Price on request
Make an offer| Type | H-Frame |
| Power in tons | 160 T |
| Table length | 2500 mm |
| Table width | 400 mm |
| Ram stroke | 190 mm |
| Distance between columns | 2000 mm |
| Engine Power | 18.5 kW |
| ------------------- | |
| Length x width x height | 3200.0 × 2400.0 × 2600.0 |
| Weight | 10000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 17/04/2026 |
This listing is for a Fischer HAKS 16/2500 hydraulic press brake, manufactured in 1980 in Germany. The machine is designed as an H-Frame type press with a maximum pressure capacity of 160 tons. It features a robust press bed measuring 2500 mm in length and 400 mm in width, providing a substantial working surface area. The ram stroke is 190 mm, and the distance between the two columns is 2000 mm, allowing for ample workspace and material handling.
The machine's total dimensions are approximately 3200 mm in length, 2400 mm in width, and 2600 mm in height, with a weight of around 10,000 kg. It is powered by an 18.5 kW engine, requiring a total power capacity of 22 kW. The hydraulic system holds an oil volume of about 500 liters. The table height over the floor is 850 mm, and the ram surface matches the table dimensions at 2500 x 400 mm. The machine includes six T-slots, each 18 mm wide, supporting various tooling configurations.
The press brake was modernized in 1993 to comply with German safety regulations. Visual inspection shows the machine painted green with yellow safety guards on both sides, enhancing operator safety. The press bed and upper ram are supported by multiple brackets, indicating a sturdy construction. A metal table or stand is attached in front of the press for material support. The control panel is located on the right side and includes buttons and an emergency stop button, with an additional emergency stop button visible on the lower left side. Cables and a foot pedal are present, suggesting the machine is set up for operation.
The machine shows signs of use, with some dirt and wear visible on the base and press bed, consistent with typical industrial usage. Several warning and information labels are affixed to the machine body. Included with the press are metal components or parts wrapped on a pallet, which appear to be accessories or replacement parts. This comprehensive setup is suitable for heavy-duty bending and forming tasks in an industrial environment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Hydraulic pressbrake
Fischer HAKS 16/2500
Built in 1980,
Machine was modernized conform to German safety regulations in 1993.
pressure
160 t
chamfer lenght
2500 mm
distance between columns
2000 mm
column arm
315 mm
stroke
190 mm
table surface area
2500 x 400 mm
return speed
100 mm/sec
feed up
100 mm/sec
feed down
50 mm/sec
working feed
6 mm/sec
table height over floor
850 mm
ram surface
2500 x 400 mm
flute distance
500
T-slots
6 x 18mm
power capacity
18,5 kW
oil volume
500 l
total power requirement
22 kW
weight of the machine ca.
10 t
dimensions of the machine ca.
3,20 x 2,40 x 2,60 m
Country of origin Germany
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2006 |
| Offers online | 22 |
| Last activity | April 11, 2026 |
Hydraulic pressbrake
Fischer HAKS 16/2500
Built in 1980,
Machine was modernized conform to German safety regulations in 1993.
pressure
160 t
chamfer lenght
2500 mm
distance between columns
2000 mm
column arm
315 mm
stroke
190 mm
table surface area
2500 x 400 mm
return speed
100 mm/sec
feed up
100 mm/sec
feed down
50 mm/sec
working feed
6 mm/sec
table height over floor
850 mm
ram surface
2500 x 400 mm
flute distance
500
T-slots
6 x 18mm
power capacity
18,5 kW
oil volume
500 l
total power requirement
22 kW
weight of the machine ca.
10 t
dimensions of the machine ca.
3,20 x 2,40 x 2,60 m
Country of origin Germany
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Type | H-Frame |
| Power in tons | 160 T |
| Table length | 2500 mm |
| Table width | 400 mm |
| Ram stroke | 190 mm |
| Distance between columns | 2000 mm |
| Engine Power | 18.5 kW |
| ------------------- | |
| Length x width x height | 3200.0 × 2400.0 × 2600.0 |
| Weight | 10000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 17/04/2026 |
This listing is for a Fischer HAKS 16/2500 hydraulic press brake, manufactured in 1980 in Germany. The machine is designed as an H-Frame type press with a maximum pressure capacity of 160 tons. It features a robust press bed measuring 2500 mm in length and 400 mm in width, providing a substantial working surface area. The ram stroke is 190 mm, and the distance between the two columns is 2000 mm, allowing for ample workspace and material handling.
The machine's total dimensions are approximately 3200 mm in length, 2400 mm in width, and 2600 mm in height, with a weight of around 10,000 kg. It is powered by an 18.5 kW engine, requiring a total power capacity of 22 kW. The hydraulic system holds an oil volume of about 500 liters. The table height over the floor is 850 mm, and the ram surface matches the table dimensions at 2500 x 400 mm. The machine includes six T-slots, each 18 mm wide, supporting various tooling configurations.
The press brake was modernized in 1993 to comply with German safety regulations. Visual inspection shows the machine painted green with yellow safety guards on both sides, enhancing operator safety. The press bed and upper ram are supported by multiple brackets, indicating a sturdy construction. A metal table or stand is attached in front of the press for material support. The control panel is located on the right side and includes buttons and an emergency stop button, with an additional emergency stop button visible on the lower left side. Cables and a foot pedal are present, suggesting the machine is set up for operation.
The machine shows signs of use, with some dirt and wear visible on the base and press bed, consistent with typical industrial usage. Several warning and information labels are affixed to the machine body. Included with the press are metal components or parts wrapped on a pallet, which appear to be accessories or replacement parts. This comprehensive setup is suitable for heavy-duty bending and forming tasks in an industrial environment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2006 |
| Offers online | 22 |
| Last activity | April 11, 2026 |
Хидравлична преса Fischer HAKS 16/2500
Hydraulický lis Fischer HAKS 16/2500
Hydraulisk presse Fischer HAKS 16/2500
Fischer HAKS 16/2500 Hydraulikpresse
Υδραυλική πίεση Fischer HAKS 16/2500
Fischer HAKS 16/2500 Hydraulic press
Prensa hidráulica Fischer HAKS 16/2500
Presse hydraulique Fischer HAKS 16/2500
Hidraulična preša Fischer HAKS 16/2500
Fischer HAKS 16/2500 Hidraulikus nyomás
Pressa idraulica Fischer HAKS 16/2500
Hidraulinis presas Fischer HAKS 16/2500
Fischer HAKS 16/2500 Hydraulische pers
Prasa hydrauliczna Fischer HAKS 16/2500
Pressão hidráulica Fischer HAKS 16/2500
Presa hidraulica Fischer HAKS 16/2500
Fischer HAKS 16/2500 Гидравлический пресс
Hidraulična presa Fischer HAKS 16/2500
Fischer HAKS 16/2500 Hydraulisk press
Hidrolik Pres Fischer HAKS 16/2500
EN
- Languages
English (GB)