Clamping unit for technical data
Clamping force: 900 kN
Distance between tie rods h :: 430 mm
Distance between tie rods v :: 360 mm
Size of the mold plates h: 635 mm
Size of the mold plates v: 610 mm
Minimum. Mold height: 250 mm
max. open daylight: 725 mm
Opening stroke: 475 mm
Ejector stroke: 130 mm
Ejector force: 43 kN
Centering diameter of the moving plate: 125 mm
Fixed plate centering diameter: 125 mm
Mold weight: 800 kg
Injection unit for technical data
Screw diameter: 42 mm
swept volume: 262 ccm
Injection pressure: 1724 bar
Screw Length: 20L/d
Screw Stroke: 145mm
Screw speed: 360 min
Screw torque: 700 N.
Plasticization rate: 36 g/s PS
Outdoor injection rate: 170 g/s hp
Number of heating zones: 5
Nozzle stroke: 230 mm
Mass weight
Machine dimensions lxwxh: 3.9 mx 1.3 mx 2.2 m
Total weight: 3150 kg
equipment included
CEE socket 16A
Machine incl. water flow regulator
Machine without material hopper
Anti-vibration mounts
Schuko socket 10A
Control: Procan CT

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Clamping force 900 T
Screw diameter 42 mm
Tie bar spacing (H) 430 mm
Tie bar spacing (V) 360 mm
Shot volume 262 cm³
Shot weight 36 g
Pressure on material 1724 bar
Platen length 635 mm
Platen width 610 mm
Robot interface
Number of heating zones 5
Opening of the press 475 mm
Mould size 250
-------------------
Length x width x height 3900.0 × 1300.0 × 2200.0
Weight 3150 kg
Worked hours
Hours under power 38000 hours
State good
At local norms yes
Status visible
Client type Reseller
Active since 2007
Offers online 44
Last activity March 26, 2024

Description

Clamping unit for technical data
Clamping force: 900 kN
Distance between tie rods h :: 430 mm
Distance between tie rods v :: 360 mm
Size of the mold plates h: 635 mm
Size of the mold plates v: 610 mm
Minimum. Mold height: 250 mm
max. open daylight: 725 mm
Opening stroke: 475 mm
Ejector stroke: 130 mm
Ejector force: 43 kN
Centering diameter of the moving plate: 125 mm
Fixed plate centering diameter: 125 mm
Mold weight: 800 kg
Injection unit for technical data
Screw diameter: 42 mm
swept volume: 262 ccm
Injection pressure: 1724 bar
Screw Length: 20L/d
Screw Stroke: 145mm
Screw speed: 360 min
Screw torque: 700 N.
Plasticization rate: 36 g/s PS
Outdoor injection rate: 170 g/s hp
Number of heating zones: 5
Nozzle stroke: 230 mm
Mass weight
Machine dimensions lxwxh: 3.9 mx 1.3 mx 2.2 m
Total weight: 3150 kg
equipment included
CEE socket 16A
Machine incl. water flow regulator
Machine without material hopper
Anti-vibration mounts
Schuko socket 10A
Control: Procan CT

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Clamping force 900 T
Screw diameter 42 mm
Tie bar spacing (H) 430 mm
Tie bar spacing (V) 360 mm
Shot volume 262 cm³
Shot weight 36 g
Pressure on material 1724 bar
Platen length 635 mm
Platen width 610 mm
Robot interface
Number of heating zones 5
Opening of the press 475 mm
Mould size 250
-------------------
Length x width x height 3900.0 × 1300.0 × 2200.0
Weight 3150 kg
Worked hours
Hours under power 38000 hours
State good
At local norms yes
Status visible

About this seller

Client type Reseller
Active since 2007
Offers online 44
Last activity March 26, 2024

Here is a selection of similar machines

Dr.Boy 90 A Injection moulding machine