PKZZ 315 SERIES H TYPE BODY WITH WIDE TRAY
DOUBLE HANDLE ECCENTRIC PRESS
capacity of 315 tons
Stroke 400 mm
mold load 650 mm
number of strokes 18-22 min / min
bottom table 2500 * 1400 mm
top table 2450 * 1400 mm
press weight 60 tons
press sizes FB 2300 mm
press sizes LR 3500 mm
press dimensions HT 6500 mm


Erfurt Press Mechanical Maintenance

1. Brake lining and clutch lining replaced
2. Felt, bearing and disc control and replacement of the brake and clutch assembly were done.
3. Connecting rod control and red bearing control were done
4. Pinion and shaft Volant bearing checks were made
5. Pressure relief valve with sensor, pressure gauge and pressure switch were installed for air tanks (clutch group and balance pistons).
6. Conditioner was installed before clutch and brake air inlets.
7. Press safety valve was installed for brake and clutch pistons.
8. Lubrication blocks were checked and cleaned.
9. The lubrication pipes on the upper side have changed.
10. The main engine bearings were checked and if necessary replaced.
11. Coach removed
a. The welding structure will be strengthened by opening the welding mouth for the inner and outer ribs.
b. Reglage and screw group were removed and checked. Gear changes were made.
c. Internal elements (oring, felt) were changed.
D. Regime crosses were checked.
to. The mechanical insurance group has changed.
f. Encoder was mounted on the coach gear group.
g. He made the replacement of the bearings of the regulation motor.
12. Cam box has been renewed. Encoder assembly has been done.
13. Coach slide adjustment was made.
14. The upper air tank will be placed in a horizontal position or displacement has been made because it exceeds the crane level.
15.
16. Air system inlet, regulator, conditioner, pressure gauge and panel were renewed.
17. By removing the balancing cylinders (4 pieces), the felt group and the parts that need to be changed have been changed.
18. Air connection pipes of balancing cylinders have changed.
19. If the press is met with problems related to lubrication and air leaks, it has been fixed by the company.
20. In the event of a press jam, a nut tightening and loosening hydraulic system has been installed to open the machine.




Making Erfurt Press Electrical Installation Conform to CE Standard

1. Press Main control panel was changed.
2. PİLZ press safety PLC was installed and programmed.
3. Siemens PLC assembly and programming was done.
4. Siemens KTP 900 operator screen was assembled and programmed.
5. Pilz front and rear light barrier assembly was done.
6. Press Çiftel control board was replaced.
7. Electrical installation colomble was changed.
8. Control panel replacement was made.
9. Emergency stop buttons were changed.
10. Cam box replacement was done.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Power in tons 315 T
Table length 2500 mm
Table width 1400 mm
Ram stroke 400 mm
Nbr of strokes/min 22
Motor power 45 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Erfurt PKZZ 315
Client type Reseller
Active since 2020
Offers online 1
Last activity Feb. 27, 2024

Description

PKZZ 315 SERIES H TYPE BODY WITH WIDE TRAY
DOUBLE HANDLE ECCENTRIC PRESS
capacity of 315 tons
Stroke 400 mm
mold load 650 mm
number of strokes 18-22 min / min
bottom table 2500 * 1400 mm
top table 2450 * 1400 mm
press weight 60 tons
press sizes FB 2300 mm
press sizes LR 3500 mm
press dimensions HT 6500 mm


Erfurt Press Mechanical Maintenance

1. Brake lining and clutch lining replaced
2. Felt, bearing and disc control and replacement of the brake and clutch assembly were done.
3. Connecting rod control and red bearing control were done
4. Pinion and shaft Volant bearing checks were made
5. Pressure relief valve with sensor, pressure gauge and pressure switch were installed for air tanks (clutch group and balance pistons).
6. Conditioner was installed before clutch and brake air inlets.
7. Press safety valve was installed for brake and clutch pistons.
8. Lubrication blocks were checked and cleaned.
9. The lubrication pipes on the upper side have changed.
10. The main engine bearings were checked and if necessary replaced.
11. Coach removed
a. The welding structure will be strengthened by opening the welding mouth for the inner and outer ribs.
b. Reglage and screw group were removed and checked. Gear changes were made.
c. Internal elements (oring, felt) were changed.
D. Regime crosses were checked.
to. The mechanical insurance group has changed.
f. Encoder was mounted on the coach gear group.
g. He made the replacement of the bearings of the regulation motor.
12. Cam box has been renewed. Encoder assembly has been done.
13. Coach slide adjustment was made.
14. The upper air tank will be placed in a horizontal position or displacement has been made because it exceeds the crane level.
15.
16. Air system inlet, regulator, conditioner, pressure gauge and panel were renewed.
17. By removing the balancing cylinders (4 pieces), the felt group and the parts that need to be changed have been changed.
18. Air connection pipes of balancing cylinders have changed.
19. If the press is met with problems related to lubrication and air leaks, it has been fixed by the company.
20. In the event of a press jam, a nut tightening and loosening hydraulic system has been installed to open the machine.




Making Erfurt Press Electrical Installation Conform to CE Standard

1. Press Main control panel was changed.
2. PİLZ press safety PLC was installed and programmed.
3. Siemens PLC assembly and programming was done.
4. Siemens KTP 900 operator screen was assembled and programmed.
5. Pilz front and rear light barrier assembly was done.
6. Press Çiftel control board was replaced.
7. Electrical installation colomble was changed.
8. Control panel replacement was made.
9. Emergency stop buttons were changed.
10. Cam box replacement was done.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Power in tons 315 T
Table length 2500 mm
Table width 1400 mm
Ram stroke 400 mm
Nbr of strokes/min 22
Motor power 45 kW
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2020
Offers online 1
Last activity Feb. 27, 2024

Here is a selection of similar machines

Revised Erfurt PKZZ 315 Eccentric press