Price on request
View price| ------------------- | |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Datasheet | Framecad F300i TF550 FL650 |
| Last availability date | 30/05/2026 |
This listing offers a complete set of machinery designed for the production of lightweight steel structures, manufactured by Framecad in 2009, model F300i TF550 FL650. The equipment is available for purchase either individually or as a whole production park.
The F300i Framecad machine specializes in producing C89 x 1.2 profiles, which are lightweight and economical while maintaining structural strength. These profiles are commonly used for internal partition walls, bulkheads in residential buildings, and bathroom modules, suitable for both halls and public facilities as well as office buildings.
The TF550 Framecad machine produces profiles sized C150 x 1.2 and C150 x 1.6. It is highly versatile and widely used in applications ranging from external walls and load-bearing walls of residential buildings to trusses and roof panels. It also supports load-bearing elements that provide fire resistance (REI). The 150mm cavity inside the wall profile allows for effective thermal and acoustic insulation, enhancing energy efficiency and internal space utilization. This profile is especially advantageous in fire-resistant construction and is suitable for social, office, and sanitary spaces within existing buildings, as well as facade walls in reinforced concrete floor-column frame systems.
The FL650 Framecad machine produces C254x2.0 and U260x2.0 profiles, which offer the strength required for floor structures with spans of 8-9 meters between supports and roof spans up to 13 meters in light frame systems. This machine is essential for constructing inter-storey floors and lattice girders in halls.
Additional machines in the production line include the IZ 5, which produces C75x1.2 and C100x1.2 profiles commonly used for bathroom modules and small building partitions, and the Sigma machine.
The machinery is equipped with control panels featuring buttons and screens mounted on vertical stainless steel supports. Multiple rollers are visible on the sheet metal forming machines, which have green and grey panels with ventilation slots. Protective metal grills and blue hydraulic or pneumatic components are also part of the equipment. The machines show signs of wear, including scratches and dirt marks on their surfaces. Some debris, metal sheets, and scraps are present on the floor around the machines. Accessories such as chairs with papers and a green plastic bowl are placed near the equipment. A blue and yellow metal coil uncoiler or feeder machine is also included in the setup.
This comprehensive machinery setup is suitable for manufacturers looking to produce a variety of steel profiles for construction and building applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Complete machinery for the production of lightweight steel structures.
Possibility to buy both a single machine and the whole park.
1. F300i Framecad
Production of C89 x 1.2 profiles. The lightest and most economical production variant at the same time ensuring strength. Applications: partition walls, bulkheads of residential buildings, bathroom modules. It is used both in the systems of internal development of halls and public facilities, as well as in the development of office buildings.
2. TF550 Framecad
Production of profiles C150 x 1.2 and C150 x 1.6. The most universal and most widely used. From external walls and load-bearing walls of residential buildings, through trusses and roof panels, to load-bearing elements of buildings providing REI fire resistance. 150mm of baffle inside the wall allows you to make excellent use of this space for thermal and acoustic insulation of walls, making buildings made using this system will not only be warm and airtight, but also gain m2 of space inside (by using as much as 150mm of insulation inside the wall, we can reduce the layer of insulation on the outside, so that while maintaining the dimensions of the outer contour of the building we have more space to use inside). However, the biggest advantage of using this profile is the issue of fire resistance, wherever there are fire requirements and the condition of bearing capacity of the building structure, that is, any newly created social, office and sanitary spaces inside existing buildings such as halls, warehouses and offices. Quick, simple, fireproof and, last but not least, a system that does not require permanent changes to the facility (such as forging floors), which is quite important for hall tenants. Another big area of use, due to load-bearing capacity, is facade walls. Fillings for the exterior facades of buildings in the reinforced concrete floor-column frame system.
3. FL650 Framecad
Production of profiles C254x2,0 and U260x2,0. The strength of the profiles produced allows us to create floor structures with a span of 8-9m between supports and roofs with a span of up to 13m in the light frame system. Irreplaceable for the construction of inter-storey floors and lattice girders of halls.
4. machine IZ 5
https://www.izanmakina.com/en/products/makineler/iz5/
Production of C75x1.2 and C100x1.2 profiles. The most popular applications: bathroom modules, partitions of small buildings, etc.
5 Sigma machine
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
When was this Framecad F300i TF550 FL650 manufactured?
This Framecad F300i TF550 FL650 light steel construction production line was manufactured in 2009.
Is this production line currently disconnected from power?
This production line is currently disconnected from power.
What is the technical condition of this equipment?
This equipment is assessed to be in good technical condition, allowing for immediate production of profiles without financial investment.
Where was this Framecad F300i TF550 FL650 previously located?
This Framecad F300i TF550 FL650 light steel construction production line is located in a heated hall where production was previously conducted.
What type of production line is this Framecad F300i TF550 FL650?
This Framecad F300i TF550 FL650 is a light steel construction production line.
What year was the unit manufactured?
The unit was manufactured in the year 2009.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | June 17, 2026 |
Complete machinery for the production of lightweight steel structures.
Possibility to buy both a single machine and the whole park.
1. F300i Framecad
Production of C89 x 1.2 profiles. The lightest and most economical production variant at the same time ensuring strength. Applications: partition walls, bulkheads of residential buildings, bathroom modules. It is used both in the systems of internal development of halls and public facilities, as well as in the development of office buildings.
2. TF550 Framecad
Production of profiles C150 x 1.2 and C150 x 1.6. The most universal and most widely used. From external walls and load-bearing walls of residential buildings, through trusses and roof panels, to load-bearing elements of buildings providing REI fire resistance. 150mm of baffle inside the wall allows you to make excellent use of this space for thermal and acoustic insulation of walls, making buildings made using this system will not only be warm and airtight, but also gain m2 of space inside (by using as much as 150mm of insulation inside the wall, we can reduce the layer of insulation on the outside, so that while maintaining the dimensions of the outer contour of the building we have more space to use inside). However, the biggest advantage of using this profile is the issue of fire resistance, wherever there are fire requirements and the condition of bearing capacity of the building structure, that is, any newly created social, office and sanitary spaces inside existing buildings such as halls, warehouses and offices. Quick, simple, fireproof and, last but not least, a system that does not require permanent changes to the facility (such as forging floors), which is quite important for hall tenants. Another big area of use, due to load-bearing capacity, is facade walls. Fillings for the exterior facades of buildings in the reinforced concrete floor-column frame system.
3. FL650 Framecad
Production of profiles C254x2,0 and U260x2,0. The strength of the profiles produced allows us to create floor structures with a span of 8-9m between supports and roofs with a span of up to 13m in the light frame system. Irreplaceable for the construction of inter-storey floors and lattice girders of halls.
4. machine IZ 5
https://www.izanmakina.com/en/products/makineler/iz5/
Production of C75x1.2 and C100x1.2 profiles. The most popular applications: bathroom modules, partitions of small buildings, etc.
5 Sigma machine
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
When was this Framecad F300i TF550 FL650 manufactured?
This Framecad F300i TF550 FL650 light steel construction production line was manufactured in 2009.
Is this production line currently disconnected from power?
This production line is currently disconnected from power.
What is the technical condition of this equipment?
This equipment is assessed to be in good technical condition, allowing for immediate production of profiles without financial investment.
Where was this Framecad F300i TF550 FL650 previously located?
This Framecad F300i TF550 FL650 light steel construction production line is located in a heated hall where production was previously conducted.
What type of production line is this Framecad F300i TF550 FL650?
This Framecad F300i TF550 FL650 is a light steel construction production line.
What year was the unit manufactured?
The unit was manufactured in the year 2009.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| ------------------- | |
| worked hours | |
| hours under power | |
| state | Not specified |
| At local norms | --------- |
| status | |
| Datasheet | Framecad F300i TF550 FL650 |
| Last availability date | 30/05/2026 |
This listing offers a complete set of machinery designed for the production of lightweight steel structures, manufactured by Framecad in 2009, model F300i TF550 FL650. The equipment is available for purchase either individually or as a whole production park.
The F300i Framecad machine specializes in producing C89 x 1.2 profiles, which are lightweight and economical while maintaining structural strength. These profiles are commonly used for internal partition walls, bulkheads in residential buildings, and bathroom modules, suitable for both halls and public facilities as well as office buildings.
The TF550 Framecad machine produces profiles sized C150 x 1.2 and C150 x 1.6. It is highly versatile and widely used in applications ranging from external walls and load-bearing walls of residential buildings to trusses and roof panels. It also supports load-bearing elements that provide fire resistance (REI). The 150mm cavity inside the wall profile allows for effective thermal and acoustic insulation, enhancing energy efficiency and internal space utilization. This profile is especially advantageous in fire-resistant construction and is suitable for social, office, and sanitary spaces within existing buildings, as well as facade walls in reinforced concrete floor-column frame systems.
The FL650 Framecad machine produces C254x2.0 and U260x2.0 profiles, which offer the strength required for floor structures with spans of 8-9 meters between supports and roof spans up to 13 meters in light frame systems. This machine is essential for constructing inter-storey floors and lattice girders in halls.
Additional machines in the production line include the IZ 5, which produces C75x1.2 and C100x1.2 profiles commonly used for bathroom modules and small building partitions, and the Sigma machine.
The machinery is equipped with control panels featuring buttons and screens mounted on vertical stainless steel supports. Multiple rollers are visible on the sheet metal forming machines, which have green and grey panels with ventilation slots. Protective metal grills and blue hydraulic or pneumatic components are also part of the equipment. The machines show signs of wear, including scratches and dirt marks on their surfaces. Some debris, metal sheets, and scraps are present on the floor around the machines. Accessories such as chairs with papers and a green plastic bowl are placed near the equipment. A blue and yellow metal coil uncoiler or feeder machine is also included in the setup.
This comprehensive machinery setup is suitable for manufacturers looking to produce a variety of steel profiles for construction and building applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2025 |
| Offers online | 1 |
| Last activity | June 17, 2026 |
Framecad F300i TF550 FL650 производствена линия за леки стоманени конструкции
Framecad F300i TF550 FL650 výrobní linka na výrobu lehkých ocelových konstrukcí
Framecad F300i TF550 FL650 produktionslinje til let stålkonstruktion
Framecad F300i TF550 FL650 Produktionslinie für den leichten Stahlbau
Framecad F300i TF550 FL650 γραμμή παραγωγής ελαφρών κατασκευών από χάλυβα
Framecad F300i TF550 FL650 light steel construction production line
Framecad F300i TF550 FL650 Línea de producción de acero ligero para la construcción
Framecad F300i TF550 FL650 ligne de production de construction en acier léger
Proizvodna linija za lake čelične konstrukcije Framecad F300i TF550 FL650
Framecad F300i TF550 FL650 könnyűszerkezetes acélszerkezet gyártósor
Linea di produzione di costruzioni in acciaio leggero Framecad F300i TF550 FL650
Framecad F300i TF550 FL650 lengvų plieno konstrukcijų gamybos linija
Framecad F300i TF550 FL650 productielijn voor lichte staalbouw
Linia do produkcji Lekkich konstrukcji stalowych Framecad F300i TF550 FL650
Linha de produção para construção em aço leve Framecad F300i TF550 FL650
Framecad F300i TF550 FL650 linie de producție de construcții din oțel ușor
Линия для производства легких стальных конструкций Framecad F300i TF550 FL650
Proizvodna linija za lake čelične konstrukcije Framecad F300i TF550 FL650
Framecad F300i TF550 FL650 produktionslinje för lätt stålkonstruktion
Framecad F300i TF550 FL650 hafif çelik konstrüksiyon üretim hattı
EN
- Languages
English (GB)