AMADA EUROPE 245 turret press
Technical data :
- CNC control: FANUC 18 i-P
- pressure: 20 Tons
- max. 31 station non-recapture punching format: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX)
- max. size of the cut sheet with interception: 1020 x 2540 mm
- max. size of the cut sheet with interception + 1 turn (optional): 1500 x 2540 mm
- max. sheet thickness on the ball table: 6 mm
- max. sheet thickness on the brush table: 3 mm
- max. permissible weight on the table: 100 kg
- punching accuracy: +-0.1 mm
- positioning accuracy: +-0.07 mm
- number of clamps/pneumatic holders: 2
- number of axes controlled simultaneously: 3: X, Y, C
- revolver speed: 25 rpm.
- number of strokes per minute, distance 25.4 mm, cylinder stroke 6.5 mm: 220 strokes / min.
- stroke punching, distance 1 mm, cylinder stroke 6.5 mm: 480 strokes / min.
- minimum programmable increment: 0.001 mm
- number of tool stations - 31, including 3 rotary ones
- max. tool diameter: 88.9 mm
- rotary stations: 2x1 1/4"; 1x2"
- max. sheet thickness for the rotary station: 3 mm
- slider: hydraulic
- lower turning point of the slider feed: 4 programmable points
- working table: X=600, Y=400
- memory capacity: 64 (~63 programs) Kb
- graphic screen: 10.4 "LCD
- stop time: 295ms
- air pressure: 5 kg/cm2 (bar)
- air quantity: 250 Nl/min
- amount of oil: 160 L
- light curtain (3 beams): standard in European countries
- installed power: 27 kW
- dimensions of the machine: L=4460 mm, l=2750 mm, h=2130 mm
- transport dimensions: L=4820 mm, l=2500 mm, h=2414 mm
- weight of the AMADA EUROPE 245 punching machine: 10,000 kg
- time worked: 35,000 man-hours
Production 2000.12, installation 2001
1st owner, service book with full machine history, machine in perfect condition, worked on thin sheets
Start-up guarantee
Service training included in the price.

Tools included in the price:

circles fi 3, fi 4.2, fi 5.5, fi 6.5, station A,
square 13, station B
rectangle 20x3, station B
rectangle 80x5, station D, 0 degrees
rectangle 80x5, station D, 90 degrees

standard working range is length 2000 x width 1000, after repositioning the working range is length 2500 x width 1000 and another reposition and length 3000 x width 1000

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Power in tons 20 T
Metal length 1020 mm
CNC type FANUC 18 i-P
Metal width 1290 mm
Max steel thickness 6 mm
Length with repositioning 2540 mm
Metal width with repositioning 2540 mm
Max Punching diameter 88.9 mm
Number of strokes per minute 400
Max. Weight of the workpiece 100 kg
Number of tools 19
-------------------
Weight 10000 kg
Worked hours 35000 hours
Hours under power
State good
At local norms ---------
Status in production
Datasheet Amada EUROPE 245
Client type User – small or medium company
Active since 2022
Offers online 2
Last activity Jan. 26, 2024

Description

AMADA EUROPE 245 turret press
Technical data :
- CNC control: FANUC 18 i-P
- pressure: 20 Tons
- max. 31 station non-recapture punching format: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX)
- max. size of the cut sheet with interception: 1020 x 2540 mm
- max. size of the cut sheet with interception + 1 turn (optional): 1500 x 2540 mm
- max. sheet thickness on the ball table: 6 mm
- max. sheet thickness on the brush table: 3 mm
- max. permissible weight on the table: 100 kg
- punching accuracy: +-0.1 mm
- positioning accuracy: +-0.07 mm
- number of clamps/pneumatic holders: 2
- number of axes controlled simultaneously: 3: X, Y, C
- revolver speed: 25 rpm.
- number of strokes per minute, distance 25.4 mm, cylinder stroke 6.5 mm: 220 strokes / min.
- stroke punching, distance 1 mm, cylinder stroke 6.5 mm: 480 strokes / min.
- minimum programmable increment: 0.001 mm
- number of tool stations - 31, including 3 rotary ones
- max. tool diameter: 88.9 mm
- rotary stations: 2x1 1/4"; 1x2"
- max. sheet thickness for the rotary station: 3 mm
- slider: hydraulic
- lower turning point of the slider feed: 4 programmable points
- working table: X=600, Y=400
- memory capacity: 64 (~63 programs) Kb
- graphic screen: 10.4 "LCD
- stop time: 295ms
- air pressure: 5 kg/cm2 (bar)
- air quantity: 250 Nl/min
- amount of oil: 160 L
- light curtain (3 beams): standard in European countries
- installed power: 27 kW
- dimensions of the machine: L=4460 mm, l=2750 mm, h=2130 mm
- transport dimensions: L=4820 mm, l=2500 mm, h=2414 mm
- weight of the AMADA EUROPE 245 punching machine: 10,000 kg
- time worked: 35,000 man-hours
Production 2000.12, installation 2001
1st owner, service book with full machine history, machine in perfect condition, worked on thin sheets
Start-up guarantee
Service training included in the price.

Tools included in the price:

circles fi 3, fi 4.2, fi 5.5, fi 6.5, station A,
square 13, station B
rectangle 20x3, station B
rectangle 80x5, station D, 0 degrees
rectangle 80x5, station D, 90 degrees

standard working range is length 2000 x width 1000, after repositioning the working range is length 2500 x width 1000 and another reposition and length 3000 x width 1000

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Power in tons 20 T
Metal length 1020 mm
CNC type FANUC 18 i-P
Metal width 1290 mm
Max steel thickness 6 mm
Length with repositioning 2540 mm
Metal width with repositioning 2540 mm
Max Punching diameter 88.9 mm
Number of strokes per minute 400
Max. Weight of the workpiece 100 kg
Number of tools 19
-------------------
Weight 10000 kg
Worked hours 35000 hours
Hours under power
State good
At local norms ---------
Status in production

About this seller

Client type User – small or medium company
Active since 2022
Offers online 2
Last activity Jan. 26, 2024

Here is a selection of similar machines

AMADA Europe 245 CNC punching machine