7,000 €
Make an offer| Power in tons | 2.5 T |
| Table length | 420 mm |
| Table width | 300 mm |
| Engine Power | 1.5 kW |
| ------------------- | |
| Length x width x height | 1100.0 × 980.0 × 1950.0 |
| Weight | 700 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Dunkes HZT 2,5 |
| Last availability date | 08/04/2026 |
This listing is for a DUNKES hydraulic press, model HZT 2.5, manufactured in 1994. The press offers a pressing force of 2.5 tons and features a throat depth of 180 mm. The working table measures 420 x 300 mm and includes an opening of 60 x 185 mm. The ram surface diameter is 40 mm, with a clamping pin bore of 20 mm and a ram stroke of 160 mm. The maximum installation height is 250 mm, which can be increased by 80 mm by shortening the piston rod.
The machine operates with a hydraulic pressure of 135 bar and has a hydraulic tank capacity of approximately 100 liters. It is powered by a 1.5 kW drive motor connected to a 400 Volt, 50 Hz mains supply. The press features rapid traverse speeds of 65 mm/sec downwards and 160 mm/sec upwards, with a working speed of 8.3 mm/sec. The table height above the floor is 950 mm.
Additional operational features include pressure and travel cut-off, 2-hand operation for safety, a stroke counter, and safe press control with two monitored hydraulic valves. The machine complies with UVV 11.064 and VGB 7.n.5.2 standards for manual insertion work. Electrical circuit and hydraulic diagrams are available for reference.
The press measures 1100 mm in length, 980 mm in width, and 1950 mm in height, weighing approximately 700 kg. It has recorded 32,047 operating hours. The machine is offered as-is, where-is, and is described to be in very good condition.
Visually, the machine is painted green and bears DUNKES branding on the control panel. The control panel includes a pressure gauge, knobs, and buttons for operation. There are two metal work tables equipped with clamps at the front. The machine shows some signs of wear, including chipped paint at the base. A power cable with an orange plug is present on the floor near the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: DUNKES
Model: HZT 2.5
Year of Manufacture: 1994
Pressing Force: 2.5 tons
Throat: 180 mm
Table Surface: 420 x 300 mm
Opening in the Table: 60 x 185 mm
Ram Surface: Ø 40 mm
Clamping Pin Bore: Ø 20 mm
Ram Stroke: 160 mm
Installation Height Max: 250 mm
Rapid Traverse Downwards: 65 mm/sec
Rapid Traverse Upwards: 160 mm/sec
Working Speed: 8.3 mm/sec
Table Height Above Floor: 950 mm
Hydraulic Operating Pressure: 135 bar
Hydraulic Tank Capacity: Approx. 100 liters
Drive Power: 1.5 kW
Mains Connection: 400 Volt, 50 Hz
Additional Features:
- Installation height can be increased by 80 mm by shortening the piston rod
- Pressure and travel cut-off
- 2-hand operation on the machine
- Stroke counter
- Safe press control with 2 monitored hydraulic valves
- UVV 11.064 VGB 7.n.5.2 (for manual insertion work)
Operating Hours: 32,047 hours read
Electrical Circuit Diagram and Hydraulic Diagram: Available
Space Requirement (L x W x H): 1100 x 980 x 1950 mm
Weight: 700 kg
Condition: Very good condition, as-is, where-is
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 64 |
| Last activity | April 14, 2026 |
Manufacturer: DUNKES
Model: HZT 2.5
Year of Manufacture: 1994
Pressing Force: 2.5 tons
Throat: 180 mm
Table Surface: 420 x 300 mm
Opening in the Table: 60 x 185 mm
Ram Surface: Ø 40 mm
Clamping Pin Bore: Ø 20 mm
Ram Stroke: 160 mm
Installation Height Max: 250 mm
Rapid Traverse Downwards: 65 mm/sec
Rapid Traverse Upwards: 160 mm/sec
Working Speed: 8.3 mm/sec
Table Height Above Floor: 950 mm
Hydraulic Operating Pressure: 135 bar
Hydraulic Tank Capacity: Approx. 100 liters
Drive Power: 1.5 kW
Mains Connection: 400 Volt, 50 Hz
Additional Features:
- Installation height can be increased by 80 mm by shortening the piston rod
- Pressure and travel cut-off
- 2-hand operation on the machine
- Stroke counter
- Safe press control with 2 monitored hydraulic valves
- UVV 11.064 VGB 7.n.5.2 (for manual insertion work)
Operating Hours: 32,047 hours read
Electrical Circuit Diagram and Hydraulic Diagram: Available
Space Requirement (L x W x H): 1100 x 980 x 1950 mm
Weight: 700 kg
Condition: Very good condition, as-is, where-is
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Power in tons | 2.5 T |
| Table length | 420 mm |
| Table width | 300 mm |
| Engine Power | 1.5 kW |
| ------------------- | |
| Length x width x height | 1100.0 × 980.0 × 1950.0 |
| Weight | 700 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Dunkes HZT 2,5 |
| Last availability date | 08/04/2026 |
This listing is for a DUNKES hydraulic press, model HZT 2.5, manufactured in 1994. The press offers a pressing force of 2.5 tons and features a throat depth of 180 mm. The working table measures 420 x 300 mm and includes an opening of 60 x 185 mm. The ram surface diameter is 40 mm, with a clamping pin bore of 20 mm and a ram stroke of 160 mm. The maximum installation height is 250 mm, which can be increased by 80 mm by shortening the piston rod.
The machine operates with a hydraulic pressure of 135 bar and has a hydraulic tank capacity of approximately 100 liters. It is powered by a 1.5 kW drive motor connected to a 400 Volt, 50 Hz mains supply. The press features rapid traverse speeds of 65 mm/sec downwards and 160 mm/sec upwards, with a working speed of 8.3 mm/sec. The table height above the floor is 950 mm.
Additional operational features include pressure and travel cut-off, 2-hand operation for safety, a stroke counter, and safe press control with two monitored hydraulic valves. The machine complies with UVV 11.064 and VGB 7.n.5.2 standards for manual insertion work. Electrical circuit and hydraulic diagrams are available for reference.
The press measures 1100 mm in length, 980 mm in width, and 1950 mm in height, weighing approximately 700 kg. It has recorded 32,047 operating hours. The machine is offered as-is, where-is, and is described to be in very good condition.
Visually, the machine is painted green and bears DUNKES branding on the control panel. The control panel includes a pressure gauge, knobs, and buttons for operation. There are two metal work tables equipped with clamps at the front. The machine shows some signs of wear, including chipped paint at the base. A power cable with an orange plug is present on the floor near the machine.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 64 |
| Last activity | April 14, 2026 |
Хидравлична преса DUNKES HZT 2,5
Hydraulický lis DUNKES HZT 2,5
DUNKES HZT 2,5 Hydraulisk presse
DUNKES HZT 2,5 Hydraulikpresse
Υδραυλική πίεση DUNKES HZT 2,5
DUNKES HZT 2,5 Hydraulic press
Prensa hidráulica DUNKES HZT 2,5
Presse hydraulique DUNKES HZT 2,5
Hidraulična preša DUNKES HZT 2,5
DUNKES HZT 2,5 Hidraulikus nyomás
Pressa idraulica DUNKES HZT 2,5
Hidraulinis presas DUNKES HZT 2,5
DUNKES HZT 2,5 Hydraulische pers
Prasa hydrauliczna DUNKES HZT 2,5
Pressão hidráulica DUNKES HZT 2,5
Presa hidraulica DUNKES HZT 2,5
DUNKES HZT 2,5 Гидравлический пресс
Hidraulična presa DUNKES HZT 2,5
DUNKES HZT 2,5 Hydraulisk press
Hidrolik Pres DUNKES HZT 2,5
EN
- Languages
English (GB)