock when an obstacle occurs. Microcomputer-based PACS 3500 control unit.
Russified display.
Avanti control panel (8.4 "" color, touch / touch screen) on the loading and unloading side. A tight seal to prevent contamination - on the loading side (SPF flange).
Set of pipelines for connecting the cooling loop for recirculated water "" Built-in steam generator with heating from technical steam. The ISG steam generator operates on the principle of "falling film" evaporation.
The steam generator consists of a heat exchanger column made of AISI 316 SS. Primary steam supply pressure should be 5-7 bar, feed water should be of proper quality. Guides in the chamber for the rack. Insulation of pipelines with hot and cold water.
Cooling drain. Pressure gauges in the service area at the supply of media. Alarm for lack of media. USB port on the discharge side Printer for printing process data. Power supply: 380 V 3 phases, 50 Hz, neutral, ground Installation supervision, commissioning and individual testing of equipment, instructing operator and technical personnel, a set of documentation of the manufacturer in Russian. Options: Loading rack 1 pc., Additional shelf 2 pcs., Loading trolley 2 pcs., Shelf. For wall mounting the printer 1 pc., Spare parts kit 1 pc.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Length x width x height 1000.0 × 672.0 × 672.0
Weight 1650 kg
Worked hours 0 hours
Hours under power 0 hours
State new
At local norms ---------
Status
Client type User – small or medium company
Active since 2019
Offers online 4
Last activity June 18, 2023

Description

Medical sterilizer

for decontamination of various materials including liquids in open containers. Built between two rooms in two walls.
Left service.
The internal dimensions of the camera are 672 x 672 x 1000 (W x H x D).
The volume of the camera is 452l.
The P 3203 software combination is designed to sterilize dishes, textiles, rubber plugs, filters and liquids.
All processes in this combination are designed to retain and disinfect wastewater from the sterilizer.
The parameters for each process can be adjusted and stored in memory for the respective program.
Vertically sliding doors with a lock when an obstacle occurs. Microcomputer-based PACS 3500 control unit.
Russified display.
Avanti control panel (8.4 "" color, touch / touch screen) on the loading and unloading side. A tight seal to prevent contamination - on the loading side (SPF flange).
Set of pipelines for connecting the cooling loop for recirculated water "" Built-in steam generator with heating from technical steam. The ISG steam generator operates on the principle of "falling film" evaporation.
The steam generator consists of a heat exchanger column made of AISI 316 SS. Primary steam supply pressure should be 5-7 bar, feed water should be of proper quality. Guides in the chamber for the rack. Insulation of pipelines with hot and cold water.
Cooling drain. Pressure gauges in the service area at the supply of media. Alarm for lack of media. USB port on the discharge side Printer for printing process data. Power supply: 380 V 3 phases, 50 Hz, neutral, ground Installation supervision, commissioning and individual testing of equipment, instructing operator and technical personnel, a set of documentation of the manufacturer in Russian. Options: Loading rack 1 pc., Additional shelf 2 pcs., Loading trolley 2 pcs., Shelf. For wall mounting the printer 1 pc., Spare parts kit 1 pc.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Length x width x height 1000.0 × 672.0 × 672.0
Weight 1650 kg
Worked hours 0 hours
Hours under power 0 hours
State new
At local norms ---------
Status

About this seller

Client type User – small or medium company
Active since 2019
Offers online 4
Last activity June 18, 2023

Here is a selection of similar machines

Getinge Швеция GE 6610 DRC-2, Р 3203, Miscellaneous pharmaceutical / chemical machine