Sorry, this offer is no longer available on Exapro

Ermak CNCAP-4100X200 Press brake cnc/nc

Here is a selection of similar machines

CNC press brake ERMAK CNCAP-4100X200 was manufactured in 2005 in Turkey. It is a press with a maximum pressure of 200 tons with a bending length of 4100 mm. The set includes the machine's technical documentation.

Technical data of the ERMAK CNC HAP-4100 X 200 press brake

- bending length: 4100 mm
- pressure: 200 t
- maximum bending capacity (St42): 6 mm
- maximum stroke: 200 mm
- distance between columns: 3550 mm
- table height: 900 mm
- projection 400 mm
- bumper stroke: 800 mm
- speed of free movement down: 80 mm / sec.
- bending speed: 7 mm / sec.
- speed of return up: 70 mm / sec.
- main engine power: 15 kW
- maximum pressure: 265 bar
- amount of oil: 200 l
- working temperature: 0-50 degrees C
- IP protection degree: 54
- dimensions of the CNC bending machine (length x width x height): 4800 x 2170 x 2795 mm
- machine weight: 15,000 kg
- deflection arrow compensation
- protection behind the device: light curtain
- Operation and Maintenance Manual of the ERMAK CNC AP-4100X200 CNC press brake - operation and maintenance documentation

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Strength 200 T
Folding length 4100 mm
Distance between uprights 3550 mm
CNC
Vertical stroke 200 mm
Working speed 7 mm/s
Motor power 15 kW
-------------------
Length x width x height 4800.0 × 2170.0 × 2795.0
Weight 15000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2010
Offers online 377
Last activity March 29, 2024

Description

CNC press brake ERMAK CNCAP-4100X200 was manufactured in 2005 in Turkey. It is a press with a maximum pressure of 200 tons with a bending length of 4100 mm. The set includes the machine's technical documentation.

Technical data of the ERMAK CNC HAP-4100 X 200 press brake

- bending length: 4100 mm
- pressure: 200 t
- maximum bending capacity (St42): 6 mm
- maximum stroke: 200 mm
- distance between columns: 3550 mm
- table height: 900 mm
- projection 400 mm
- bumper stroke: 800 mm
- speed of free movement down: 80 mm / sec.
- bending speed: 7 mm / sec.
- speed of return up: 70 mm / sec.
- main engine power: 15 kW
- maximum pressure: 265 bar
- amount of oil: 200 l
- working temperature: 0-50 degrees C
- IP protection degree: 54
- dimensions of the CNC bending machine (length x width x height): 4800 x 2170 x 2795 mm
- machine weight: 15,000 kg
- deflection arrow compensation
- protection behind the device: light curtain
- Operation and Maintenance Manual of the ERMAK CNC AP-4100X200 CNC press brake - operation and maintenance documentation

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Strength 200 T
Folding length 4100 mm
Distance between uprights 3550 mm
CNC
Vertical stroke 200 mm
Working speed 7 mm/s
Motor power 15 kW
-------------------
Length x width x height 4800.0 × 2170.0 × 2795.0
Weight 15000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2010
Offers online 377
Last activity March 29, 2024