Lathe after renovation CNC FAT TUR 630 MN x 2000 year 2011 Siemens 840

Control Siemens 840 Shop TURN

Turning diameter over bed 660mm

Turning diameter over slide 400mm

Turntable length 2000mm

Spindle bore 105mm

18.5KW motor, torque 2100Nm

Tailstock sleeve 100mm, cone MK 5, quill extension 200mm

Width of the bed 433mm both guides PRODUCED

The weight of the machine is about 5700 kg

Technical parameters:

Passage over the bed mm 660
Swing over the slide mm 400
max. weight between centers (without supports) kg 2000
max. weight in the holder kg 600

SEPTEMBER
Number of speed ranges 2
Top speed
in each range RPM I 2- 430, II 200- 2500
Spindle end DIN 55029 Camlock D 1-8
115mm spindle socket
Spindle bore 105mm
Main drive motor power 18.5 kW
max. torque Nm 2100
Front bearing 210 mm

SADDLE
max. X-axis travel mm 350
Feed rate range
trans/long mm/min 5 - 3200
Rapid traverse Z-axis m/min 8
X-axis rapid traverse m/min 8
Traverse feed force N 10,000
Longitudinal feed force N 15,000
Z-axis ball screw mm 40
X-axis ball screw mm 32
Width of the longitudinal carriage mm 610
Width of transverse guides mm 230
WTO Capto C4/C5 head

LIQUID
Tailstock sleeve mm 100
Tailstock taper MT 5
Tailstock sleeve extension mm 200

OVERALL DIMENSIONS
Bed width mm 433
Machine length 4,700
Machine width mm 2,300
Machine height mm 1,760
The net weight of the machine is 6,700 kg

MACHINE EQUIPMENT.
 Siemens electrical components and Siemens 840D Shop Turn control - voltage 3x400V
 Siemens AC brushless feed drives absolute motors need no reference
 WTO CAPTO C4/C5 tool turret
 Cooling system with 6 Bar coolant pump
 Rear chip guard
 Front cover, extendable (2x)
 Operation and Maintenance Manual, programming and operating instructions, copy of machine data
 Chuck Ø 315 / D1-8 SCHUNK passage 103 quick change jaws
 Steady, roller, manual, ø10 – 180
Steady, roller, manual ø140 - 300
CHIP TRANSPORTER

The lathe is ready for collection, tests, connected to electricity

The bed on the first meter from the handle is worn about 0.004-0.005 mm.

His score on a scale of 0-10 is a 7.

But most importantly, the accuracy of turning on the shaft without support (tailstock): on the length of 300mm, the accuracy of 0.02mm with the correct leveling of the bed. That is, the accuracy of turning as with a new machine in accordance with DIN.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Turning length 2000 mm
Turning Ø 660 mm
Ø above the bed 660 mm
Ø above transversing slide 400 mm
Length between centers 3000 mm
Type of CNC Siemens 840 Shop Trurn
X-axis 365 mm
Z-axis 2500 mm
Max workpiece weight 3000 kg
Spindle taper d1-8 camlock
Spindle bore 105 mm
Number of tools on turret 1
Turning speed 2500 rpm
Spindle motor power 18.5 kW
Tailstock yes
Bar feeder no
-------------------
Length x width x height 3700.0 × 2200.0 × 1850.0
Weight 5700 kg
Worked hours
Hours under power
State revised
At local norms yes
Status under power
Datasheet FAT TUR 560MN
Client type Reseller
Active since 2022
Offers online 2
Last activity Jan. 2, 2024

Description

Lathe after renovation CNC FAT TUR 630 MN x 2000 year 2011 Siemens 840

Control Siemens 840 Shop TURN

Turning diameter over bed 660mm

Turning diameter over slide 400mm

Turntable length 2000mm

Spindle bore 105mm

18.5KW motor, torque 2100Nm

Tailstock sleeve 100mm, cone MK 5, quill extension 200mm

Width of the bed 433mm both guides PRODUCED

The weight of the machine is about 5700 kg

Technical parameters:

Passage over the bed mm 660
Swing over the slide mm 400
max. weight between centers (without supports) kg 2000
max. weight in the holder kg 600

SEPTEMBER
Number of speed ranges 2
Top speed
in each range RPM I 2- 430, II 200- 2500
Spindle end DIN 55029 Camlock D 1-8
115mm spindle socket
Spindle bore 105mm
Main drive motor power 18.5 kW
max. torque Nm 2100
Front bearing 210 mm

SADDLE
max. X-axis travel mm 350
Feed rate range
trans/long mm/min 5 - 3200
Rapid traverse Z-axis m/min 8
X-axis rapid traverse m/min 8
Traverse feed force N 10,000
Longitudinal feed force N 15,000
Z-axis ball screw mm 40
X-axis ball screw mm 32
Width of the longitudinal carriage mm 610
Width of transverse guides mm 230
WTO Capto C4/C5 head

LIQUID
Tailstock sleeve mm 100
Tailstock taper MT 5
Tailstock sleeve extension mm 200

OVERALL DIMENSIONS
Bed width mm 433
Machine length 4,700
Machine width mm 2,300
Machine height mm 1,760
The net weight of the machine is 6,700 kg

MACHINE EQUIPMENT.
 Siemens electrical components and Siemens 840D Shop Turn control - voltage 3x400V
 Siemens AC brushless feed drives absolute motors need no reference
 WTO CAPTO C4/C5 tool turret
 Cooling system with 6 Bar coolant pump
 Rear chip guard
 Front cover, extendable (2x)
 Operation and Maintenance Manual, programming and operating instructions, copy of machine data
 Chuck Ø 315 / D1-8 SCHUNK passage 103 quick change jaws
 Steady, roller, manual, ø10 – 180
Steady, roller, manual ø140 - 300
CHIP TRANSPORTER

The lathe is ready for collection, tests, connected to electricity

The bed on the first meter from the handle is worn about 0.004-0.005 mm.

His score on a scale of 0-10 is a 7.

But most importantly, the accuracy of turning on the shaft without support (tailstock): on the length of 300mm, the accuracy of 0.02mm with the correct leveling of the bed. That is, the accuracy of turning as with a new machine in accordance with DIN.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Turning length 2000 mm
Turning Ø 660 mm
Ø above the bed 660 mm
Ø above transversing slide 400 mm
Length between centers 3000 mm
Type of CNC Siemens 840 Shop Trurn
X-axis 365 mm
Z-axis 2500 mm
Max workpiece weight 3000 kg
Spindle taper d1-8 camlock
Spindle bore 105 mm
Number of tools on turret 1
Turning speed 2500 rpm
Spindle motor power 18.5 kW
Tailstock yes
Bar feeder no
-------------------
Length x width x height 3700.0 × 2200.0 × 1850.0
Weight 5700 kg
Worked hours
Hours under power
State revised
At local norms yes
Status under power

About this seller

Client type Reseller
Active since 2022
Offers online 2
Last activity Jan. 2, 2024

Here is a selection of similar machines

Fat Tur 560Mn cnc lathe