Manufacturer Ganner Maschineprotuktion, Austria
automatic drilling of holes in panel parts of furniture, including drilling of sockets for installation of accessories, as well as automatic mounting of accessories.
Rigid stable design
- a work table with PVC rollers, eliminating damage to workpieces when moving;
- rack-and-pinion drive drive for feeding a drilling support, feed speed up to 75 m / min;
-controlled axis Y of the drilling support allows you to process workpieces with a width of 130 mm to 700 mm;
-controlled Z-axis of the drilling support allows drilling to a depth of 35 mm (drill length 70 mm), with the possibility of through-hole drilling;
-controlled X axis of the longitudinal support with rack and pinion drive and linear guides, speed up to 120 m / min for moving and positioning workpieces with lengths from 250 mm to 2300 mm;
-controlled Y axis of the longitudinal support for orienting the workpieces in the transverse direction during loading, processing and unloading;
-control system based on an industrial computer, 15 ”TFT display, WINDOWS XP, quick and easy programming of hole positions and installation of accessories on workpieces;
-graphic display of blanks, error diagnosis;
-the ability to equip a barcode scanner and post-processor for communication with furniture design programs;
The general scope of the machine includes:
making holes, grooves and contours in particleboard, MDF and solid wood
Minimum workpiece size: length X 250 mm, width Y 150 mm, thickness 2 10 mm.
Maximum workpiece size: length X 2300 mm, width U 700 mm, thickness 2.30 mm.
Application of drilling and pressing units for furniture fittings
making holes for hinges in chipboard, MDF and solid wood with the help of a trepanning drill 0 to 40 mm (max.) and two drills for cutting holes 0 to 10 mm (max.).
insertion and mounting of hinges.
making holes for connecting clamps in chipboard, MDF and solid wood with the help of a trepanning drill 0 to 30 mm (max.) and a drill for cutting nests 0 to 10 mm (max.).
The use of the main drilling unit of the machine includes:
making holes in particleboard, MDF and solid wood using a drill from 0 from 3 mm (min.) to 35 mm (max.). Making through holes in chipboard, MDF and solid wood using a drill from 0 from 5 mm (min.) To 30 mm (max.) With a maximum workpiece thickness of 30 mm; drilling is performed from below or optionally with counter-bore.
(Accessories) Grooves in chipboard, MDF and solid wood with a width of 3 to 8 mm and a depth of 0 to 20 mm.
Connection: 17.5 kW
Network: 400 v
Controlled voltage: 24 V
Electricity: 25 A
Cable: 5 * 6 mm2
Year of release - 2009
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase