Price on request
Make an offer| Power in tons | 100 T |
| Type | C-Frame |
| Table length | 1000 mm |
| Table width | 900 mm |
| Ram stroke | 600 mm |
| Distance between columns | 1100 mm |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | in working conditions |
| At local norms | --------- |
| status | |
| Last availability date | 20/01/2026 |
This listing features a Galdabini hydraulic press, model 100TN, with a ram force capacity of 100 tons. The press is designed in a C-Frame configuration, providing a clearance distance of 1100 mm between the columns. The working table measures 1000 mm in length and 900 mm in width, suitable for handling medium-sized sheet metal components. The ram stroke is 600 mm, allowing for substantial forming depth.
The press is part of a comprehensive drawing, trimming, and edge banding line intended for manufacturing tank or fire extinguisher bottoms. These parts have an external diameter of approximately 180 mm and a height of about 50 mm, produced from 1.5 mm thick P04 sheet metal starting from a 270 mm wide strip.
Included in the system are several key components: a die suitable for blanking and drawing the initial disc, a coil unwinder, a pneumatic coil feeder, and a roller lubrication unit that ensures proper lubrication of the sheet metal strip during processing. Additionally, there is a pressed part collection chute equipped with a part detector to facilitate automated handling. The line also features a base trimming and edging unit, as well as a set of perimeter protection mesh panels to enhance operator safety.
The hydraulic press is equipped with yellow protective guards and a control panel, as visible in the images. A conveyor belt system is present, carrying metallic curved parts, indicating integration for continuous production. The machine and its surroundings show typical signs of industrial use, including some wear and oil stains, reflecting its operational history. Finished metallic parts, such as domes and cylindrical shapes, are shown clean and polished, ready for subsequent processing or shipment.
Please note that the press was built prior to 1995 and is therefore not CE marked. It is currently located at the Monza, Italy plant and is available for viewing subject to prior arrangement and sale.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Drawing / Trimming / Edge Banding Line
Tank/fire extinguisher bottoms, 180 mm external diameter, approximately 50 mm high, made of 1.5 mm thick P04 sheet metal, starting from a 270 mm wide sheet metal strip.
Consisting of:
Galdabini hydraulic press
100 ton ram force
600 mm stroke
1100 mm clearance between plates
1000 x 900 mm plate dimensions
complete with lower blank holder.
1 Die suitable for blanking the initial disc and drawing
1 Coil unwinder
1 Pneumatic coil feeder
1 Roller lubrication unit for the sheet metal strip
1 Pressed part collection chute with part detector
1 Base trimming/edging unit
1 Set of perimeter protection mesh panels.
Please note that the press was built before 1995 and is therefore not CE marked. In working order, ready for delivery, can be viewed at the Monza, Italy plant, subject to prior sale.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery manufacturer |
| Active since | 2012 |
| Offers online | 12 |
| Last activity | April 16, 2026 |
Drawing / Trimming / Edge Banding Line
Tank/fire extinguisher bottoms, 180 mm external diameter, approximately 50 mm high, made of 1.5 mm thick P04 sheet metal, starting from a 270 mm wide sheet metal strip.
Consisting of:
Galdabini hydraulic press
100 ton ram force
600 mm stroke
1100 mm clearance between plates
1000 x 900 mm plate dimensions
complete with lower blank holder.
1 Die suitable for blanking the initial disc and drawing
1 Coil unwinder
1 Pneumatic coil feeder
1 Roller lubrication unit for the sheet metal strip
1 Pressed part collection chute with part detector
1 Base trimming/edging unit
1 Set of perimeter protection mesh panels.
Please note that the press was built before 1995 and is therefore not CE marked. In working order, ready for delivery, can be viewed at the Monza, Italy plant, subject to prior sale.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 100 T |
| Type | C-Frame |
| Table length | 1000 mm |
| Table width | 900 mm |
| Ram stroke | 600 mm |
| Distance between columns | 1100 mm |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | in working conditions |
| At local norms | --------- |
| status | |
| Last availability date | 20/01/2026 |
This listing features a Galdabini hydraulic press, model 100TN, with a ram force capacity of 100 tons. The press is designed in a C-Frame configuration, providing a clearance distance of 1100 mm between the columns. The working table measures 1000 mm in length and 900 mm in width, suitable for handling medium-sized sheet metal components. The ram stroke is 600 mm, allowing for substantial forming depth.
The press is part of a comprehensive drawing, trimming, and edge banding line intended for manufacturing tank or fire extinguisher bottoms. These parts have an external diameter of approximately 180 mm and a height of about 50 mm, produced from 1.5 mm thick P04 sheet metal starting from a 270 mm wide strip.
Included in the system are several key components: a die suitable for blanking and drawing the initial disc, a coil unwinder, a pneumatic coil feeder, and a roller lubrication unit that ensures proper lubrication of the sheet metal strip during processing. Additionally, there is a pressed part collection chute equipped with a part detector to facilitate automated handling. The line also features a base trimming and edging unit, as well as a set of perimeter protection mesh panels to enhance operator safety.
The hydraulic press is equipped with yellow protective guards and a control panel, as visible in the images. A conveyor belt system is present, carrying metallic curved parts, indicating integration for continuous production. The machine and its surroundings show typical signs of industrial use, including some wear and oil stains, reflecting its operational history. Finished metallic parts, such as domes and cylindrical shapes, are shown clean and polished, ready for subsequent processing or shipment.
Please note that the press was built prior to 1995 and is therefore not CE marked. It is currently located at the Monza, Italy plant and is available for viewing subject to prior arrangement and sale.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery manufacturer |
| Active since | 2012 |
| Offers online | 12 |
| Last activity | April 16, 2026 |
Хидравлична преса Galdabini 100TN
Hydraulický lis Galdabini 100TN
Galdabini 100TN Hydraulisk presse
Galdabini 100TN Hydraulikpresse
Υδραυλική πίεση Galdabini 100TN
Galdabini 100TN Hydraulic press
Prensa hidráulica Galdabini 100TN
Presse hydraulique Galdabini 100TN
Hidraulična preša Galdabini 100TN
Galdabini 100TN Hidraulikus nyomás
Pressa oleodinamica Galdabini 100TN
Hidraulinis presas Galdabini 100TN
Galdabini 100TN Hydraulische pers
Prasa hydrauliczna Galdabini 100TN
Pressão hidráulica Galdabini 100TN
Presa hidraulica Galdabini 100TN
Galdabini 100TN Гидравлический пресс
Hidraulična presa Galdabini 100TN
Galdabini 100TN Hydraulisk press
Hidrolik Pres Galdabini 100TN
EN
- Languages
English (GB)