|Cooling capacity||9.5 kW|
|Length x width x height||2440.0 mm × 1650.0 mm × -|
|Hours under power|
|At local norms||---------|
SET OF 8 UNITS OF HORIZONTAL FREEZING
Aluminum Plate Freezing System equipped with Aisi Stainless Steel Trays
316, with Hydraulic Piston maneuver and freezing by Gas Freon r 404-a.
Size of the plates: 1650 x 2440 mm
Thickness of the plates: 22 mm
Opening of the plates: 32-80 mm
Number of stations: 15 X 10 units in each station
Number of trays: 150 X unds.
Horizontal plate freezer without cabinet
Approximately half of our horizontal plate freezers are
installed on fishing boats around the world. Mainly
They provide quick freezing of whole fish, fish fillets, shrimp and
prawns of all sizes. After freezing, the products are
normally kept in frozen warehouses on board for later
ground processing. The rest of these freezers are installed on the coast and
used for the fast freezing of seafood, meat and meat products, poultry
corral, vegetables and other food products.
Machinery and equipment for the food, beverage, tobacco and hospitality industry,
Freezing of machinery and equipment for the food industry, Plants and equipment
of deep freezing for the food industry.
Price per unit in Euros of the Manufacturer: 63 000 €
Our price: € 10000
ULSTEIN. TENFJORD AS N-6264. TENNFJORD. NORWAY.
Pump Unit Type .: PU 45.010. Serial No .: 2604. Year: 01.
Max. working pressure .: 125 bars. Test pressure .: 188 bars. Capacity .: 46 l / min.
ABB Motors. 3 ≈ Engine. M2AA 132 MB. Cl. F. IP55. 3GAA 132003-BDA.24.
No .: CSN00-115069. 380v./Triangle/50 Hz / 1455 rpm / 9.5 Kw / 19.0 amp / cos phi.0.86 /
6208-2Z / C3. Weight: 59 Kgs. For the connection of a maximum of 12 freezers
Line input - P 12 L
Return line-T 15 L
Recommended plate pressure Max .: 0.5 bar.
Recommended operating pressure between 90 and 180 bar depending on the number of
Recommended oil flow 9 L per minute
(For a maximum of 12 freezers)
Pressure connection P ½ '' RG inside
Tank connection T 130 L
Pumps 1 units
Installed power 1 x 3 kW
Being a versatile team for many types of products, it is the client
the one that should try to put a gas and a team according to study.
Capacity: (This depends on the Product)
• Block size? mm
• Blocks per station?
• Weight of each block, estimated? kg.
• Weight per batch? kg.
• Estimated freezing time? minutes
• Estimated time of loading and unloading? minutes
• Cycle time per batch, estimated? minutes
• Cycles for 24 hours? cycles
• Capacity for 24 hours? kg per freezer
• Capacity per hour? kg per hour
• Input / output product temperature? ° C / -? ° C
• Evaporation temperature - 38 ° C in the plates
• Cooling capacity kW
• Refrigerant volume? liters per freezer
Feature of each unit:
Flat tank - Freezing plate.
Number of dishes 15 units.
Effective plate size 2440x1650 mm long x wide
Plate opening min. 32 mm
Plate material Aluminum alloy resistant to sea water
Lifting screws between plates Stainless steel, A2 quality.
Guide for uniform movement Included
Safety spring Included, stainless steel - material no. 1.4310
Double contact plates Open to load with product and closed by battering rams
Hydraulic closed high pressure.
Opening procedure, a) manual operation by hydraulic lever (standard)
Material Stainless steel - AISI 316
Input Ø88.9 x 2mm / Ø48.3x2 mm connections
Output Ø114.3 x 2.5 mm
Prepared for hot gas for deglazing.
Hoses between head and freezing plates
Type of hose Freon / Co2 antistatic PTFE - inner hose
Hose type NH3 / R717 Special stainless steel bellows hoses
Wire armor stainless steel AISI 304
AISI 316 stainless steel fittings
The safest solution NO JOINTS, NO LEAKS
Dimensions hoses input 1/2 "x 940 mm
Dimensions hoses outlet 3/4 "x 940 mm
Safety screen for hoses included, stainless steel AISI 304
Hydraulic cylinder and pipe
Surface treatment of cylinder housing Class of corrosion 5CH
Hydraulic pins stainless steel AISI 630
Hydraulic pipes stainless steel AISI 304
Operation Pins are pushing from the top down to give the best
Robust construction design
Frame structure RHS profile, closed profile (without bacteria)
Background structure UPE profile
Surface treatment Hot dip galvanized (optional stainless steel).
150 stainless steel trays per unit (equipment) are included.
Second hand material in perfect condition working until its
Please note that this description may have been translated automatically. Contact us for further information.