You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller Verified seller

Client type User – small or medium company
Active since 2020
Offers online 2
Last activity Jan. 15, 2021

Specifications

Type Hydraulic
Nbr of strokes/min 34
Motor power 3 kW
-------------------
Length x width x height 1300.0 × 1100.0 × 1850.0
Weight 950 kg
Worked hours 0 hours
Hours under power 0 hours
State new
At local norms yes
Status packed

Description

One cylinder ironworker with five work stations Exclusive from Geka
Permanent bending station complying with CE standards.

Thanks to the blade holder's vertical movement, machine has an excellent performance in all its five work stations:
punching
notching
shear for flat bars
angle cutting
cutting of round and square bars

Fitted with an anti torque system to reduce deformation when shearing flat bars.

The BENDICROP model is fitted with a touch and cut length stop and is delivered with two V-shaped bending dies of 1 9/16" and 2 3/4".

1.Permanent bending station complying with CE standards.
2.Goose neck die-holder for punching of D and E sections on legs and webs. . Quick tool change
3.Angle shearing withāout loss of material. Wide range of openings for B and A .
4.Flat bar and plate shearing system with minimum deformation F miter shearing up to 45º.
5.Rectangular notching with table Also suitable for tube notching, rectangular notching, etc¿
6.Anti torque system for flat bar shearing without deformation.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines

Contact the seller