|Length x width x height||- × - × -|
|Hours under power|
|At local norms||---------|
three roller bending machine with CNC ERCOLINA CE100H3 reinforcing tie art. S100A2
Designed for flexible H-beam and channel bar in the "heavy" side pipes VGP, brackets, pipe profile
- Three of the drive roller driven by individual motors installed to ensure maximum performance and minimum deviation.
- Trёhkoordinatnaya system to prevent lateral twisting, bending iron angle profiles the apex angle outward or inward bending and other complex applications.
- Low-voltage (24V) remote control panel with foot pedal switch, the touch pad and 2 joysticks for positioning the central and prevent any distortion of the side rollers.
- Forged shafts rollers, heat-treated and calibrated, of nickel - chromium steel to reduce to a minimum deformation.
- The design of the steel body heavy duty and hard components for a large section modulus.
- Programmable electronic control unit of the central positioning of the roller retaining memory 8 individual programs (for one or more passes).
- Threaded shafts with rollers micrometric adjustment flanges can eliminate the need for gaskets.
Shaft diameter (mm)
The diameter of standard rollers (mm / inch)
Standard shaft length (mm / inch)
long shaft length (mm / inch)
220 (on request)
The maximum stroke of the central roller (mm / inch)
Shaft speed roller (r / min)
Independent drive rolls
The upper drive motor (kW)
The lower drive motors (kV)
1,5 x 2
Capacity of the hydraulic motor (kW)
The main frame of the machine
The force of the piston (tons)
Operating position of the machine
A horizontal. / Vertically.
Positioning the central roller
Positioning correctors to prevent any distortion
Monoblock structure of the machine housing
number of programs
Electric Foot pedal control (low voltage).
Noise level (operating machine)
147 x 210 x 167
Operating voltage (V)
380/220/440 - 480; 50 - 60 Hz
Please note that this description may have been translated automatically. Contact us for further information.