Price on request
Make an offer| Metal length | 4000 mm |
| Metal width | 2000 mm |
| Max steel thickness | 2.5 mm |
| Type of source | Plasma |
| Source model | hypertherm hpr260xl |
| CNC | Yes |
| Type of CNC | |
| Power | 260 W |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/06/2026 |
Durma PLC-2040 Plasma Cutter, manufactured in 2012, is a CNC-controlled cutting machine designed for precision metal fabrication. The machine features a Siemens Sinumerik control system, ensuring accurate and efficient operation. It has a robust cutting table measuring 2000 mm by 4000 mm (approximately 6' x 12'), suitable for handling large metal sheets.
This plasma cutter operates with a power output of 260 W and supports a maximum steel thickness of 2.5 mm. It is equipped with a Hypertherm HPR260XL plasma torch, capable of cutting capacities including a pierce capacity of 1.5 inches and edge start cutting up to 2.5 inches. The cutting angle ranges between 2 to 4 degrees, allowing for precise angled cuts. Supported gases include oxygen (O2), nitrogen (N2), H35, F5, and air, providing versatility for different cutting requirements.
The machine includes a dedicated fume extraction system by Durma, with visible exhaust ventilation ducting connected above the cutting table and to the cutting head, which helps maintain a clean working environment. The plasma torch is equipped with a brake-away system for added safety and operational convenience.
The control panel features a screen displaying the cutting software interface, along with control knobs, keypad, an emergency stop button, and a key switch for secure operation. The control console also bears a 'Powered by METALFX' label. The electrical cabinet is mounted on the side of the machine for easy access.
The machine is presented in a clean and well-maintained condition, with a clean surrounding area and organized workspace. Two large gas cylinders on a wheeled cart are available nearby, indicating readiness for different gas supplies. Coiled cables or hoses are present on the floor, suggesting standard operational setup.
This Durma PLC-2040 plasma cutter is ideal for metal fabrication and manufacturing shops seeking reliable CNC plasma cutting capabilities. The current owner is willing to provide operator training. The machine is offered as-is, where-is.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Machine Description:
Durma PLC-2040 Plasma Cutter
Year of Manufacture: 2012
Control System: Siemens Sinumerik
Table Size: 6' x 12' (2000mm x 4000mm)
Cutting Capacity (Pierce Capacity): 1.5"
Cutting Capacity (Edge Start): 2.5"
Output Current: 260A
Gasses Supported: O2, N2, H35, F5, Air
Cutting Angle: 2-4 degrees
Machine Equipped With: Hypertherm HPR260XL
Fume Extraction System: Durma
Current Owner: Willing to Provide Operator Training
Features: Plasma Torch Brake Away System, Remote Control, Diagnostic, New Torch Head
Technical Condition: As-is, where-is
Ideal for: Metal fabrication, manufacturing & fabrication shops
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 25 |
| Last activity | June 8, 2026 |
Machine Description:
Durma PLC-2040 Plasma Cutter
Year of Manufacture: 2012
Control System: Siemens Sinumerik
Table Size: 6' x 12' (2000mm x 4000mm)
Cutting Capacity (Pierce Capacity): 1.5"
Cutting Capacity (Edge Start): 2.5"
Output Current: 260A
Gasses Supported: O2, N2, H35, F5, Air
Cutting Angle: 2-4 degrees
Machine Equipped With: Hypertherm HPR260XL
Fume Extraction System: Durma
Current Owner: Willing to Provide Operator Training
Features: Plasma Torch Brake Away System, Remote Control, Diagnostic, New Torch Head
Technical Condition: As-is, where-is
Ideal for: Metal fabrication, manufacturing & fabrication shops
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Metal length | 4000 mm |
| Metal width | 2000 mm |
| Max steel thickness | 2.5 mm |
| Type of source | Plasma |
| Source model | hypertherm hpr260xl |
| CNC | Yes |
| Type of CNC | |
| Power | 260 W |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/06/2026 |
Durma PLC-2040 Plasma Cutter, manufactured in 2012, is a CNC-controlled cutting machine designed for precision metal fabrication. The machine features a Siemens Sinumerik control system, ensuring accurate and efficient operation. It has a robust cutting table measuring 2000 mm by 4000 mm (approximately 6' x 12'), suitable for handling large metal sheets.
This plasma cutter operates with a power output of 260 W and supports a maximum steel thickness of 2.5 mm. It is equipped with a Hypertherm HPR260XL plasma torch, capable of cutting capacities including a pierce capacity of 1.5 inches and edge start cutting up to 2.5 inches. The cutting angle ranges between 2 to 4 degrees, allowing for precise angled cuts. Supported gases include oxygen (O2), nitrogen (N2), H35, F5, and air, providing versatility for different cutting requirements.
The machine includes a dedicated fume extraction system by Durma, with visible exhaust ventilation ducting connected above the cutting table and to the cutting head, which helps maintain a clean working environment. The plasma torch is equipped with a brake-away system for added safety and operational convenience.
The control panel features a screen displaying the cutting software interface, along with control knobs, keypad, an emergency stop button, and a key switch for secure operation. The control console also bears a 'Powered by METALFX' label. The electrical cabinet is mounted on the side of the machine for easy access.
The machine is presented in a clean and well-maintained condition, with a clean surrounding area and organized workspace. Two large gas cylinders on a wheeled cart are available nearby, indicating readiness for different gas supplies. Coiled cables or hoses are present on the floor, suggesting standard operational setup.
This Durma PLC-2040 plasma cutter is ideal for metal fabrication and manufacturing shops seeking reliable CNC plasma cutting capabilities. The current owner is willing to provide operator training. The machine is offered as-is, where-is.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 25 |
| Last activity | June 8, 2026 |
Плазмен режещ машинa Durma PLC-2040
Plazmový řezací stroj Durma PLC-2040
Durma PLC-2040 Plasmaskæremaskine
Durma PLC-2040 Plasmaschneidmaschine
Μηχανή κοπής πλάσματος Durma PLC-2040
Durma PLC-2040 Plasma cutting machine
Máquina de corte por plasma Durma PLC-2040
Machine de découpe plasma Durma PLC-2040
Stroj za plazma rezanje Durma PLC-2040
Durma PLC-2040 Plazmavágó gép
Macchina da taglio al plasma Durma PLC-2040
Plazminio pjovimo staklės Durma PLC-2040
Durma PLC-2040 Plasmasnijmachine
Maszyna do cięcia plazmowego Durma PLC-2040
Máquina de corte a plasma Durma PLC-2040
Mașină de tăiat cu plasmă Durma PLC-2040
Durma PLC-2040 Плазменный станок для резки
Mašina za plazma sečenje Durma PLC-2040
Durma PLC-2040 Plasmaskärmaskin
Plazma kesme makinesi Durma PLC-2040
EN
- Languages
English (GB)