Showing 1 - 20 out of 79
Year:
Casati Macchina Veneer cutter with manual shifter of the Italian brand Casati Macchine. Ready to take away. Possibility of a personal tour in Chropyn. More info phone, email. Maybe a discount if reasonable.Year: 2016
Board thickness | 60 mm |
---|---|
Feed advance | 10 m/min |
Edge thickness | 3 mm |
---|
Year:
Balestrini Pico Round End Tenoner Hourly Production: 600/700 Tenons Tenon Width: Max. 100 mm + Thickness Tenon Thickness: Max. 30 mm Tenon Depth: Max. 50 mm Table Tilt: Max. 20 Degrees Workpiece Fence Swiveling 45 Degrees Cutter Rotation 9000 RPM Cutter Motor 4HP Cycle Motor 1HP (2) Pneumatic Hold-Downs, One On Each TableYear:
Technical Specifications EDGEBANDING MATERIAL Melamine/PVC/ABS/PP/veneer: .4-3mm Solid wood strips: up to 8mm Max. Edge banding height: 65mm PANEL Thickness, min-max: 10-60mm Length, min-max: 120-unlimited mm Width min-max: 60mm-unlimitedmm MACHINE Working speed: 9/14 m/min Total electrical output, kW: 12.9 Machine Description Feeding Station Pre-Milling PF-12 Duomelt Gluepot Pressure Rollers End Trimming V-8 Top and bottom trim unit BC-S Corner Rounding FD-60 …Year:
Doucet Return Conveyor is Not Included Removal will be at Buyer's Expense Premilling Unit End-Trimming Top & Bottom Trimming Top & Bottom Finish/Bevel Trimming Corner-Rounding Top & Bottom Scraping Top & Bottom Buffing Heat Finish Sound/Safety EnclosureYear:
SCMI K-201 SINGLE-SIDED EDGE-BANDER (230/60/3 electrics)Year: 2016
Brandt Model Ambition 1120 FC / KDF 120 C Edgebander Joint-Trimming (Pre-Milling) Unit Pneumatic Guillotine Three-Roll Pressure Section Double-Motor End Trimming Unit Top & Bottom Fine-Trimming Unit Single-Motor Contour Trimming (Corner-Rounding) Unit Quick-Change Profile Scraping Unit Finish Scraping Unit Edgebanding Thickness: 0.4 - 3mm Minimum Workpiece Length: 5.5" (140mm) Workpiece Thickness: 8 - 40mm (5/16" - 1.5") Feed Speed: 26 …Year:
Double End Tenoner with Top and Bottom Scoring/Cut-off Units, one Jump and one Fixed Shaper Unit each Side Four 4HP (3KW)Trim/Cut-off Motors 2 (2 each side) 30mm Bore on Trim Units 150mm Saw Blade Dia. Two 5HP (4KW) Jump Shaper Unit (1 each side) Two 4HP (4KW) Fixed Shaper Unit (1 each side) Shapers have 40mm Bore Shaper Tooling Min. …Year: 2010
Brandt model Ambition 1650 FC High Flex Edge Bander Edge Band Thickness 0.4 - 12 mm (0.016 - 1/2") Coil Cutoff Maximum 0.8 X 60mm and 3.0 x 45mm (PVC) Edge Band Height 12-65mm (1/2" - 2-9/16") Panel length Min. 160mm (6-3/8" Panel Width Min. 70mm (2-3/4") Panel Thickness 8mm (5/16") to 60mm (2-3/8") Feed Speed Variable 8m/min (26FPM) to …Year: 2014
Cehisa Model PRO-10 Edgebander with Pre-Mill (2014) Panel Thickness: 8 - 60mm Two Motor Pre-Milling Station EVA Glue Pot Pneumatic Guillotine Three-Roll Pressure Section Two Motor End-Trim Unit Top & Bottom Fine Trim Units Top & Bottom Profile Scrape Units Top & Bottom Finish Scrape Unit Top & Bottom Buffing Unit Coil Feed Disk Rubber-Padded Feed Chain Two Speed Feed: …Year: 2010
Homag Single-Sided Edgebanding Machine, Model Ambition 2270 - Jubilee - Top & Bottom Separating Agent Spray Device - Two-Motor Pre-Milling Unit (Electro-Pneum. Jump for First Unit) - Panel Pre-Heater - Quick Melt Gluing Unit - Multi-Purpose Magazine Capable of Running Coiled Material (2 Rolls), Strips, and Solid-Wood Bands - Servo-Controlled Edge Feeding - Clipping Unit - Seven-Roll Pressure Section - …Year:
Meinert P 620D/B-L 3000/1300 Min/Max Panel Width: 9.45" - 51.18" Min/Max Panel Length: 9.84" - 118.11" Max Panel Stack Height From The Ground: 62.99" Work Cycles/Minute: 18 Loading System: Vacuum/Suction Cups 112 m3/h Capacity IMA Combima II/650/A/R3 EVA Hotmelt Glue System Max Panel Width: 51.18" Max Feed Speed: 164.04 Ft/Min Operating Units Right Side: 14 Operating Units Left Side: 13 …Year: 2011
Specifications Model: KAL 210 600/480V 3 Phase Mfg Year: 2011 Pre-Mill (Diamond Blades) Pre-Heat Corner Rounding ** New Glue Pot ** Comes with Boomerang ZHR01 Optimat (New Belts)Year:
Specifications Panel height 10 – 60 opt. (120) mm Band thickness 0,3 – 3 mm Minimum ray with concave curve 20 mm Minimum panel length 280 mm Feed speed 3 m. / min. 20 m. / min. Total installed power 4.5 Kw Operating pressure 7 – 8 bar Overall size 1000mm x 1100mm x 1200 mm Weight 400Kg Features, Specifications, …Year:
Model: ES42 2 HP 230V Single Phase Features, Specifications, Dimensions & Weight data is approximate and to the best of our knowledge.Year:
Model ME-15 220 V Single Phase Features, Specifications, Dimensions & Weight data is approximate and to the best of our knowledge.Year: 1998
MFG Year : 1998 Model : 300 3 Phase 380 V 50 Hz Top and bottom trimming Edge trimming Buffing unit Feed speeds : 8 and 16 m/min