Price on request
Make an offer| Cutting width | mm |
| Cutting height | mm |
| Engine power | kW |
| ------------------- | |
| Length x width x height | 6480.0 × 1400.0 × 1838.0 |
| Weight | 1400 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 08/05/2026 |
The Emmegi DOPPIA MAGIC is a double-headed industrial saw designed specifically for cutting aluminum profiles. It features two saw heads mounted on a robust steel sheet base, each guided by high-strength steel bars that ensure precise movement of the mobile saw heads. Each saw head is equipped with a blade holder assembly capable of pneumatic rotation of the horizontal axis, allowing angular cuts from 90° internally to 22°30' externally. Intermediate angles can be manually adjusted using a dedicated stop.
The saw blades, fitted with hard metal cutting edges, are advanced by an oleopneumatic cylinder that operates only when the blade motor is running and the vises are securely locked. Blade cooling is provided during cutting through an adjustable flow rate system. The machine is designed for single-operator use from designated control areas.
Key technical specifications include a minimum cutting length of 310 mm and a maximum cutting length of 5000 mm. Blade diameters are 450 or 500 mm with a shaft diameter of 32 mm. The blade motor power is 2.2 kW, operating at 2800 rpm (50 Hz), complemented by a 400 W DC motor at 2000 rpm. Installed power totals 5.6 kW. The blade feed speed ranges from 0 to 60 mm/s, with peripheral cutting speeds of 66 m/s for 450 mm blades and 73 m/s for 500 mm blades. The cart translation speed is 20 m/min, operating at an exercise pressure of 6 to 8 bar with air consumption of 15 liters per cycle at 6 bar.
Included equipment features two Widia blades, integral pneumatic protections for the cutting area, pneumatic horizontal and vertical vises, a profiled landscaping path, profile support with metric ruler, a standard wedge pair, and a suction device.
The TRP (MAGIC) control system includes a backlit LCD display with two lines of 40 characters, pre-configuration for industrial label printer connection, execution of unit cuts, storage for 100 profile correction values with automatic calculations for angled cuts, storage for 20 cutting lists (50 lines each), and creation of 100 types of joinery frames (1500 formulas).
The machine measures 6480 mm in length, 1400 mm in width, and 1838 mm in height, with a total weight of 1400 kg. It is equipped with two saw blade guards featuring transparent covers and black-yellow warning stripes, a central control panel with buttons and an emergency stop, and pneumatic or hydraulic cylinders controlling the saw blade guards' movements. Electrical cables and hoses are neatly routed along the machine base. Safety warning labels and CE marking are present on the left cutting unit's vertical panel. The machine appears clean and well-maintained with no visible damage or rust, and the surface paint is intact with minimal wear marks.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
DOUBLE HEAD SAW ALUMINUM EMMEGI DOPPIA MAGIC used
The machine is a double-headed electronic chainsaw with automatic movement of the moving head. It is used solely for cutting aluminum profiles.
The machine consists of a steel sheet base to which two high-strength steel bars are attached: their function is to guide the mobile saw head in its movement.
Two saw heads, each mounted on a carriage, consist of a blade holder assembly with pneumatic rotation of the horizontal axis to the outside.
The following angular positions can be obtained: from 90° internally to 22°30' externally
Intermediate angular positions are obtained by means of a stop provided for this purpose and manually adjustable.
An oleopneumatic cylinder operates the advance of the blade which only leaves the vertical plane when the motor is running (blade rotating) and the vises are locked.
The cutting is carried out using blades with hard metal cutting edges.
The blade cooling, which only occurs during cutting, is achieved by means of a system with an adjustable flow rate.
The machine can only be used by one operator at a time, from the designated control areas.
TECHNICAL SPECIFICATIONS
Minimum cutting length : 310 mm
Maximum cutting length : 5000 mm
Blade diameter at the widia : 450 or 500 mm
Blade shaft diameter : 32 mm
Blade motor power : 2.2 kW
Blade motor speeds (50 Hz) 2800 rpm
DC motor power (2000 rpm) 400 W
Installed power : 5.6 kW
Blade feed speed : 0+60 mm/s
Blade cutting speed 450 (peripheral blade speed) : 66 m/s
Blade cutting speed 500 (peripheral blade speed) : 73 m/s
Cart translation speed : 20 m/min
Exercise pressure 6+8 bar
Air consumption per cycle at 6 bar : 15 L
Length : 6480 mm
Width : 1400 mm
Height : 1838 mm
Weight 1400 kg
EQUIPMENT PROVIDED
Machine specifications:
2 blades with Widia
2 integral pneumatic protections for the cutting area
Pair of pneumatic horizontal and vertical vises
Profiled landscaping path
Profile support and metric ruler
Standard wedge pair
Suction device
TRP (MAGIC) control characteristics:
LCD display with 2 lines of 40 characters each, backlit
Pre-configuration for industrial label printer connection
Execution of unit cuts
Storage of 100 profile correction values with automatic measurement calculation for angled cuts
Storing 20 cutting lists (50 lines each) from the keyboard
Creation of 100 types of joinery frames (1500 formulas)
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 105 |
| Last activity | May 13, 2026 |
DOUBLE HEAD SAW ALUMINUM EMMEGI DOPPIA MAGIC used
The machine is a double-headed electronic chainsaw with automatic movement of the moving head. It is used solely for cutting aluminum profiles.
The machine consists of a steel sheet base to which two high-strength steel bars are attached: their function is to guide the mobile saw head in its movement.
Two saw heads, each mounted on a carriage, consist of a blade holder assembly with pneumatic rotation of the horizontal axis to the outside.
The following angular positions can be obtained: from 90° internally to 22°30' externally
Intermediate angular positions are obtained by means of a stop provided for this purpose and manually adjustable.
An oleopneumatic cylinder operates the advance of the blade which only leaves the vertical plane when the motor is running (blade rotating) and the vises are locked.
The cutting is carried out using blades with hard metal cutting edges.
The blade cooling, which only occurs during cutting, is achieved by means of a system with an adjustable flow rate.
The machine can only be used by one operator at a time, from the designated control areas.
TECHNICAL SPECIFICATIONS
Minimum cutting length : 310 mm
Maximum cutting length : 5000 mm
Blade diameter at the widia : 450 or 500 mm
Blade shaft diameter : 32 mm
Blade motor power : 2.2 kW
Blade motor speeds (50 Hz) 2800 rpm
DC motor power (2000 rpm) 400 W
Installed power : 5.6 kW
Blade feed speed : 0+60 mm/s
Blade cutting speed 450 (peripheral blade speed) : 66 m/s
Blade cutting speed 500 (peripheral blade speed) : 73 m/s
Cart translation speed : 20 m/min
Exercise pressure 6+8 bar
Air consumption per cycle at 6 bar : 15 L
Length : 6480 mm
Width : 1400 mm
Height : 1838 mm
Weight 1400 kg
EQUIPMENT PROVIDED
Machine specifications:
2 blades with Widia
2 integral pneumatic protections for the cutting area
Pair of pneumatic horizontal and vertical vises
Profiled landscaping path
Profile support and metric ruler
Standard wedge pair
Suction device
TRP (MAGIC) control characteristics:
LCD display with 2 lines of 40 characters each, backlit
Pre-configuration for industrial label printer connection
Execution of unit cuts
Storage of 100 profile correction values with automatic measurement calculation for angled cuts
Storing 20 cutting lists (50 lines each) from the keyboard
Creation of 100 types of joinery frames (1500 formulas)
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Cutting width | mm |
| Cutting height | mm |
| Engine power | kW |
| ------------------- | |
| Length x width x height | 6480.0 × 1400.0 × 1838.0 |
| Weight | 1400 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 08/05/2026 |
The Emmegi DOPPIA MAGIC is a double-headed industrial saw designed specifically for cutting aluminum profiles. It features two saw heads mounted on a robust steel sheet base, each guided by high-strength steel bars that ensure precise movement of the mobile saw heads. Each saw head is equipped with a blade holder assembly capable of pneumatic rotation of the horizontal axis, allowing angular cuts from 90° internally to 22°30' externally. Intermediate angles can be manually adjusted using a dedicated stop.
The saw blades, fitted with hard metal cutting edges, are advanced by an oleopneumatic cylinder that operates only when the blade motor is running and the vises are securely locked. Blade cooling is provided during cutting through an adjustable flow rate system. The machine is designed for single-operator use from designated control areas.
Key technical specifications include a minimum cutting length of 310 mm and a maximum cutting length of 5000 mm. Blade diameters are 450 or 500 mm with a shaft diameter of 32 mm. The blade motor power is 2.2 kW, operating at 2800 rpm (50 Hz), complemented by a 400 W DC motor at 2000 rpm. Installed power totals 5.6 kW. The blade feed speed ranges from 0 to 60 mm/s, with peripheral cutting speeds of 66 m/s for 450 mm blades and 73 m/s for 500 mm blades. The cart translation speed is 20 m/min, operating at an exercise pressure of 6 to 8 bar with air consumption of 15 liters per cycle at 6 bar.
Included equipment features two Widia blades, integral pneumatic protections for the cutting area, pneumatic horizontal and vertical vises, a profiled landscaping path, profile support with metric ruler, a standard wedge pair, and a suction device.
The TRP (MAGIC) control system includes a backlit LCD display with two lines of 40 characters, pre-configuration for industrial label printer connection, execution of unit cuts, storage for 100 profile correction values with automatic calculations for angled cuts, storage for 20 cutting lists (50 lines each), and creation of 100 types of joinery frames (1500 formulas).
The machine measures 6480 mm in length, 1400 mm in width, and 1838 mm in height, with a total weight of 1400 kg. It is equipped with two saw blade guards featuring transparent covers and black-yellow warning stripes, a central control panel with buttons and an emergency stop, and pneumatic or hydraulic cylinders controlling the saw blade guards' movements. Electrical cables and hoses are neatly routed along the machine base. Safety warning labels and CE marking are present on the left cutting unit's vertical panel. The machine appears clean and well-maintained with no visible damage or rust, and the surface paint is intact with minimal wear marks.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 105 |
| Last activity | May 13, 2026 |
Emmegi DOPPIA MAGIC Дърводелска циркулярна машина
Emmegi DOPPIA MAGIC Pila na dřevo
Emmegi DOPPIA MAGIC Træsav
Emmegi DOPPIA MAGIC Holzsäge
Emmegi DOPPIA MAGIC Ξυλόπριονο
Emmegi DOPPIA MAGIC Wood saw
Emmegi DOPPIA MAGIC Sierra para madera
Emmegi DOPPIA MAGIC Scie à bois
Emmegi DOPPIA MAGIC Stolarska pila
Emmegi DOPPIA MAGIC Fa fűrész
Emmegi DOPPIA MAGIC Sega per legno
Emmegi DOPPIA MAGIC Medžio pjūklas
Emmegi DOPPIA MAGIC Houtzaag
Emmegi DOPPIA MAGIC Piła do drewna
Emmegi DOPPIA MAGIC Serra para madeira
Emmegi DOPPIA MAGIC Fierăstrău pentru lemn
Emmegi DOPPIA MAGIC Деревообрабатывающая пила
Emmegi DOPPIA MAGIC Stolarska testera za drvo
Emmegi DOPPIA MAGIC Träsåg
Emmegi DOPPIA MAGIC Ahşap testere
EN
- Languages
English (GB)