Price on request
Make an offer| Axis X | mm |
| Axis Y | mm |
| Axis Z | mm |
| Type | Vertical |
| Type | |
| CNC | |
| Type of axis | |
| Table length | mm |
| Table width | mm |
| Max. part weight | kg |
| Number of tool pockets | |
| Spindle taper | |
| Max. spindle speed | 12000 rpm |
| Spindle motor power | kW |
| Number of pallets | |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Doosan DNM 350/5AX |
| Last availability date | 15/05/2026 |
This listing is for a Doosan DNM 350/5AX 5-axis machining center manufactured in 2017. It features a high-precision spindle capable of reaching speeds up to 12,000 RPM, equipped with a CAT-40 Big Plus taper. The spindle motor power is 10 HP. The machine supports 5-axis machining (4 + 1), with table tilt and rotation capabilities: B axis tilts from +30° to -120°, and C axis rotates 360°. The trunnion table has a diameter of 13.8 inches, with a maximum part diameter of 15.7 inches and maximum part height of 13.2 inches. The table can support parts weighing up to 551.1 lbs.
The machine's travel distances are 23.6 inches on the X axis, 25.8 inches on the Y axis, and 19.7 inches on the Z axis. It includes a 30-station automatic tool changer compatible with CAT-40 Big Plus taper tools, accommodating tools up to 4.9 inches in diameter and 10.6 inches in height.
Additional features include a spindle chiller unit, MPG handwheel control, chip conveyor, and a coolant system. The control system is a Doosan-Fanuc i-Series CNC control with a PCMCIA card slot and spindle orientation capability. The rapid feed rates are 1417 inches per minute on X and Y axes, and 1181 inches per minute on the Z axis.
The machine requires 80 psi air at 4 scfm and operates on 40.60 kva power with 220V, 3-phase supply. Overall dimensions are approximately 126 inches wide, 124 inches deep, and 125 inches high, with a weight of 18,740 lbs.
Visual inspection shows the machine with open front doors, a visible spindle and rotary table, and a control panel mounted on the right door featuring multiple buttons and a display screen. The exterior panels appear clean with no visible damage. A small step stool is positioned in front of the machine for operator access.
Please note that all specifications and operational hours should be verified by the buyer prior to purchase. The equipment is sold AS-IS, WHERE-IS, and all sales are final. Accessories are included only if listed on the invoice.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
ø 13.8″ Trunnion Table
12,000 RPM High Precision Spindle
Renishaw Reciever Installed
Tool Presetter
30 Station Automatic Tool Changer
Spindle Chiller Unit
MPG Handwheel Control
Chip Conveyor
Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
Equipment is sold AS-IS, WHERE-IS. All sales are final.
Features:
Doosan-Fanuc i-Series CNC Control
17,565 Hours Cutting Time
5 Axis Machining (4 + 1)
PCMCIA Card Slot
Spindle Orientation
Coolant System
Table:
Table size: ø 13.8″
Max Part Diameter: 15.7″
Max Part Height: 13.2″
Max Weight on Table: 551.1 lbs
Travel:
X Axis: 23.6″
Y Axis: 25.8″
Z Axis: 19.7″
B Axis: +30° -120° ( Table Tilt )
C Axis: 360° ( Table Rotate )
Spindle:
Taper Size: CAT-40 Big Plus
Speed Range: 12,000 RPM
Spindle Power: 10 HP
Feed Rates:
Rapid X & Y: 1417 Inch Per Minute
Rapid Z : 1181 Inch Per Minute
Tool Changer:
Capacity: 30 Tools
Taper: CAT-40 Big Plus
Max Tool Diameter: 4.9″
Max Tool Height: 10.6″
General:
Air Required: 80 psi, 4 scfm
Power: 40.60 kva / 220v / 3-Phase
Overall Dimensions: 126″ x 124″ x 125″ High
Weight: 18,740 lbs
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2024 |
| Offers online | 36 |
| Last activity | May 14, 2026 |
ø 13.8″ Trunnion Table
12,000 RPM High Precision Spindle
Renishaw Reciever Installed
Tool Presetter
30 Station Automatic Tool Changer
Spindle Chiller Unit
MPG Handwheel Control
Chip Conveyor
Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
Equipment is sold AS-IS, WHERE-IS. All sales are final.
Features:
Doosan-Fanuc i-Series CNC Control
17,565 Hours Cutting Time
5 Axis Machining (4 + 1)
PCMCIA Card Slot
Spindle Orientation
Coolant System
Table:
Table size: ø 13.8″
Max Part Diameter: 15.7″
Max Part Height: 13.2″
Max Weight on Table: 551.1 lbs
Travel:
X Axis: 23.6″
Y Axis: 25.8″
Z Axis: 19.7″
B Axis: +30° -120° ( Table Tilt )
C Axis: 360° ( Table Rotate )
Spindle:
Taper Size: CAT-40 Big Plus
Speed Range: 12,000 RPM
Spindle Power: 10 HP
Feed Rates:
Rapid X & Y: 1417 Inch Per Minute
Rapid Z : 1181 Inch Per Minute
Tool Changer:
Capacity: 30 Tools
Taper: CAT-40 Big Plus
Max Tool Diameter: 4.9″
Max Tool Height: 10.6″
General:
Air Required: 80 psi, 4 scfm
Power: 40.60 kva / 220v / 3-Phase
Overall Dimensions: 126″ x 124″ x 125″ High
Weight: 18,740 lbs
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Axis X | mm |
| Axis Y | mm |
| Axis Z | mm |
| Type | Vertical |
| Type | |
| CNC | |
| Type of axis | |
| Table length | mm |
| Table width | mm |
| Max. part weight | kg |
| Number of tool pockets | |
| Spindle taper | |
| Max. spindle speed | 12000 rpm |
| Spindle motor power | kW |
| Number of pallets | |
| ------------------- | |
| Length x width x height | - × - × - |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Doosan DNM 350/5AX |
| Last availability date | 15/05/2026 |
This listing is for a Doosan DNM 350/5AX 5-axis machining center manufactured in 2017. It features a high-precision spindle capable of reaching speeds up to 12,000 RPM, equipped with a CAT-40 Big Plus taper. The spindle motor power is 10 HP. The machine supports 5-axis machining (4 + 1), with table tilt and rotation capabilities: B axis tilts from +30° to -120°, and C axis rotates 360°. The trunnion table has a diameter of 13.8 inches, with a maximum part diameter of 15.7 inches and maximum part height of 13.2 inches. The table can support parts weighing up to 551.1 lbs.
The machine's travel distances are 23.6 inches on the X axis, 25.8 inches on the Y axis, and 19.7 inches on the Z axis. It includes a 30-station automatic tool changer compatible with CAT-40 Big Plus taper tools, accommodating tools up to 4.9 inches in diameter and 10.6 inches in height.
Additional features include a spindle chiller unit, MPG handwheel control, chip conveyor, and a coolant system. The control system is a Doosan-Fanuc i-Series CNC control with a PCMCIA card slot and spindle orientation capability. The rapid feed rates are 1417 inches per minute on X and Y axes, and 1181 inches per minute on the Z axis.
The machine requires 80 psi air at 4 scfm and operates on 40.60 kva power with 220V, 3-phase supply. Overall dimensions are approximately 126 inches wide, 124 inches deep, and 125 inches high, with a weight of 18,740 lbs.
Visual inspection shows the machine with open front doors, a visible spindle and rotary table, and a control panel mounted on the right door featuring multiple buttons and a display screen. The exterior panels appear clean with no visible damage. A small step stool is positioned in front of the machine for operator access.
Please note that all specifications and operational hours should be verified by the buyer prior to purchase. The equipment is sold AS-IS, WHERE-IS, and all sales are final. Accessories are included only if listed on the invoice.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2024 |
| Offers online | 36 |
| Last activity | May 14, 2026 |
5-осен обработващ център DOOSAN DNM 350/5AX
5osé obráběcí centrum DOOSAN DNM 350/5AX
DOOSAN DNM 350/5AX 5-akset bearbejdningscenter
DOOSAN DNM 350/5AX 5-Achs-Bearbeitungszentrum
Κέντρο κατεργασίας 5 αξόνων DOOSAN DNM 350/5AX
DOOSAN DNM 350/5AX 5-axis machining center
Centro de mecanizado de 5 ejes DOOSAN DNM 350/5AX
Centre d'usinage 5 axes DOOSAN DNM 350/5AX
5-osni obradni centar DOOSAN DNM 350/5AX
DOOSAN DNM 350/5AX 5 tengelyes megmunkáló központ
Centro di lavoro a 5 assi DOOSAN DNM 350/5AX
DOOSAN DNM 350/5AX 5 ašių apdirbimo centras
DOOSAN DNM 350/5AX 5-assig bewerkingscentrum
Centrum obróbcze 5-osiowe DOOSAN DNM 350/5AX
Centro de usinagem de 5 eixos DOOSAN DNM 350/5AX
Centru de prelucrare cu 5 axe DOOSAN DNM 350/5AX
DOOSAN DNM 350/5AX 5-осевой обрабатывающий центр
5-osni obradni centar DOOSAN DNM 350/5AX
DOOSAN DNM 350/5AX 5-axligt bearbetningscenter
5 eksenli işleme merkezi DOOSAN DNM 350/5AX
EN
- Languages
English (GB)