Long reach Fanuc MIG welding Robot with automated twin pallet conveyor and automatic weld tip cleaner.

Welds items up to 1500mm long!

Super fast 2m/second movement

Comes with full barrell of wire

Will make you bucket loads of money if you gave the volume to let it weld. Sadly we don't have the numbers of repeat products to justify it anymore

Full warm up routine shown below. Wire being put into a 2mm hole to verify position al accuracy before welding



CONVEYORS

Conveyor system comprising two single-tier shuttle conveyors, in Reseda Green:-

2 Work Station modules each complete with.
Pneumatic shot-bolt pallet location
8 bit pallet identification system
Pallet raise security clamps, 4 to each workstation
2 transport sections
2 reload sections each complete with.
Emergency stop pushbuttons
Loader ready push-buttons
Externally mounted robot re-start pushbutton / fault indicator
Loading height of 760 mm
Upgraded pallet payload of 250kg
2 work-presentation pallets (nominal size: 1500 x 750 mm)
Double drive band system


ROBOT

Fanuc long reach 6 axis articulated-arm robot.

ArcMate 120i arm
RJ2 “A” sized controller.
Standard memory.
ArcTool welding software.
Robot to weldset analogue interface card
Binzel Cat one anti-collision mount
Integrated robot stand.


WELDING SET

Kemppi inverter-controlled, welding set, comprising:

Kemppi Pro 3000 power source
520R wire feeder:
ML pulsed welding function panel
120R sub-wire feeder robot mounted
ProCool 10 recirculating water cooler
Fanuc – Kemppi welding interface unit
Earth cable and all interconnections.


TORCH ASSEMBLY

Binzel water cooled torch

A500 22 degree separable neck
ABirob A-ECO 1.1m harness


TORCH CLEANER

Thielmann BRG automatic torch cleaning unit featuring nozzle clamp, reamer, anti-spatter dip, drip tray and integrated stand.

GUARDING

Welding screens to form an enclosure around robot workstation, in Reseda Green including:

Single access door, complete with

Mistura double key safety interlock mechanism
Robot hold switch
Pacton safety observation panel
External Mistura key switch
Internal Mistura key switch
Additional Pacton safety observation panels

EXTRACTION

Galvanised full sized canopy with twin double florescent light units and single extraction spigot

CE MARK

Complete system will carry the relevant CE certification

Contact for more details

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Control type
-------------------
Worked hours
Hours under power
State general-product-state-empty
At local norms ---------
Status
Client type User – small or medium company
Active since 2023
Offers online 1
Last activity June 17, 2023

Description

Long reach Fanuc MIG welding Robot with automated twin pallet conveyor and automatic weld tip cleaner.

Welds items up to 1500mm long!

Super fast 2m/second movement

Comes with full barrell of wire

Will make you bucket loads of money if you gave the volume to let it weld. Sadly we don't have the numbers of repeat products to justify it anymore

Full warm up routine shown below. Wire being put into a 2mm hole to verify position al accuracy before welding



CONVEYORS

Conveyor system comprising two single-tier shuttle conveyors, in Reseda Green:-

2 Work Station modules each complete with.
Pneumatic shot-bolt pallet location
8 bit pallet identification system
Pallet raise security clamps, 4 to each workstation
2 transport sections
2 reload sections each complete with.
Emergency stop pushbuttons
Loader ready push-buttons
Externally mounted robot re-start pushbutton / fault indicator
Loading height of 760 mm
Upgraded pallet payload of 250kg
2 work-presentation pallets (nominal size: 1500 x 750 mm)
Double drive band system


ROBOT

Fanuc long reach 6 axis articulated-arm robot.

ArcMate 120i arm
RJ2 “A” sized controller.
Standard memory.
ArcTool welding software.
Robot to weldset analogue interface card
Binzel Cat one anti-collision mount
Integrated robot stand.


WELDING SET

Kemppi inverter-controlled, welding set, comprising:

Kemppi Pro 3000 power source
520R wire feeder:
ML pulsed welding function panel
120R sub-wire feeder robot mounted
ProCool 10 recirculating water cooler
Fanuc – Kemppi welding interface unit
Earth cable and all interconnections.


TORCH ASSEMBLY

Binzel water cooled torch

A500 22 degree separable neck
ABirob A-ECO 1.1m harness


TORCH CLEANER

Thielmann BRG automatic torch cleaning unit featuring nozzle clamp, reamer, anti-spatter dip, drip tray and integrated stand.

GUARDING

Welding screens to form an enclosure around robot workstation, in Reseda Green including:

Single access door, complete with

Mistura double key safety interlock mechanism
Robot hold switch
Pacton safety observation panel
External Mistura key switch
Internal Mistura key switch
Additional Pacton safety observation panels

EXTRACTION

Galvanised full sized canopy with twin double florescent light units and single extraction spigot

CE MARK

Complete system will carry the relevant CE certification

Contact for more details

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Control type
-------------------
Worked hours
Hours under power
State general-product-state-empty
At local norms ---------
Status

About this seller

Client type User – small or medium company
Active since 2023
Offers online 1
Last activity June 17, 2023

Here is a selection of similar machines

Fanuc Mig Welding Robot Cell