The machine will be on a General overhaul (pictures from original condition at the former Company)
The machine has been constructed for the metal cutting process of workpieces in one clamping session. Especially blanks made of brass with a diameter 90mm x approx 100mm length would be machined with this machine.

description:
- workpiece support with switch plate with clamping station type round table with horizontal axis with 5 workpiece stations

processing units:
- drill spindle and thread cutting units
- drill capacity up to 2 3/4" and 81,53mm in brass
- thread cutting up to 2 1/2" und metric thread

additional technical data:
- spindle stroke: 175 mm
- number of spindles: 8
- feed rate 0.2 m/min

Machine is equipped with a feeding-and unloading unit for workpieces. ( feed capacity 3 -4 pieces/min and cycle time 15 - 20 sec.)
furthermore incl. coolant device

further technical details:
- spindle taper: SK40
- spindle stroke: 175 mm
- number of spindles: 8 pieces
- number of stations: 5 pieces
- cycle time: 15-20 sec
- revolutions per minute drilling: 225...1037 rpm
- revolutions per minute threading: 50...316 rpm
- feed: 0,2 m/min
- total power requirement: 30 kW
- weight of the machine: approx. 9,0 t
- space requirements of the machine: approx. 3,9x2,4x2,5 m
- dimensions of machine: L:3,9xB:2,2xH:2,7 m
- dimensions L x W x H + plant: 2,7x2,52x2,25 m

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Length x width x height 3900.0 × 2200.0 × 2700.0
Weight 9000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Gnutti FM OR 7.175
Client type Reseller
Active since 2015
Offers online 109
Last activity March 28, 2024

Description

The machine will be on a General overhaul (pictures from original condition at the former Company)
The machine has been constructed for the metal cutting process of workpieces in one clamping session. Especially blanks made of brass with a diameter 90mm x approx 100mm length would be machined with this machine.

description:
- workpiece support with switch plate with clamping station type round table with horizontal axis with 5 workpiece stations

processing units:
- drill spindle and thread cutting units
- drill capacity up to 2 3/4" and 81,53mm in brass
- thread cutting up to 2 1/2" und metric thread

additional technical data:
- spindle stroke: 175 mm
- number of spindles: 8
- feed rate 0.2 m/min

Machine is equipped with a feeding-and unloading unit for workpieces. ( feed capacity 3 -4 pieces/min and cycle time 15 - 20 sec.)
furthermore incl. coolant device

further technical details:
- spindle taper: SK40
- spindle stroke: 175 mm
- number of spindles: 8 pieces
- number of stations: 5 pieces
- cycle time: 15-20 sec
- revolutions per minute drilling: 225...1037 rpm
- revolutions per minute threading: 50...316 rpm
- feed: 0,2 m/min
- total power requirement: 30 kW
- weight of the machine: approx. 9,0 t
- space requirements of the machine: approx. 3,9x2,4x2,5 m
- dimensions of machine: L:3,9xB:2,2xH:2,7 m
- dimensions L x W x H + plant: 2,7x2,52x2,25 m

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Length x width x height 3900.0 × 2200.0 × 2700.0
Weight 9000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2015
Offers online 109
Last activity March 28, 2024

Here is a selection of similar machines

GNUTTI FM OR 7.175 Transfer Machine / Rotary Transfer Machine