used Engel machine type Victory ES3550/600HL with additional peripheral devices.

Number of hours: 1979
Injection unit:
Screw diameter: 70mm
Injection volume: approx. 1500cc
Closing unit:
Closing force: 600T
Table dimensions: attachment, enlarged version
Ejector: hydraulic
Closing system: hydraulic, tie-barless
Control:
CC100 – Polish language
Additional equipment:
Hydraulic core string on the fixed side – x3
Hydraulic core string on the moving side – x3
Pneumatic valves – x2
Hydraulic cascade valves – x6
Automatic drives of side covers on both sides of the form,

The machine is serviced by an authorized Engel service center,
In 2020, a set of hydraulic pumps was replaced with new ones,
Dimensions:
Weight – 38T short circuit unit, 10T injection unit,
Dimensions (L x W x H): 9410 x 2480 x 2580
Power supply:
Pump/Motor: 60kW
Heaters: 60kW
Total power max.: 120kW
 Other equipment:
The robot is present - originally integrated with Engel's IM Machine, but due to the needs it was not installed and safety was omitted in IM (status unknown),
Technomagnete magnetic plates – 4 zones per plate, condition unknown. The device has been dismantled and not used.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Clamping force 600 T
Screw diameter 70 mm
Shot volume 1500 cm³
Robot interface
Mould size
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status under power
Client type User – small or medium company
Active since 2022
Offers online 1
Last activity March 13, 2024

Description

used Engel machine type Victory ES3550/600HL with additional peripheral devices.

Number of hours: 1979
Injection unit:
Screw diameter: 70mm
Injection volume: approx. 1500cc
Closing unit:
Closing force: 600T
Table dimensions: attachment, enlarged version
Ejector: hydraulic
Closing system: hydraulic, tie-barless
Control:
CC100 – Polish language
Additional equipment:
Hydraulic core string on the fixed side – x3
Hydraulic core string on the moving side – x3
Pneumatic valves – x2
Hydraulic cascade valves – x6
Automatic drives of side covers on both sides of the form,

The machine is serviced by an authorized Engel service center,
In 2020, a set of hydraulic pumps was replaced with new ones,
Dimensions:
Weight – 38T short circuit unit, 10T injection unit,
Dimensions (L x W x H): 9410 x 2480 x 2580
Power supply:
Pump/Motor: 60kW
Heaters: 60kW
Total power max.: 120kW
 Other equipment:
The robot is present - originally integrated with Engel's IM Machine, but due to the needs it was not installed and safety was omitted in IM (status unknown),
Technomagnete magnetic plates – 4 zones per plate, condition unknown. The device has been dismantled and not used.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Clamping force 600 T
Screw diameter 70 mm
Shot volume 1500 cm³
Robot interface
Mould size
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status under power

About this seller

Client type User – small or medium company
Active since 2022
Offers online 1
Last activity March 13, 2024

Here is a selection of similar machines

Engel Victory ES3550/600HL Injection moulding machine