|Length x width x height||- × - × -|
|Hours under power|
|At local norms||---------|
Jewelry making equipment.
Gold chain making machine:
Plasma Automatic Chain Welding & Making Machine GTZL-170 which is fully controlled by microcomputer.
The main characters of the machine are as follows:
1. Making and welding up to 24K gold, platinum and silver etc. By hi-tech plasma.
2. It is no need for any auxiliary material, for it can complete welding at one time upon the chain purity up to one hundred percent, and also make the chain flat and smooth.
3. Welding and making with high speed, it can make and weld single-curb, cable diameter and double-curb wire of diameter among 0.8-1.8 mm into perfect and smooth chain at one time.
4. As the transmission cams are movable, it can change their position for different styles of chain.
5. Owing to the liquid crystal display system and data, it is convenient for technological operation.
6. It can continue working for over 100 hours only requiring for argon gas, compressed air and 230V power.
7. The omnibearing oil spraying system functions well in prolonging the working period of main parts of the machine.
8. On the basis of the liquid crystal display, chains of different sizes can be welded by current adjusting.
Wire diameter: 0.80mm/1.80mm
Power supply: ~220V / 50Hz
Dimension: L70cm× W72cm× H172cm
Weight : 250KG
Power : 300W
Weaving speed of main engine : 80-300 circles
Power supply: 230V ± 10/50Hz (plus or minus 5 percent)
Welding momentary current : 30 -60A adjustable
Detecting system: The sensor can automatically detect the chain breaking and chain density, as well as the stopping of line working
Protection system: Protection for over-current and under-current
Auxiliary argon gas pressure: 0.5MPa
Working argon gas pressure: 0.2-0.4MPa
Working compressed air pressure: 0.3-0.8MPa
Ambient temperature: -3 to 40 (Degree Centigrade)
Ambient relative humidity : ᐸ 80%
Please note that this description may have been translated automatically. Contact us for further information.