Price on request
Make an offer| Manufacturer | Dunkes |
|---|---|
| Model | HDS 125 |
| Year | 1987 |
| Location | Germany
|
| Category | Forging - Hydraulic presses |
| Product id | P230720144 |
| Language |
Dunkes HDS 125
Hydraulický lis Dunkes HDS 125
Dunkes HDS 125
Dunkes HDS 125 Hydraulikpresse
Dunkes HDS 125
Dunkes HDS 125 Hydraulic press
Prensa hidráulica Dunkes HDS 125
Presse hydraulique Dunkes HDS 125
Dunkes HDS 125
Dunkes HDS 125
Pressa idraulica Dunkes HDS 125
Dunkes HDS 125
Dunkes HDS 125
Prasa hydrauliczna Dunkes HDS 125
Dunkes HDS 125
Dunkes HDS 125
Dunkes HDS 125 Гидравлический пресс
Dunkes HDS 125
Dunkes HDS 125
Hidrolik Pres Dunkes HDS 125
|
| Type | H-Frame |
| Power in tons | 125 T |
| Table length | 1000 mm |
| Table width | 700 mm |
| Ram stroke | 250 mm |
| Distance between columns | 1050 mm |
| Engine Power | 30 kW |
| ------------------- | |
| Length x width x height | 1400.0 × 2000.0 × 3500.0 |
| Weight | 8500 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 11/02/2026 |
The Dunkes HDS 125 is a hydraulic double-column high-speed drawing press, manufactured in 1987. It features a robust H-frame design with a maximum pressure capacity of 125 tons on the upper piston and a retraction force of 15 tons. The ram has a stroke length of 250 mm and is guided by a 4-fold V-guide system to ensure precision during pressing operations. The press table measures 1000 x 700 mm, providing a substantial working area, and the distance between the columns at the front is 1050 mm, allowing for versatile tool setups.
This machine is powered by a 30 kW pump drive, with a total drive power of approximately 40 kW operating at 380 V and 50 Hz. It offers variable stroke speeds, with lifting speeds up and down at 400 mm/sec and stroke speeds at full pressure ranging between 18 to 55 mm/sec. The drawing cushion integrated into the table delivers a force of 25 tons with a stroke of 125 mm, and the die cushion speed ranges from 85 to 144 mm/sec, with a back speed of 240 mm/sec.
Equipped with a CNC control type CNC 1000, the press allows direct input of all press and process data, including tool information. Safety features include a SICK light barrier curtain with a protective height of 400 mm, two-hand safety release, and an automatic run-on control device, enabling automatic operation via the light barrier. The machine also includes a selector switch for multiple operating sequences such as setup, two-hand, foot release, single and two-cycle modes, protective device or die cushion mode, and ejector function.
Additional accessories include a hydraulic ejector in the ram with a force/stroke of 1 ton/125 mm, a controlled die cushion installed in the lower table, and a tool insertion device at the back featuring hydraulic tool clamping on the lower table and hydraulic pin clamping in the upper table. A separate control cabinet and oil cooler are attached to the hydraulic system to support operation.
The press is equipped with pressure gauges near the control panel for monitoring the upper ram and die cushion pressures. The control panel, located on the right side of the machine, includes a screen and multiple buttons for operational control. A yellow safety guard is installed on the left side of the press opening to enhance operator safety. The machine shows signs of use, including some dirt and wear marks on the surface, indicating it has been previously operated but maintained for continued use.
Overall, the Dunkes HDS 125 is a substantial and precise hydraulic drawing press suitable for various industrial forming applications, combining powerful performance with comprehensive control and safety features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Dunkes
hydraulic double-column (high-speed) drawing press
Type HDS 125 built in 1987
Pressure capacity of the upper piston 125 tons
Retraction force of the upper piston 15 to
Hydraulic ejector in the ram force/stroke 1 to/125 mm
Table size 1,000 x 700 mm
Ram area approx. 1,000 x 700 mm
Installation height max. 450 mm
Passage between the uprights at the front 1,050 mm
Upper piston stroke 250 mm
Lifting speed up/down 400 mm/sec
Stroke speed full pressure 18 -55 mm/sec
Drawing cushion in the table force/stroke 25 to/125 mm
Die cushion speed 85-144 or back 240 mm/sec.
Pump drive 30 kW
Total drive approx. 40 kW - 380 V - 50 Hz
Weight approx. 8,500 kg
Accessories / special equipment
– CNC control type CNC 1000 for controlling the press with direct input of all press and process data, also for corresponding tool data
Controlled die cushion installed in the lower table - ejector in the ram (40 mm)
· 4-fold V-guide of the upper piston for precision pressing
· SICK light barrier curtain with a protective height of 400 mm with 2-hand safety release and automatic run-on control device, automatic operation can be controlled via light barrier
· Selector switch for the following sequences: SETUP / two-hand / foot release / single-cycle / two-cycle / protective device or die cushion mode / ejector
· Contact manometer for displaying the pressure of the upper ram and die cushion
Cutting impact damping selectable via selector switch,
· Tool insertion device on the back with hydraulic tool clamping on the lower table, hydraulic pin clamping in the upper table, separate control cabinet and oil cooler attached to the hydraulic system.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 172 |
| Last activity | April 17, 2026 |
Dunkes
hydraulic double-column (high-speed) drawing press
Type HDS 125 built in 1987
Pressure capacity of the upper piston 125 tons
Retraction force of the upper piston 15 to
Hydraulic ejector in the ram force/stroke 1 to/125 mm
Table size 1,000 x 700 mm
Ram area approx. 1,000 x 700 mm
Installation height max. 450 mm
Passage between the uprights at the front 1,050 mm
Upper piston stroke 250 mm
Lifting speed up/down 400 mm/sec
Stroke speed full pressure 18 -55 mm/sec
Drawing cushion in the table force/stroke 25 to/125 mm
Die cushion speed 85-144 or back 240 mm/sec.
Pump drive 30 kW
Total drive approx. 40 kW - 380 V - 50 Hz
Weight approx. 8,500 kg
Accessories / special equipment
– CNC control type CNC 1000 for controlling the press with direct input of all press and process data, also for corresponding tool data
Controlled die cushion installed in the lower table - ejector in the ram (40 mm)
· 4-fold V-guide of the upper piston for precision pressing
· SICK light barrier curtain with a protective height of 400 mm with 2-hand safety release and automatic run-on control device, automatic operation can be controlled via light barrier
· Selector switch for the following sequences: SETUP / two-hand / foot release / single-cycle / two-cycle / protective device or die cushion mode / ejector
· Contact manometer for displaying the pressure of the upper ram and die cushion
Cutting impact damping selectable via selector switch,
· Tool insertion device on the back with hydraulic tool clamping on the lower table, hydraulic pin clamping in the upper table, separate control cabinet and oil cooler attached to the hydraulic system.
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Type | H-Frame |
| Power in tons | 125 T |
| Table length | 1000 mm |
| Table width | 700 mm |
| Ram stroke | 250 mm |
| Distance between columns | 1050 mm |
| Engine Power | 30 kW |
| ------------------- | |
| Length x width x height | 1400.0 × 2000.0 × 3500.0 |
| Weight | 8500 kg |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 11/02/2026 |
The Dunkes HDS 125 is a hydraulic double-column high-speed drawing press, manufactured in 1987. It features a robust H-frame design with a maximum pressure capacity of 125 tons on the upper piston and a retraction force of 15 tons. The ram has a stroke length of 250 mm and is guided by a 4-fold V-guide system to ensure precision during pressing operations. The press table measures 1000 x 700 mm, providing a substantial working area, and the distance between the columns at the front is 1050 mm, allowing for versatile tool setups.
This machine is powered by a 30 kW pump drive, with a total drive power of approximately 40 kW operating at 380 V and 50 Hz. It offers variable stroke speeds, with lifting speeds up and down at 400 mm/sec and stroke speeds at full pressure ranging between 18 to 55 mm/sec. The drawing cushion integrated into the table delivers a force of 25 tons with a stroke of 125 mm, and the die cushion speed ranges from 85 to 144 mm/sec, with a back speed of 240 mm/sec.
Equipped with a CNC control type CNC 1000, the press allows direct input of all press and process data, including tool information. Safety features include a SICK light barrier curtain with a protective height of 400 mm, two-hand safety release, and an automatic run-on control device, enabling automatic operation via the light barrier. The machine also includes a selector switch for multiple operating sequences such as setup, two-hand, foot release, single and two-cycle modes, protective device or die cushion mode, and ejector function.
Additional accessories include a hydraulic ejector in the ram with a force/stroke of 1 ton/125 mm, a controlled die cushion installed in the lower table, and a tool insertion device at the back featuring hydraulic tool clamping on the lower table and hydraulic pin clamping in the upper table. A separate control cabinet and oil cooler are attached to the hydraulic system to support operation.
The press is equipped with pressure gauges near the control panel for monitoring the upper ram and die cushion pressures. The control panel, located on the right side of the machine, includes a screen and multiple buttons for operational control. A yellow safety guard is installed on the left side of the press opening to enhance operator safety. The machine shows signs of use, including some dirt and wear marks on the surface, indicating it has been previously operated but maintained for continued use.
Overall, the Dunkes HDS 125 is a substantial and precise hydraulic drawing press suitable for various industrial forming applications, combining powerful performance with comprehensive control and safety features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 172 |
| Last activity | April 17, 2026 |
EN
- Languages
English (GB)