GANTRY
SIEMENS numerical control
MACHINE FEATURES:
Light between uprights mm 3500
Maximum height between table top and spindle nose mm 1850
Worktop dimensions mm 3000x16000 Worktop
capacity kN/m2 50
PORTAL:
Portal stroke (X axis) mm 16000
Portal feed speed (X axis) mm/min 0.5-10000
Portal rapid speed (X axis) mm/min 20000
MILLING HEAD:
Head section mm 480x480
Transverse stroke of the carriage on the crosspiece - Y axis mm 4000
Vertical stroke of the head - Z axis mm 1600
Spindle rotation speed in 2 ranges
-1 rpm range 6-185-750
-2 rpm range 25-750-3000
Spindle motor power (S1) kW 37
Max spindle torque at 185 rpm (1st range) Nm 1900
Y and Z axis feed speed
-1 continuously variable range mm/min 0.5-10000
Speed Z axis rapid speed mm/min 20000
Y axis rapid speed mm/min 40000
COMPLETE WITH: -Working head
automatic locking device -Accessory
automatic locking device
-3-place tool holder disc magazine
-120-place tool holder chain
magazine -HEAD OF VERTICAL MILLING AND DRILLING TV-35:
Type DD210
Distance between spindle and head plate mm 175
Spindle taper DIN 2079-50-AT4-CC
Spindle nose DIN 2979-B50
Shank DIN 69871-B50
Tie rod DIN 69872-B28
Automatic head clamping on the machine
Head clamping force on the machine daN 10000
Automatic tool clamping
Tool clamping force in the head daN 1900
Spindle speed rpm 8-3000
Max power at 175 rpm kW 35
Max torque at 175 rpm Nm 1900
Input/output transmission ratio 1:1
Front flange coolant outlet through the spindle
Spindle cleaning air
Max temperature on the bearings °C 60 -
HORIZONTAL MILLING AND DRILLING HEAD TS-35:
Type DD230
Distance between spindle and front plate mm 200
Spindle taper ISO 50
Spindle nose according to DIN 2079-50 AT4 CC
Automatic tool locking
Shank DIN 6987-B50
Tie rod DIN 69872-B28
Spindle speed rpm 6-3000
Automatic locking of the head on the machine
Max power at 175 rpm kW 35
Max torque at 175 rpm Nm 1900
Transmission ratio input/output 1:1
C2 axis positioning 144x2.5°
C2 axis rotation speed rpm 3
Front flange coolant outlet through the spindle
Cleaning air outlet through the spindle
Max bearing temperature °C 60
-VERTICAL MILLING AND DRILLING HEAD TVL S 400:
Type DD280SS
Distance between spindle and head plate mm 175
Spindle taper DIN 2079-50-AT4-CC
Spindle nose DIN 2979-B50
Shank DIN 69871-B50
Tie rod DIN 69872-B28
Automatic head clamping on the machine
Head clamping force on the machine daN 10000
Automatic tool clamping Tool
clamping force in the head daN 1900
Speed spindle rpm 8-3000
Max power at 175 rpm kW 35
Max torque at 175 rpm Nm 1900
Input/output transmission ratio 1:1
Coolant outlet front flange through the spindle
Spindle cleaning air
Max bearing temperature °C 60

this extra information is standard for this model. Please always double-check the details during a visit

The PIETRO CARNAGHI UNIMILL 35 CA is a state-of-the-art portal milling machine that sets new standards in precision and versatility for metal machining. This high-performance machine is designed to handle a wide range of industrial applications, providing efficient and accurate results.

The UNIMILL 35 CA features a robust portal frame design, ensuring exceptional stability and rigidity during heavy-duty cutting operations. Its large worktable and generous X, Y, Z axis travels allow for the machining of large and complex workpieces with ease.

Equipped with a powerful spindle motor and a variety of cutting tools, the machine delivers high-speed and high-performance milling capabilities. The CNC control system provides advanced programming options, enabling operators to create intricate toolpaths and achieve precise dimensions.

The PIETRO CARNAGHI UNIMILL 35 CA also offers a user-friendly interface, simplifying setup and operation. Its automatic tool changer enables seamless tool transitions, reducing setup times and optimizing productivity.

The milling machine's coolant and chip management systems maintain a clean work environment and extend tool life, contributing to increased efficiency and cost-effectiveness.

In conclusion, the PIETRO CARNAGHI UNIMILL 35 CA portal milling machine stands as an exceptional metal machining solution. Its portal frame design, CNC control, and user-friendly interface make it suitable for various industries, from aerospace to automotive manufacturing. Whether handling single-piece production or high-volume runs, the UNIMILL 35 CA delivers outstanding results with precision and reliability, making it a valuable asset for modern metalworking operations.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

X axis 16000 mm
Y axis 4000 mm
Z axis 1600 mm
CNC Yes
Table length 3000 mm
Table width 16000 mm
Type of CNC SIEMENS
Spindle taper DIN 2079-50-AT4-CC
Max. spindle speed 3000 rpm
Spindle motor power 35 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible
Client type Reseller
Active since 2014
Offers online 33
Last activity March 28, 2024

Description

GANTRY
SIEMENS numerical control
MACHINE FEATURES:
Light between uprights mm 3500
Maximum height between table top and spindle nose mm 1850
Worktop dimensions mm 3000x16000 Worktop
capacity kN/m2 50
PORTAL:
Portal stroke (X axis) mm 16000
Portal feed speed (X axis) mm/min 0.5-10000
Portal rapid speed (X axis) mm/min 20000
MILLING HEAD:
Head section mm 480x480
Transverse stroke of the carriage on the crosspiece - Y axis mm 4000
Vertical stroke of the head - Z axis mm 1600
Spindle rotation speed in 2 ranges
-1 rpm range 6-185-750
-2 rpm range 25-750-3000
Spindle motor power (S1) kW 37
Max spindle torque at 185 rpm (1st range) Nm 1900
Y and Z axis feed speed
-1 continuously variable range mm/min 0.5-10000
Speed Z axis rapid speed mm/min 20000
Y axis rapid speed mm/min 40000
COMPLETE WITH: -Working head
automatic locking device -Accessory
automatic locking device
-3-place tool holder disc magazine
-120-place tool holder chain
magazine -HEAD OF VERTICAL MILLING AND DRILLING TV-35:
Type DD210
Distance between spindle and head plate mm 175
Spindle taper DIN 2079-50-AT4-CC
Spindle nose DIN 2979-B50
Shank DIN 69871-B50
Tie rod DIN 69872-B28
Automatic head clamping on the machine
Head clamping force on the machine daN 10000
Automatic tool clamping
Tool clamping force in the head daN 1900
Spindle speed rpm 8-3000
Max power at 175 rpm kW 35
Max torque at 175 rpm Nm 1900
Input/output transmission ratio 1:1
Front flange coolant outlet through the spindle
Spindle cleaning air
Max temperature on the bearings °C 60 -
HORIZONTAL MILLING AND DRILLING HEAD TS-35:
Type DD230
Distance between spindle and front plate mm 200
Spindle taper ISO 50
Spindle nose according to DIN 2079-50 AT4 CC
Automatic tool locking
Shank DIN 6987-B50
Tie rod DIN 69872-B28
Spindle speed rpm 6-3000
Automatic locking of the head on the machine
Max power at 175 rpm kW 35
Max torque at 175 rpm Nm 1900
Transmission ratio input/output 1:1
C2 axis positioning 144x2.5°
C2 axis rotation speed rpm 3
Front flange coolant outlet through the spindle
Cleaning air outlet through the spindle
Max bearing temperature °C 60
-VERTICAL MILLING AND DRILLING HEAD TVL S 400:
Type DD280SS
Distance between spindle and head plate mm 175
Spindle taper DIN 2079-50-AT4-CC
Spindle nose DIN 2979-B50
Shank DIN 69871-B50
Tie rod DIN 69872-B28
Automatic head clamping on the machine
Head clamping force on the machine daN 10000
Automatic tool clamping Tool
clamping force in the head daN 1900
Speed spindle rpm 8-3000
Max power at 175 rpm kW 35
Max torque at 175 rpm Nm 1900
Input/output transmission ratio 1:1
Coolant outlet front flange through the spindle
Spindle cleaning air
Max bearing temperature °C 60

this extra information is standard for this model. Please always double-check the details during a visit

The PIETRO CARNAGHI UNIMILL 35 CA is a state-of-the-art portal milling machine that sets new standards in precision and versatility for metal machining. This high-performance machine is designed to handle a wide range of industrial applications, providing efficient and accurate results.

The UNIMILL 35 CA features a robust portal frame design, ensuring exceptional stability and rigidity during heavy-duty cutting operations. Its large worktable and generous X, Y, Z axis travels allow for the machining of large and complex workpieces with ease.

Equipped with a powerful spindle motor and a variety of cutting tools, the machine delivers high-speed and high-performance milling capabilities. The CNC control system provides advanced programming options, enabling operators to create intricate toolpaths and achieve precise dimensions.

The PIETRO CARNAGHI UNIMILL 35 CA also offers a user-friendly interface, simplifying setup and operation. Its automatic tool changer enables seamless tool transitions, reducing setup times and optimizing productivity.

The milling machine's coolant and chip management systems maintain a clean work environment and extend tool life, contributing to increased efficiency and cost-effectiveness.

In conclusion, the PIETRO CARNAGHI UNIMILL 35 CA portal milling machine stands as an exceptional metal machining solution. Its portal frame design, CNC control, and user-friendly interface make it suitable for various industries, from aerospace to automotive manufacturing. Whether handling single-piece production or high-volume runs, the UNIMILL 35 CA delivers outstanding results with precision and reliability, making it a valuable asset for modern metalworking operations.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

X axis 16000 mm
Y axis 4000 mm
Z axis 1600 mm
CNC Yes
Table length 3000 mm
Table width 16000 mm
Type of CNC SIEMENS
Spindle taper DIN 2079-50-AT4-CC
Max. spindle speed 3000 rpm
Spindle motor power 35 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2014
Offers online 33
Last activity March 28, 2024

Here is a selection of similar machines

PIETRO CARNAGHI UNIMILL 35 CA Portal milling machine