Fanuc Robodrill T14iA Vertical Machining Centre for sale. 1998 model with 8,000 rpm spindle and 14 tool ATC.

Traverses
X Axis 500mm
Y Axis 380mm
Z Axis 300mm
Spindle Nose to Worktable
Minimum 250mm
Maximum 550mm
Work Table
Table working surface 650 x 400mm
Table loading capacity (uniform load) 200kg
Table surface configuration
Number of T slots 3
Width 14mm
Pitch 125mm
Machine Dimensions
Width 1550mm
Depth 1900mm
Height min/max 2067/2367mm
Weight (approximately) 2000kg
Spindle
Speed range 100 – 8,000rpm
Taper BT 30
Feedrates
Rapid traverse rate 48m/min
Feedrate 1 – 30000mm/min
Toolchanger
Type of tooling MAS BT 30
Tool storage capacity 14 Tools
Tool diameter 80mm
Tool length 200mm
Tool weight 2kg (total 15kg)
Tool change time – tool to tool 0.9 secs (2kg)
CNC Control System Fanuc Series 16iM
Electrical Supply 415V, 3 ph , 50Hz
Compressed Air Supply 5kgf/cm2 (100 litres/min)

Machine equipped with
Coolant system
Lighting
Guarding

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Axis X 500 mm
Axis Y 380 mm
Axis Z 300 mm
Rotary table (4th axis) no
Type of CNC Fanuc Series 16iM
Table length 650 mm
Table width 400 mm
Max. part weight 200 kg
Number of tool pockets 3
Spindle taper MAS BT 30
Max. spindle speed 8000 rpm
Spindle motor power 5.5 kW
-------------------
Length x width x height 1550.0 × 1900.0 × 2367.0
Weight 2000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Fanuc Robodrill T14iA
Client type Reseller
Active since 2009
Offers online 35
Last activity Feb. 15, 2024

Description

Fanuc Robodrill T14iA Vertical Machining Centre for sale. 1998 model with 8,000 rpm spindle and 14 tool ATC.

Traverses
X Axis 500mm
Y Axis 380mm
Z Axis 300mm
Spindle Nose to Worktable
Minimum 250mm
Maximum 550mm
Work Table
Table working surface 650 x 400mm
Table loading capacity (uniform load) 200kg
Table surface configuration
Number of T slots 3
Width 14mm
Pitch 125mm
Machine Dimensions
Width 1550mm
Depth 1900mm
Height min/max 2067/2367mm
Weight (approximately) 2000kg
Spindle
Speed range 100 – 8,000rpm
Taper BT 30
Feedrates
Rapid traverse rate 48m/min
Feedrate 1 – 30000mm/min
Toolchanger
Type of tooling MAS BT 30
Tool storage capacity 14 Tools
Tool diameter 80mm
Tool length 200mm
Tool weight 2kg (total 15kg)
Tool change time – tool to tool 0.9 secs (2kg)
CNC Control System Fanuc Series 16iM
Electrical Supply 415V, 3 ph , 50Hz
Compressed Air Supply 5kgf/cm2 (100 litres/min)

Machine equipped with
Coolant system
Lighting
Guarding

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Axis X 500 mm
Axis Y 380 mm
Axis Z 300 mm
Rotary table (4th axis) no
Type of CNC Fanuc Series 16iM
Table length 650 mm
Table width 400 mm
Max. part weight 200 kg
Number of tool pockets 3
Spindle taper MAS BT 30
Max. spindle speed 8000 rpm
Spindle motor power 5.5 kW
-------------------
Length x width x height 1550.0 × 1900.0 × 2367.0
Weight 2000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2009
Offers online 35
Last activity Feb. 15, 2024

Here is a selection of similar machines

Fanuc Robodrill T14iA Machining center - vertical