| Manufacturer | Ersa |
|---|---|
| Model | versaflow 40/50 |
| Year | |
| Location | Netherlands
|
The Ersa Versaflow 40/50 is a selective soldering machine designed for precise and efficient PCB assembly. It features a robust build with base dimensions of 258 cm in length, extending to 358 cm including the conveyor, a width of 152.5 cm, and a height of 180 cm. The machine weighs approximately 1,100 kg without solder.
Conveyor and PCB handling are managed via a pin and chain system, with an optional roller conveyor. The conveyor operates at a fixed 0° angle and can reach speeds up to approximately 10 meters per minute, providing a positioning accuracy of ±0.25 mm. It supports PCB or pallet weights up to 5 kg.
The machine accommodates PCBs ranging in width from 50 to 400 mm, extendable up to 500 mm as an option, and lengths from 120 to 500 mm, with an optional extension up to 600 mm. Maximum component clearance is 100 mm on top and 30 mm underneath.
Flux application is performed by a selective spray fluxer using a precision drop-jet system on two servo-driven axes (X/Y). The flux tank holds 2 liters, and the spray width ranges from approximately 3 to 6 mm through a 130 µm nozzle, maintaining a positioning accuracy of ±0.25 mm.
Preheating is achieved with a bottom-side infrared system delivering up to 10.2 kW of connected power. The solder module employs a selective mini-wave soldering technique with three servo-driven axes (X/Y/Z). It uses nozzles with a diameter of at least 4.5 mm, creating a solder wave up to 5 mm high. The solder bath has a capacity of about 10 kg and can reach a maximum temperature of 330°C, with a warm-up time around 1.5 hours. Positioning accuracy in this module is also ±0.25 mm.
Utility requirements include nitrogen consumption at roughly 2 cubic meters per hour with a pressure of about 3 bar, and compressed air at approximately 6 bar with a flow less than 5 cubic meters per hour.
Electrically, the machine requires a 3-phase 230/400 V supply with neutral and protective earth, operating at 50 or 60 Hz. Maximum power consumption is 26 kW, with a current draw up to 39 A, protected by three slow-blow fuses rated at 50 A each.
This comprehensive set of features makes the Ersa Versaflow 40/50 suitable for selective soldering tasks requiring precision and flexibility in PCB handling and component clearance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Machine dimensions
Length (base): 258 cm
Length (with conveyor): 358 cm
Width: 152.5 cm
Height: 180 cm
Weight: ~1,100 kg (without solder)
🔄 Conveyor & PCB handling
Conveyor type: Pin & chain (roller optional)
Conveyor angle: 0° (fixed)
Conveyor speed: up to ~10 m/min
Positioning accuracy: ±0.25 mm
Max PCB/pallet weight: 5 kg
PCB size range
Width: 50 – 400 mm (option up to 500 mm)
Length: 120 – 500 mm (option up to 600 mm)
Top clearance: max. 100 mm
Bottom clearance: max. 30 mm
🌫️ Flux system
Type: Selective spray fluxer (precision/drop-jet)
Axes: 2-axis (X/Y), servo-driven
Flux tank: 2 liters
Spray width: ~3–6 mm (130 µm nozzle)
Positioning accuracy: ±0.25 mm
🔥 Preheating
Type: Bottom-side IR preheating
Connected power: max. 10.2 kW
🌊 Solder module
Type: Selective mini-wave soldering
Axes: 3-axis (X/Y/Z), servo-driven
Nozzle diameter: ≥ 4.5 mm
Solder wave height: max. 5 mm
Solder capacity: ~10 kg
Max solder temperature: 330°C
Warm-up time: ~1.5 hours
Positioning accuracy: ±0.25 mm
🧪 Utilities
Nitrogen consumption: ~2 m³/h
Nitrogen pressure: ~3 bar
Compressed air: ~6 bar (<5 m³/h)
⚡ Electrical
Supply: 3× 230/400 V + N + PE
Frequency: 50 / 60 Hz
Power consumption: max. 26 kW
Current: max. 39 A
Fuse: 3 × 50 A (slow-blow)
Ersa versaflow 40/50 Selective Solder Machine. Specifications include: Machine dimensions - Length (base): 258 cm, Length (with conveyor): 358 cm, Width: 152.5 cm, Height: 180 cm, Weight: ~1,100 kg (without solder). Conveyor & PCB handling - Conveyor type: Pin & chain (roller optional), Conveyor angle: 0° (fixed), Conveyor speed: up to ~10 m/min, Positioning accuracy: ±0.25 mm, Max PCB/pallet weight: 5 kg. PCB size range - Width: 50 – 400 mm (option up to 500 mm), Length: 120 – 500 mm (option up to 600 mm), Top clearance: max. 100 mm, Bottom clearance: max. 30 mm. Flux system - Type: Selective spray fluxer (precision/drop-jet), Axes: 2-axis (X/Y), servo-driven, Flux tank: 2 liters, Spray width: ~3–6 mm (130 µm nozzle), Positioning accuracy: ±0.25 mm. Preheating - Type: Bottom-side IR preheating, Connected power: max. 10.2 kW. Solder module - Type: Selective mini-wave soldering, Axes: 3-axis (X/Y/Z), servo-driven, Nozzle diameter: ≥ 4.5 mm, Solder wave height: max. 5 mm, Solder capacity: ~10 kg, Max solder temperature: 330°C, Warm-up time: ~1.5 hours, Positioning accuracy: ±0.25 mm. Utilities - Nitrogen consumption: ~2 m³/h, Nitrogen pressure: ~3 bar, Compressed air: ~6 bar (<5 m³/h). Electrical - Supply: 3× 230/400 V + N + PE, Frequency: 50 / 60 Hz, Power consumption: max. 26 kW, Current: max. 39 A, Fuse: 3 × 50 A (slow-blow).
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 16 |
| Last activity | July 10, 2026 |
Machine dimensions
Length (base): 258 cm
Length (with conveyor): 358 cm
Width: 152.5 cm
Height: 180 cm
Weight: ~1,100 kg (without solder)
🔄 Conveyor & PCB handling
Conveyor type: Pin & chain (roller optional)
Conveyor angle: 0° (fixed)
Conveyor speed: up to ~10 m/min
Positioning accuracy: ±0.25 mm
Max PCB/pallet weight: 5 kg
PCB size range
Width: 50 – 400 mm (option up to 500 mm)
Length: 120 – 500 mm (option up to 600 mm)
Top clearance: max. 100 mm
Bottom clearance: max. 30 mm
🌫️ Flux system
Type: Selective spray fluxer (precision/drop-jet)
Axes: 2-axis (X/Y), servo-driven
Flux tank: 2 liters
Spray width: ~3–6 mm (130 µm nozzle)
Positioning accuracy: ±0.25 mm
🔥 Preheating
Type: Bottom-side IR preheating
Connected power: max. 10.2 kW
🌊 Solder module
Type: Selective mini-wave soldering
Axes: 3-axis (X/Y/Z), servo-driven
Nozzle diameter: ≥ 4.5 mm
Solder wave height: max. 5 mm
Solder capacity: ~10 kg
Max solder temperature: 330°C
Warm-up time: ~1.5 hours
Positioning accuracy: ±0.25 mm
🧪 Utilities
Nitrogen consumption: ~2 m³/h
Nitrogen pressure: ~3 bar
Compressed air: ~6 bar (<5 m³/h)
⚡ Electrical
Supply: 3× 230/400 V + N + PE
Frequency: 50 / 60 Hz
Power consumption: max. 26 kW
Current: max. 39 A
Fuse: 3 × 50 A (slow-blow)
Ersa versaflow 40/50 Selective Solder Machine. Specifications include: Machine dimensions - Length (base): 258 cm, Length (with conveyor): 358 cm, Width: 152.5 cm, Height: 180 cm, Weight: ~1,100 kg (without solder). Conveyor & PCB handling - Conveyor type: Pin & chain (roller optional), Conveyor angle: 0° (fixed), Conveyor speed: up to ~10 m/min, Positioning accuracy: ±0.25 mm, Max PCB/pallet weight: 5 kg. PCB size range - Width: 50 – 400 mm (option up to 500 mm), Length: 120 – 500 mm (option up to 600 mm), Top clearance: max. 100 mm, Bottom clearance: max. 30 mm. Flux system - Type: Selective spray fluxer (precision/drop-jet), Axes: 2-axis (X/Y), servo-driven, Flux tank: 2 liters, Spray width: ~3–6 mm (130 µm nozzle), Positioning accuracy: ±0.25 mm. Preheating - Type: Bottom-side IR preheating, Connected power: max. 10.2 kW. Solder module - Type: Selective mini-wave soldering, Axes: 3-axis (X/Y/Z), servo-driven, Nozzle diameter: ≥ 4.5 mm, Solder wave height: max. 5 mm, Solder capacity: ~10 kg, Max solder temperature: 330°C, Warm-up time: ~1.5 hours, Positioning accuracy: ±0.25 mm. Utilities - Nitrogen consumption: ~2 m³/h, Nitrogen pressure: ~3 bar, Compressed air: ~6 bar (<5 m³/h). Electrical - Supply: 3× 230/400 V + N + PE, Frequency: 50 / 60 Hz, Power consumption: max. 26 kW, Current: max. 39 A, Fuse: 3 × 50 A (slow-blow).
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
The Ersa Versaflow 40/50 is a selective soldering machine designed for precise and efficient PCB assembly. It features a robust build with base dimensions of 258 cm in length, extending to 358 cm including the conveyor, a width of 152.5 cm, and a height of 180 cm. The machine weighs approximately 1,100 kg without solder.
Conveyor and PCB handling are managed via a pin and chain system, with an optional roller conveyor. The conveyor operates at a fixed 0° angle and can reach speeds up to approximately 10 meters per minute, providing a positioning accuracy of ±0.25 mm. It supports PCB or pallet weights up to 5 kg.
The machine accommodates PCBs ranging in width from 50 to 400 mm, extendable up to 500 mm as an option, and lengths from 120 to 500 mm, with an optional extension up to 600 mm. Maximum component clearance is 100 mm on top and 30 mm underneath.
Flux application is performed by a selective spray fluxer using a precision drop-jet system on two servo-driven axes (X/Y). The flux tank holds 2 liters, and the spray width ranges from approximately 3 to 6 mm through a 130 µm nozzle, maintaining a positioning accuracy of ±0.25 mm.
Preheating is achieved with a bottom-side infrared system delivering up to 10.2 kW of connected power. The solder module employs a selective mini-wave soldering technique with three servo-driven axes (X/Y/Z). It uses nozzles with a diameter of at least 4.5 mm, creating a solder wave up to 5 mm high. The solder bath has a capacity of about 10 kg and can reach a maximum temperature of 330°C, with a warm-up time around 1.5 hours. Positioning accuracy in this module is also ±0.25 mm.
Utility requirements include nitrogen consumption at roughly 2 cubic meters per hour with a pressure of about 3 bar, and compressed air at approximately 6 bar with a flow less than 5 cubic meters per hour.
Electrically, the machine requires a 3-phase 230/400 V supply with neutral and protective earth, operating at 50 or 60 Hz. Maximum power consumption is 26 kW, with a current draw up to 39 A, protected by three slow-blow fuses rated at 50 A each.
This comprehensive set of features makes the Ersa Versaflow 40/50 suitable for selective soldering tasks requiring precision and flexibility in PCB handling and component clearance.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 16 |
| Last activity | July 10, 2026 |
Машина за селективно запояване Ersa versaflow 40/50
Selektívní pájecí stroj Ersa versaflow 40/50
Ersa versaflow 40/50 Selektiv loddemaskine
Ersa versaflow 40/50 Selektivlötanlage
Μηχανή επιλεκτικής συγκόλλησης Ersa versaflow 40/50
Ersa versaflow 40/50 Selective soldering machine
Máquina de soldadura selectiva Ersa versaflow 40/50
Machine de brasage sélectif Ersa versaflow 40/50
Stroj za selektivno lemljenje Ersa versaflow 40/50
Ersa versaflow 40/50 Szelektív forrasztógép
Macchina di saldatura selettiva Ersa versaflow 40/50
Ersa versaflow 40/50 Selektyvus litavimo aparatas
Ersa versaflow 40/50 Selectieve soldeermachine
Maszyna do lutowania selektywnego Ersa versaflow 40/50
Máquina de solda seletiva Ersa versaflow 40/50
Aparat de lipit selectiv Ersa versaflow 40/50
Ersa versaflow 40/50 Станок для селективной пайки
Mašina za selektivno lemljenje Ersa versaflow 40/50
Ersa versaflow 40/50 Selektiv lödmaskin
Bölgesel lehimleme makinası Ersa versaflow 40/50
EN
- Languages
English (GB)