Price on request
Make an offer| Force | 260 T |
| Stroke length | 1250 mm |
| Table length | 3150 mm |
| Table width | 1250 mm |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 16950.0 × 12100.0 × 7270.0 |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This listing features a large industrial forging press, model PB1341, manufactured in Dnepropetrovsk, Russia. The press has a maximum rated force of 1250 tons, with staged press forces of 260 tons (first stage), 800 tons (second stage), and 1250 tons (third stage). The machine is designed for forging a variety of parts, including plain round forged parts up to 3500 kg, flanged round parts up to 7800 mm in length, square section forged parts with minimum dimensions of 140x140 mm, and forged pinions both with and without holes weighing up to 2000 kg. It can also handle forged rolled rings, hollow-type cylindrical parts, clutch and disc-type parts, and elliptic bottom-type parts within specified size and weight ranges.
Key specifications include a movable cross-beam stroke up to 1250 mm and a movable table with dimensions of 1250 mm width by 3150 mm length. The press operates with a pump-and-accumulator hydraulic drive system using water emulsion as the working fluid at 32 MPa pressure. The hydraulic station has a pump capacity of 1500 l/min and an accumulator volume of 500 liters. The machine offers multiple control modes: manual, semi-automatic with automatic stopping of the cross-beam, and fully automatic operation.
Overall dimensions are approximately 16.95 m length, 12.1 m width, and 7.27 m height, with increased height when equipped with the ejector and bottom die-change system. The press requires a foundation pit up to 4.3 m deep.
The machine is equipped with four vertical cylinders and a yellow mid-section. Hydraulic pipes and hoses are connected at the top, and a base plate with the press die is visible at the bottom center. Visible signs of use include rust and chipped paint on metal surfaces, indicating a used condition. Chains are hanging from the machine structure on one side. The press is currently located indoors on a factory floor with other industrial equipment nearby.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Forging Equipment
Capacity : 1250 tons,
Rated press force :
- first stage : 260 tons,
- second stage : 800 tons,
- third stage : 1250 tons,
Permissible eccentricity : 125 mm,
Movable cross-beam stroke : max 1250
Distance between the table and the movable cross-beam in its up position : 2650 mm,
Working zone daylight dimensions:
- across forging center line : 1900 mm,
- along forging center line : 900 mm,
Movable table dimensions :
width : 1250 mm,
length : 3150 mm,
Movable table stroke relative to the press center line :
in one direction : 1400 mm,
in the other direction : 1400 mm,
Movable table force : 300 kN,
Movable table speed : 50...300 mm/s,
Ejector stroke above the table : 400 mm,
Ejector force : 630 kN,
Number of bottom die-change system stations, Nos 3
Movable cross-beam speed :
- at approach (idle) stroke : 300 mm/s,
-at return stroke : 300 mm/s,
- at working stroke at a force up to 75% of the rated force : 150 mm/s,
Movable cross-beam strokes, spm :
- working strokes at a force up to 75% of the rated force and at 22 mm stroke length : 160 mm,
- finishing strokes at a force up to 25% of the rated force and at min. 20 mm stroke length : 90 mm,
- finishing strokes at a force up to 12% of the rated force and at min. 20 mm stroke length : 100 mm,
Movable cross-beam positional accuracy when stopped at automatic forging mode : ±1,5 mm,
Control mode :
- manual,
- semi-automatic (manual operation with movable cross-beam automatic stopping as per preset bottom position),
- automatic,
Press drive : Pump-and-accumulator station
Working fluid : Water emulsion
Working fluid pressure : 32 MPa,
Accumulator working volume : 500 l,
Hydraulic station pump capacity : 1500 l/min,
Air pressure in filling unit : 0,6...0,8 MPa,
Overall dimensions of the press :
- in plane (length & width) : 16950 x 12100 mm,
- height : 7270 mm,
Overall dimensions of the press with ejector and bottom die- change system, mm
- in plane (length & width) : 16950 x 13740 mm,
- height : 11410 mm,
Press height above floor level : 7270 mm,
Foundation pit depth max : 4300 mm,
Plain round forged parts, forged product weight complete with a test sample up to 3500 kg.
Flanged round forged parts, length up to 7800 mm.
Forged parts of square section with min. dimensions 140x140.
Forged pinions w/o a hole (diameter up to 1000 mm and weight up to 2000 kg).
Forged pinions with a hole (up to 2000 kg) with min. diameter 240 mm and max. height 700 mm.
Forged rolled rings in weight range from 200 up to 2000 kg, height range from 160 mm up to 650 mm and diameter up to 1700 mm.
Forged hollow-type parts (cylinder-type parts) with length up to 2000 mm with ID from 120 mm up to 315 mm.
Forged clutch-type and disc-type parts with a hole, weight up to 2000 kg.
Forged elliptic bottom-type parts with diameter from 315 up to 1600 mm, thickness from 6 up to 12 mm.
Item Condition: Good condition
Capacity Tons: 1250
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 20, 2026 |
Forging Equipment
Capacity : 1250 tons,
Rated press force :
- first stage : 260 tons,
- second stage : 800 tons,
- third stage : 1250 tons,
Permissible eccentricity : 125 mm,
Movable cross-beam stroke : max 1250
Distance between the table and the movable cross-beam in its up position : 2650 mm,
Working zone daylight dimensions:
- across forging center line : 1900 mm,
- along forging center line : 900 mm,
Movable table dimensions :
width : 1250 mm,
length : 3150 mm,
Movable table stroke relative to the press center line :
in one direction : 1400 mm,
in the other direction : 1400 mm,
Movable table force : 300 kN,
Movable table speed : 50...300 mm/s,
Ejector stroke above the table : 400 mm,
Ejector force : 630 kN,
Number of bottom die-change system stations, Nos 3
Movable cross-beam speed :
- at approach (idle) stroke : 300 mm/s,
-at return stroke : 300 mm/s,
- at working stroke at a force up to 75% of the rated force : 150 mm/s,
Movable cross-beam strokes, spm :
- working strokes at a force up to 75% of the rated force and at 22 mm stroke length : 160 mm,
- finishing strokes at a force up to 25% of the rated force and at min. 20 mm stroke length : 90 mm,
- finishing strokes at a force up to 12% of the rated force and at min. 20 mm stroke length : 100 mm,
Movable cross-beam positional accuracy when stopped at automatic forging mode : ±1,5 mm,
Control mode :
- manual,
- semi-automatic (manual operation with movable cross-beam automatic stopping as per preset bottom position),
- automatic,
Press drive : Pump-and-accumulator station
Working fluid : Water emulsion
Working fluid pressure : 32 MPa,
Accumulator working volume : 500 l,
Hydraulic station pump capacity : 1500 l/min,
Air pressure in filling unit : 0,6...0,8 MPa,
Overall dimensions of the press :
- in plane (length & width) : 16950 x 12100 mm,
- height : 7270 mm,
Overall dimensions of the press with ejector and bottom die- change system, mm
- in plane (length & width) : 16950 x 13740 mm,
- height : 11410 mm,
Press height above floor level : 7270 mm,
Foundation pit depth max : 4300 mm,
Plain round forged parts, forged product weight complete with a test sample up to 3500 kg.
Flanged round forged parts, length up to 7800 mm.
Forged parts of square section with min. dimensions 140x140.
Forged pinions w/o a hole (diameter up to 1000 mm and weight up to 2000 kg).
Forged pinions with a hole (up to 2000 kg) with min. diameter 240 mm and max. height 700 mm.
Forged rolled rings in weight range from 200 up to 2000 kg, height range from 160 mm up to 650 mm and diameter up to 1700 mm.
Forged hollow-type parts (cylinder-type parts) with length up to 2000 mm with ID from 120 mm up to 315 mm.
Forged clutch-type and disc-type parts with a hole, weight up to 2000 kg.
Forged elliptic bottom-type parts with diameter from 315 up to 1600 mm, thickness from 6 up to 12 mm.
Item Condition: Good condition
Capacity Tons: 1250
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Force | 260 T |
| Stroke length | 1250 mm |
| Table length | 3150 mm |
| Table width | 1250 mm |
| Engine Power | kW |
| ------------------- | |
| Length x width x height | 16950.0 × 12100.0 × 7270.0 |
| Weight | kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 02/04/2026 |
This listing features a large industrial forging press, model PB1341, manufactured in Dnepropetrovsk, Russia. The press has a maximum rated force of 1250 tons, with staged press forces of 260 tons (first stage), 800 tons (second stage), and 1250 tons (third stage). The machine is designed for forging a variety of parts, including plain round forged parts up to 3500 kg, flanged round parts up to 7800 mm in length, square section forged parts with minimum dimensions of 140x140 mm, and forged pinions both with and without holes weighing up to 2000 kg. It can also handle forged rolled rings, hollow-type cylindrical parts, clutch and disc-type parts, and elliptic bottom-type parts within specified size and weight ranges.
Key specifications include a movable cross-beam stroke up to 1250 mm and a movable table with dimensions of 1250 mm width by 3150 mm length. The press operates with a pump-and-accumulator hydraulic drive system using water emulsion as the working fluid at 32 MPa pressure. The hydraulic station has a pump capacity of 1500 l/min and an accumulator volume of 500 liters. The machine offers multiple control modes: manual, semi-automatic with automatic stopping of the cross-beam, and fully automatic operation.
Overall dimensions are approximately 16.95 m length, 12.1 m width, and 7.27 m height, with increased height when equipped with the ejector and bottom die-change system. The press requires a foundation pit up to 4.3 m deep.
The machine is equipped with four vertical cylinders and a yellow mid-section. Hydraulic pipes and hoses are connected at the top, and a base plate with the press die is visible at the bottom center. Visible signs of use include rust and chipped paint on metal surfaces, indicating a used condition. Chains are hanging from the machine structure on one side. The press is currently located indoors on a factory floor with other industrial equipment nearby.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 1120 |
| Last activity | April 20, 2026 |
Преса Dnepropetrovsk, Russia PB1341
Lis Dnepropetrovsk, Russia PB1341
Dnepropetrovsk, Russia PB1341 Presse
Dnepropetrovsk, Russia PB1341 Presse
Πρέσα Dnepropetrovsk, Russia PB1341
Dnepropetrovsk, Russia PB1341 Press
Prensa Dnepropetrovsk, Russia PB1341
Presse Dnepropetrovsk, Russia PB1341
Preša Dnepropetrovsk, Russia PB1341
Dnepropetrovsk, Russia PB1341 Prés
Pressa Dnepropetrovsk, Russia PB1341
Dnepropetrovsk, Russia PB1341 Presas
Dnepropetrovsk, Russia PB1341 Pers
Prasa Dnepropetrovsk, Russia PB1341
Prensa Dnepropetrovsk, Russia PB1341
Prese Dnepropetrovsk, Russia PB1341
Dnepropetrovsk, Russia PB1341 Пресс
Presa Dnepropetrovsk, Russia PB1341
Dnepropetrovsk, Russia PB1341 Press
Pres Dnepropetrovsk, Russia PB1341
EN
- Languages
English (GB)