Flexible frame size adjustable
Squeegee currently 300mm
Pneumatic circuit board clamping
Manual fine adjustment for board alignment
Fine adjustment of the height of the circuit board
Speed ​​adjustment for parallel board separation
(lowering the printing table after printing)
Foot switch for opening after pressure (closing via electromagnets) and lowering of the circuit board
Adjustable squeegee pressure and limitation of the squeegee height adjusting screws
Connection for pneumatic frames (e.g. LTC Quattro Flex or others)
Squeegees are interchangeable and various lengths are available from Ekra.
The printer has some scratches on the paint and the lettering is not all cleaning agents survived - but otherwise it is technically in perfect condition. Runs very smoothly, is clean and in good entertainment condition.
The printer also includes:
Original Ekra base
Large IGBT pressure nest (milled aluminum block) incl. 50mm
Increase for the mechanics for printing larger parts
Various pins and 5x shims to stabilize the circuit board - some of them still in their original packaging
Adjustment set for changing between 1.5mm and 1.6mm circuit boards
The IGBT Drucknet was recently replaced with the pneumatic circuit board clamp.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible
Client type Reseller
Active since 2018
Offers online 21
Last activity March 28, 2024

Description

Flexible frame size adjustable
Squeegee currently 300mm
Pneumatic circuit board clamping
Manual fine adjustment for board alignment
Fine adjustment of the height of the circuit board
Speed ​​adjustment for parallel board separation
(lowering the printing table after printing)
Foot switch for opening after pressure (closing via electromagnets) and lowering of the circuit board
Adjustable squeegee pressure and limitation of the squeegee height adjusting screws
Connection for pneumatic frames (e.g. LTC Quattro Flex or others)
Squeegees are interchangeable and various lengths are available from Ekra.
The printer has some scratches on the paint and the lettering is not all cleaning agents survived - but otherwise it is technically in perfect condition. Runs very smoothly, is clean and in good entertainment condition.
The printer also includes:
Original Ekra base
Large IGBT pressure nest (milled aluminum block) incl. 50mm
Increase for the mechanics for printing larger parts
Various pins and 5x shims to stabilize the circuit board - some of them still in their original packaging
Adjustment set for changing between 1.5mm and 1.6mm circuit boards
The IGBT Drucknet was recently replaced with the pneumatic circuit board clamp.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status visible

About this seller

Client type Reseller
Active since 2018
Offers online 21
Last activity March 28, 2024

Here is a selection of similar machines

EKRA XM Screen printing machine