ENGEL ES 7050 / 800 K Injection moulding machine Low working hours

46,000 €

Make an offer

Manufacturer	ENGEL
Model	RS 7060 / 800 K
Year	1997
Location	Poland
Category	Injection moulding machines
Product id	P240408113
Language	Машина за леене под налягане ENGEL RS 7060 / 800 K Vstřikolis ENGEL RS 7060 / 800 K ENGEL RS 7060 / 800 K Sprøjtestøbemaskine ENGEL RS 7060 / 800 K Spritzgießmaschine Μηχανή χύτευσης με έγχυση ENGEL RS 7060 / 800 K ENGEL ES 7050 / 800 K Injection moulding machine Inyectora de plástico ENGEL RS 7060 / 800 K Presse à injecter ENGEL RS 7060 / 800 K Stroj za injekcijsko prešanje ENGEL RS 7060 / 800 K ENGEL RS 7060 / 800 K Fröccsöntő gép Pressa ad iniezione ENGEL RS 7060 / 800 K Įpurškimo formavimo mašina ENGEL RS 7060 / 800 K ENGEL RS 7060 / 800 K Spuitgietmachine Wtryskarka ENGEL ES 7060 / 800 K Máquina de injecção ENGEL RS 7060 / 800 K Mașină de turnat prin injecție ENGEL RS 7060 / 800 K ENGEL RS 7060 / 800 K Термопластавтомат Mašina za brizganje ENGEL RS 7060 / 800 K ENGEL RS 7060 / 800 K Formsprutningsmaskin Enjeksiyon kalıplama makinesi ENGEL RS 7060 / 800 K

with robotic manipulator

Screw diameter mm 105
Plasticizing stroke mm 480
Screw speed r/min 5-130
Plasticizing rate 2,3) g/sec 117
Injection rate 4) g/sec 800
Injection rate 4) Injection pressure increased g/sec 630
Maximum swept volume cm3 4160
Maximum shot weight 2) g 3745
Specific injection pressure bar 1650
Specific inj.pressure increased 5) bar 2000
Nozzle stroke mm 950
Nozzle contact force kN 150
Heating capacity kW 96.2
Number of heating zones incl. nozzle 7

Pump drive power kW 110

Clamping force kN 8000
Locking force kN 8800
Opening stroke mm 1000
Ejector force kN 215
Ejector stroke mm 300
Mould height max. mm 1000
Mould height min. mm 400
Mould fixing platens - total size mm 1620 x 1525
Between the tie-bars horizontal mm 1120
Between the tie-bars vertical mm 1025
Tie-bar diameter mm 180

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Clamping force	800 T
Screw diameter	105 mm
Tie bar spacing (H)	1120 mm
Tie bar spacing (V)	1025 mm
Shot volume	4160 cm³
Shot weight	3745 g
Pressure on material	1650 bar
Platen length	1620 mm
Platen width	1525 mm
Equipped with robot	Yes
Robot interface	manipulator X/Y
Number of heating zones	7
Opening of the press	1000 mm
Mould size	400 mm
-------------------
Length x width x height	11585.0 × 2670.0 × 3070.0
Weight	60000 kg
Worked hours	23578 hours
Hours under power
State	good
At local norms	---------
Status	visible

Client type	Consultant
Active since	2024
Offers online	1
Last activity	April 12, 2024

Description

Specifications

Clamping force	800 T
Screw diameter	105 mm
Tie bar spacing (H)	1120 mm
Tie bar spacing (V)	1025 mm
Shot volume	4160 cm³
Shot weight	3745 g
Pressure on material	1650 bar
Platen length	1620 mm
Platen width	1525 mm
Equipped with robot	Yes
Robot interface	manipulator X/Y
Number of heating zones	7
Opening of the press	1000 mm
Mould size	400 mm
-------------------
Length x width x height	11585.0 × 2670.0 × 3070.0
Weight	60000 kg
Worked hours	23578 hours
Hours under power
State	good
At local norms	---------
Status	visible

About this seller

Client type	Consultant
Active since	2024
Offers online	1
Last activity	April 12, 2024

ENGEL ES 7050 / 800 K Injection moulding machine Low working hours

Description

Specifications

About this seller

Here is a selection of similar machines

Categories

Menu

ENGEL ES 7050 / 800 K Injection moulding machine