18,000 €
Make an offerContact us to receive an offer.
| Option to cut tubes | no |
| CNC | no |
| CNC type | |
| ------------------- | |
| worked hours | 64687 hours |
| hours under power | |
| state | in working conditions |
| At local norms | yes |
| status | in production |
| Datasheet | Ermak Fibermak |
| Last availability date | 09/03/2026 |
The Ermaksan Fibermak is a robust industrial laser cutting machine manufactured in 2014, designed for precision and versatility in metal processing. It features four independent axes of movement—X, Y, U, and Z—with the U axis corresponding to an interchangeable table parallel to the X axis, allowing for flexible and efficient material handling. The machine is equipped with a high-quality cutting head from PRECITEC (Germany) that includes autofocus capabilities, enhancing cutting accuracy.
Powering the laser is an IPG fiber optic laser source delivering 2 kW of power, supported by an IPG water-to-air chiller to maintain optimal operating temperatures. The machine incorporates a shuttle-type interchangeable table system with hydraulic lifts, facilitating rapid material changes and improving workflow efficiency. Safety and precision are further enhanced by a touch sensor on the protective glass and automatic gas distribution regulators that maintain proper gas selection and pressure during cutting operations.
Control and operation are managed via a 15-inch touchscreen controller running Pronest CAD/CAM software and the TwinCat control system, providing an intuitive user interface and advanced programming capabilities. The machine also includes an ECR cutter control panel located at the rear, signal indicators for operational status, table height calibration features, and a FESTO adsorption air filter to maintain clean working conditions. The cutting table is sectional and equipped with an exhaust system to manage fumes and debris.
The machine shows signs of use with some dirt and wear but remains structurally intact. It is installed in a large industrial workshop environment and includes a control panel with display screen and buttons mounted on the right side. Multiple cables and pipes are connected underneath the machine body, indicating a complex but organized setup. The IPG laser source bears a label indicating technical specifications such as model LC 71 01-A 4 5/6 from 2013, voltage requirements of 400 V ±10% / 3 Ph / 50 Hz and 460 V ±10% / 3 Ph / 60 Hz, and cooling capacity of 5500 Watts.
As of December 17, 2025, the machine has accumulated 64,687 operating hours and continues to function. Potential buyers should note the machine's used condition and the detailed specifications provided to assess suitability for their production needs.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
4 independent axes of movement: X, Y, U, Z (U is the axis of the interchangeable table, parallel to the X axis)
Servo drive – SM BECKHOFF, Germany.
Cutting head with autofocus – PRECITEC (Germany). Autofocus
IPG fiber optic laser source. Source power: 2 kW
IPG water-to-air chiller
Shuttle-type interchangeable tables with hydraulic lift
Touch sensor on protective glass
Pronest CAD/CAM software
15-inch touchscreen controller
TwinCat control system
Signal indicators
Table height calibration
Gas distribution regulators – Automatic gas selection and pressure maintenance
ECR Cutter control panel on the rear of the machine
FESTO adsorption air filter
- Sectional exhaust table
Machine operating time as of December 17, 2025, is 64,687 hours. The machine continues to operate.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – large company |
| Active since | 2021 |
| Offers online | 4 |
| Last activity | Feb. 7, 2026 |
4 independent axes of movement: X, Y, U, Z (U is the axis of the interchangeable table, parallel to the X axis)
Servo drive – SM BECKHOFF, Germany.
Cutting head with autofocus – PRECITEC (Germany). Autofocus
IPG fiber optic laser source. Source power: 2 kW
IPG water-to-air chiller
Shuttle-type interchangeable tables with hydraulic lift
Touch sensor on protective glass
Pronest CAD/CAM software
15-inch touchscreen controller
TwinCat control system
Signal indicators
Table height calibration
Gas distribution regulators – Automatic gas selection and pressure maintenance
ECR Cutter control panel on the rear of the machine
FESTO adsorption air filter
- Sectional exhaust table
Machine operating time as of December 17, 2025, is 64,687 hours. The machine continues to operate.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Option to cut tubes | no |
| CNC | no |
| CNC type | |
| ------------------- | |
| worked hours | 64687 hours |
| hours under power | |
| state | in working conditions |
| At local norms | yes |
| status | in production |
| Datasheet | Ermak Fibermak |
| Last availability date | 09/03/2026 |
The Ermaksan Fibermak is a robust industrial laser cutting machine manufactured in 2014, designed for precision and versatility in metal processing. It features four independent axes of movement—X, Y, U, and Z—with the U axis corresponding to an interchangeable table parallel to the X axis, allowing for flexible and efficient material handling. The machine is equipped with a high-quality cutting head from PRECITEC (Germany) that includes autofocus capabilities, enhancing cutting accuracy.
Powering the laser is an IPG fiber optic laser source delivering 2 kW of power, supported by an IPG water-to-air chiller to maintain optimal operating temperatures. The machine incorporates a shuttle-type interchangeable table system with hydraulic lifts, facilitating rapid material changes and improving workflow efficiency. Safety and precision are further enhanced by a touch sensor on the protective glass and automatic gas distribution regulators that maintain proper gas selection and pressure during cutting operations.
Control and operation are managed via a 15-inch touchscreen controller running Pronest CAD/CAM software and the TwinCat control system, providing an intuitive user interface and advanced programming capabilities. The machine also includes an ECR cutter control panel located at the rear, signal indicators for operational status, table height calibration features, and a FESTO adsorption air filter to maintain clean working conditions. The cutting table is sectional and equipped with an exhaust system to manage fumes and debris.
The machine shows signs of use with some dirt and wear but remains structurally intact. It is installed in a large industrial workshop environment and includes a control panel with display screen and buttons mounted on the right side. Multiple cables and pipes are connected underneath the machine body, indicating a complex but organized setup. The IPG laser source bears a label indicating technical specifications such as model LC 71 01-A 4 5/6 from 2013, voltage requirements of 400 V ±10% / 3 Ph / 50 Hz and 460 V ±10% / 3 Ph / 60 Hz, and cooling capacity of 5500 Watts.
As of December 17, 2025, the machine has accumulated 64,687 operating hours and continues to function. Potential buyers should note the machine's used condition and the detailed specifications provided to assess suitability for their production needs.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2021 |
| Offers online | 4 |
| Last activity | Feb. 7, 2026 |
машина за лазерно рязане ermaksan Fibermak
Řezačka - laserový řezací stroj ermaksan Fibermak
ermaksan Fibermak laserskæremaskine
ermaksan Fibermak Laserschneidmaschine
μηχανή κοπής λέιζερ ermaksan Fibermak
ermaksan Fibermak laser cutting machine
Máquina de corte por láser ermaksan Fibermak
Machine de découpe laser ermaksan Fibermak
stroj za lasersko rezanje ermaksan Fibermak
ermaksan Fibermak lézervágó gép
Impianto taglio laser ermaksan Fibermak
lazerinio pjovimo mašina ermaksan Fibermak
ermaksan Fibermak Laser snij machine
Wycinarka laserowa ermaksan Fibermak
máquina de corte a laser ermaksan Fibermak
mașină de tăiat cu laser ermaksan Fibermak
Оптоволоконный лазер ermaksan SM 3000х1500 2000W
mašina za lasersko sečenje ermaksan Fibermak
ermaksan Fibermak laserskärmaskin
Lazer kesim makinesi ermaksan Fibermak
EN
- Languages
English (GB)