80,500 €
Make an offer| Power in tons | 160 T |
| Type | H-Frame |
| Nbr of strokes/min | 72 |
| Engine Power | 7.5 kW |
| ------------------- | |
| Weight | 9000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 07/04/2026 |
The Feintool GKP F 100T is a hydraulic H-frame press manufactured in 1974, designed for precise and efficient die-cutting operations. This robust machine delivers a total force of 160 tons, making it suitable for demanding processing stages that can be combined into a single, accurate process. It is capable of cutting details with a maximum thickness of 6 mm, achieving a smooth surface and precisely defined edges.
Featuring a solid and stable construction, the press measures 1780 mm in length and 2800 mm in width, and weighs approximately 9,000 kg. The machine is powered by a 7.5 kW engine and can perform up to 72 strokes per minute, with stepless regulation allowing for stroke speed adjustment between 18 and 72 strokes per minute.
Additional technical features include hydraulic forces applied to the upper and lower tables, ejection force controlled by pump pressure, and a hydraulic lock for the upper table. The machine also supports automation through optional equipment such as a sheet feeder.
Visible components include a large vertical press section and a roller feeder unit attached to the left side, along with hydraulic cylinders and piping on the machine’s side. The front of the machine is equipped with a control panel featuring multiple buttons and switches for operational control. The machine's exterior shows signs of wear and paint chipping, indicating it has been used.
This Feintool hydraulic press operates on a 380 V, 50 Hz power supply and requires compressed air at 6-8 bar pressure. It includes features such as a channel for receiving finished parts, a device for lubricating the fed tape, and a blowing device to assist in the processing workflow. Overall, the GKP F 100T is a heavy-duty, versatile die-cutting press suitable for industrial applications requiring precision and reliability.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The FEINTOOL GKP F 100T hydraulic press, built in 1974 in Switzerland, allows you to combine several demanding processing stages into one precise process, saving time and work. As a result of precise cutting, details with a maximum thickness of 6 mm achieve an extremely even surface and precisely outlined edges, which cannot be obtained when using other machines. The FEINTOOL GKP F 100/160 hydraulic punching press is characterized by a solid, stable construction and a total force of 160 tons. In order to automate the entire processing process, the machine can be equipped with a sheet feeder. The FEINTOOL GKP-F 100 die-cutting press weighs approximately 9 tons.
Technical specifications of the FEINTOOL GKP F 100T die-cutting press
- total force with auxiliary functions: 160 t
- cutting force: 100 t
- hydraulic force of the counterweight (upper table): 1-40 t
- hydraulic force of the ring jaw (lower table): 12-50 t
- ejection force (pump pressure): 4-8 t
- maximum detail thickness: 6 mm
- maximum width of the fed tape: 210 mm
- maximum number of slider strokes: 72/min
- minimum number of slider strokes: 18/min
- stepless regulation of the number of strokes
- channel for receiving finished parts
- a device that lubricates the fed tape
- blowing device
- hydraulic lock of the upper table
- engine power: 7.5 kW
- pump motor power (pneumatic scissors): 4 kW
- pump motor power (hydraulic shears): 5.5 kW
- compressed air pressure: 6-8 bar
- power supply: 380 V; 50 Hz
- dimensions (width x height): 1780 x 2800 mm
- machine weight: approx. 9 tons
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 398 |
| Last activity | April 20, 2026 |
The FEINTOOL GKP F 100T hydraulic press, built in 1974 in Switzerland, allows you to combine several demanding processing stages into one precise process, saving time and work. As a result of precise cutting, details with a maximum thickness of 6 mm achieve an extremely even surface and precisely outlined edges, which cannot be obtained when using other machines. The FEINTOOL GKP F 100/160 hydraulic punching press is characterized by a solid, stable construction and a total force of 160 tons. In order to automate the entire processing process, the machine can be equipped with a sheet feeder. The FEINTOOL GKP-F 100 die-cutting press weighs approximately 9 tons.
Technical specifications of the FEINTOOL GKP F 100T die-cutting press
- total force with auxiliary functions: 160 t
- cutting force: 100 t
- hydraulic force of the counterweight (upper table): 1-40 t
- hydraulic force of the ring jaw (lower table): 12-50 t
- ejection force (pump pressure): 4-8 t
- maximum detail thickness: 6 mm
- maximum width of the fed tape: 210 mm
- maximum number of slider strokes: 72/min
- minimum number of slider strokes: 18/min
- stepless regulation of the number of strokes
- channel for receiving finished parts
- a device that lubricates the fed tape
- blowing device
- hydraulic lock of the upper table
- engine power: 7.5 kW
- pump motor power (pneumatic scissors): 4 kW
- pump motor power (hydraulic shears): 5.5 kW
- compressed air pressure: 6-8 bar
- power supply: 380 V; 50 Hz
- dimensions (width x height): 1780 x 2800 mm
- machine weight: approx. 9 tons
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 160 T |
| Type | H-Frame |
| Nbr of strokes/min | 72 |
| Engine Power | 7.5 kW |
| ------------------- | |
| Weight | 9000 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 07/04/2026 |
The Feintool GKP F 100T is a hydraulic H-frame press manufactured in 1974, designed for precise and efficient die-cutting operations. This robust machine delivers a total force of 160 tons, making it suitable for demanding processing stages that can be combined into a single, accurate process. It is capable of cutting details with a maximum thickness of 6 mm, achieving a smooth surface and precisely defined edges.
Featuring a solid and stable construction, the press measures 1780 mm in length and 2800 mm in width, and weighs approximately 9,000 kg. The machine is powered by a 7.5 kW engine and can perform up to 72 strokes per minute, with stepless regulation allowing for stroke speed adjustment between 18 and 72 strokes per minute.
Additional technical features include hydraulic forces applied to the upper and lower tables, ejection force controlled by pump pressure, and a hydraulic lock for the upper table. The machine also supports automation through optional equipment such as a sheet feeder.
Visible components include a large vertical press section and a roller feeder unit attached to the left side, along with hydraulic cylinders and piping on the machine’s side. The front of the machine is equipped with a control panel featuring multiple buttons and switches for operational control. The machine's exterior shows signs of wear and paint chipping, indicating it has been used.
This Feintool hydraulic press operates on a 380 V, 50 Hz power supply and requires compressed air at 6-8 bar pressure. It includes features such as a channel for receiving finished parts, a device for lubricating the fed tape, and a blowing device to assist in the processing workflow. Overall, the GKP F 100T is a heavy-duty, versatile die-cutting press suitable for industrial applications requiring precision and reliability.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 398 |
| Last activity | April 20, 2026 |
Хидравлична преса Feintool GKP F 100T
Hydraulický lis Feintool GKP F 100T
Hydraulisk presse Feintool GKP F 100T
Feintool GKP F 100T Hydraulikpresse
Υδραυλική πίεση Feintool GKP F 100T
Feintool GKP F 100T Hydraulic press
Prensa hidráulica Feintool GKP F 100T
Presse hydraulique Feintool GKP F 100T
Hidraulična preša Feintool GKP F 100T
Feintool GKP F 100T Hidraulikus nyomás
Pressa idraulica Feintool GKP F 100T
Hidraulinis presas Feintool GKP F 100T
Feintool GKP F 100T Hydraulische pers
Prasa hydrauliczna Feintool GKP F 100T
Pressão hidráulica Feintool GKP F 100T
Presa hidraulica Feintool GKP F 100T
Feintool GKP F 100T Гидравлический пресс
Hidraulična presa Feintool GKP F 100T
Feintool GKP F 100T Hydraulisk press
Hidrolik Pres Feintool GKP F 100T
EN
- Languages
English (GB)