Eratic Movilterm 3 Gcal/h Mobile grill combustion chamber

Manufacturer Eratic
Model Movilterm 3 Gcal/h
Year 2003
Location Spain ES
Category Industrial boilers
Product id P70614124


Contact the seller

You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller

Client type User – large company
Active since 2017
Offers online 3
Last activity Oct. 19, 2018


Power 3200 kW
Worked hours 0 hours
Hours under power 0 hours
State like new
At local norms ---------


Mobile combustion chamber for biomass, of 3 GCAL / h. The camera is new since it is a project that was not completed.

Movalterm 3 GCAL / H Camera
Movilterm combustion chamber and grill homes designed and manufactured by Innergy are ready to work with a wide range of fuels and provide exceptional efficiency in the combustion of the most diverse materials and waste. The Movilterm camera is a prefabricated camera entirely in our workshops, sending the client ready for final assembly. It only needs a suitable base for its weight, and it has mobile grills and automatic dry ash extraction system.
Chamber designed for the use of the most diverse fuels: wood debris, tree barks, wood chips, shavings, all types of forest waste, prunings, etc., as well as any wood residue, even those whose combustion can produce slag, Allowing granulometry and varied humidities.
To feed the boiler, we will have an introduction pusher system, which is driven by a hydraulic group. This system receives the fuel from a conveyor belt and introduces it to the grill of the home. The automatic loading comes dosed and evenly distributed across the width of the combustion grill.
The combustion chamber of monoblock construction is formed by a self-supporting structure, built entirely in our workshops and covered externally with metal sheets and within which are located the elements of the chamber itself. In the combustion zone, bricks and refractory concrete and wedges with a high content of alumina will be used, duly separated from the outer walls by special insulated low density brick
The Movilterm grill is independently coupled to the combustion chamber. Our equipment allows you to burn separately or together different fuels. The grill is composed of a strong metallic frame on which the casting profiles that support the grills, manufactured in chrome cast and supported by rows, a fixed and a mobile, are supported.
The movement of the same is carried out by a hydraulic group and pistons, being possible to combust with the grill stopped or with this in movement, according to characteristics of the fuel used. The number of movements that the grill makes is adjustable and adjusts to the characteristics of the fuel. The movement of the grate is controlled according to the calorific power required, which advances the fuel in a manner appropriate to the natural progress of the combustion over the entire surface of the grate, from the feeding to the final evacuation of the slag and ash. Automatic ash discharge reduces disturbances in the furnace, providing better control of combustion emissions.

Automatic Loading Mouth - Thrust Feed
Installed under the combustion hearth, there is a dry-ash evacuation system composed, in general terms, of a drag scraper arranged along the combustion grille assembly of the chamber, and an endless screw that allows the extraction The ashes of the system.
The entry of biomass into the combustion chamber is done by means of an automatic feeder by pusher consisting of three elements: a reception hopper with clapper, a material accumulation chamber and an automatic pusher. The biomass is discharged by gravity from the transport system to the hopper. From this it goes to the accumulation enclosure which incorporates a double level system of fuel load level to guarantee that the camera always works at full load. This system consists of an Emitter / Receiver unit of infrared rays and its corresponding maneuver in the electrical panel. Then the automatic pusher actuated a hydraulic group introduces the biomass received in the combustion chamber.

Dry ash evacuation
Installed under the combustion hearth, there is a dry-ash evacuation system composed, in general terms, of a drag scraper arranged along the combustion grille assembly of the chamber, and an endless screw that allows the extraction The ashes of the system.
For the movement of the scraper there is a hydraulic group that will allow to regulate and to program its operation.
This hydraulic group, which will also drive the chamber grills, is equipped with the necessary elements for its correct operation: motor, pump, solenoid valves, safety valve, filter, manometer, etc. The hydraulic circuit is equipped with an adjustable scale pressure switch mounted at the outlet of the pump, so that if any piston encounters an obstacle that has a higher resistance than the one marked, it reverses the cycle, avoiding any damage.

Please note that this description may have been translated automatically. Contact us for further information.

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines


Contact the seller