Used DMG NHX4000 Horizontal machining center
Price on request
Contact us to receive an offer.
| Axis X | 560 mm |
| Axis Y | 560 mm |
| Axis Z | 660 mm |
| Rotary table (4th axis) | no |
| CNC | Siemens 840D SL |
| Table length | 400 mm |
| Table width | 400 mm |
| Number of tool pockets | 40 |
| Spindle taper | BT40 |
| Max. spindle speed | 15000 rpm |
| ------------------- | |
| worked hours | 21663 hours |
| hours under power | 41220 hours |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Datasheet | DMG NHX4000 |
This listing is for a DMG NHX4000 horizontal machining center manufactured in 2017. The machine offers a travel range of 560 mm along both the X and Y axes, and 660 mm along the Z axis, providing substantial working volume for various machining tasks. It features a clamping surface measuring 400 mm by 400 mm, suitable for securing workpieces during operations. The machine includes two pallets equipped with threaded holes, which facilitate flexible and secure workpiece mounting.
The tool holder is of the BT40 type, accommodating up to 40 tools, allowing for a wide range of machining applications without frequent tool changes. The spindle has a maximum speed of 15,000 rpm and a power rating of 21/16 kW, supporting high-speed machining processes. The machine is equipped with an automatic turning APC system featuring two stations, enhancing productivity by enabling quick tool changes and part indexing.
Additional features include an indexing table with a 1º angle capability and a chip conveyor with rear discharge, which helps in efficient chip removal during machining operations. The machine utilizes a direct encoder system for precise positioning and control.
Control is managed via the J-HP0001 CELOS® system integrated with Siemens 840D sl Operate. This control setup includes a 21.5-inch ERGOline® multi-touch screen, facilitating intuitive operation. The system supports various applications (APPs) that simplify machine operation and enable consistent management, documentation, and visualization of order, process, and machine data. It is network-compatible with CAD/CAM systems and supports integration with PPS/ERP software.
The machine's exterior appears clean and in good condition with no visible damage. The control panel with screen and buttons is attached to the machine, ensuring ease of access during operation. The door is shown open in one image, revealing the spindle inside, indicative of the machine's horizontal machining center design.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Horizontal machining center
Travel range X/Y/Z: 560/560/660 mm
Clamping surface: 400x400 mm
Two pallets with threaded holes
Tool holder: BT40
Drive spindle: 15,000 rpm, 21/16 kW
(40/100 ED)
Number of tools: 40
Indexing table angle 1º
Automatic turning APC with 2 stations
Chip conveyor (rear discharge)
Direct encoder system
Control:
J-HP0001* CELOS® with Siemens 840D sl Operate
including 21.5" ERGOline® Control
with multi-touch screen.
APPs simplify machine operation
and enable consistent
management, documentation, and
visualization of order, process,
and machine data. Can be networked with CAD/
CAM and is compatible with PPS/ERP
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
When was this DMG NHX4000 manufactured?
This DMG NHX4000 Horizontal machining center was manufactured in 2017.
Is this equipment currently powered on?
This equipment is currently without power.
Is a demonstration available for this DMG NHX4000?
This DMG NHX4000 Horizontal machining center is available for demonstration by appointment if there is serious interest in purchasing.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2018 |
| Offers online | 0 |
| Last activity | May 27, 2026 |
Horizontal machining center
Travel range X/Y/Z: 560/560/660 mm
Clamping surface: 400x400 mm
Two pallets with threaded holes
Tool holder: BT40
Drive spindle: 15,000 rpm, 21/16 kW
(40/100 ED)
Number of tools: 40
Indexing table angle 1º
Automatic turning APC with 2 stations
Chip conveyor (rear discharge)
Direct encoder system
Control:
J-HP0001* CELOS® with Siemens 840D sl Operate
including 21.5" ERGOline® Control
with multi-touch screen.
APPs simplify machine operation
and enable consistent
management, documentation, and
visualization of order, process,
and machine data. Can be networked with CAD/
CAM and is compatible with PPS/ERP
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
When was this DMG NHX4000 manufactured?
This DMG NHX4000 Horizontal machining center was manufactured in 2017.
Is this equipment currently powered on?
This equipment is currently without power.
Is a demonstration available for this DMG NHX4000?
This DMG NHX4000 Horizontal machining center is available for demonstration by appointment if there is serious interest in purchasing.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Axis X | 560 mm |
| Axis Y | 560 mm |
| Axis Z | 660 mm |
| Rotary table (4th axis) | no |
| CNC | Siemens 840D SL |
| Table length | 400 mm |
| Table width | 400 mm |
| Number of tool pockets | 40 |
| Spindle taper | BT40 |
| Max. spindle speed | 15000 rpm |
| ------------------- | |
| worked hours | 21663 hours |
| hours under power | 41220 hours |
| state | as-is, where-is |
| At local norms | --------- |
| status | visible |
| Datasheet | DMG NHX4000 |
This listing is for a DMG NHX4000 horizontal machining center manufactured in 2017. The machine offers a travel range of 560 mm along both the X and Y axes, and 660 mm along the Z axis, providing substantial working volume for various machining tasks. It features a clamping surface measuring 400 mm by 400 mm, suitable for securing workpieces during operations. The machine includes two pallets equipped with threaded holes, which facilitate flexible and secure workpiece mounting.
The tool holder is of the BT40 type, accommodating up to 40 tools, allowing for a wide range of machining applications without frequent tool changes. The spindle has a maximum speed of 15,000 rpm and a power rating of 21/16 kW, supporting high-speed machining processes. The machine is equipped with an automatic turning APC system featuring two stations, enhancing productivity by enabling quick tool changes and part indexing.
Additional features include an indexing table with a 1º angle capability and a chip conveyor with rear discharge, which helps in efficient chip removal during machining operations. The machine utilizes a direct encoder system for precise positioning and control.
Control is managed via the J-HP0001 CELOS® system integrated with Siemens 840D sl Operate. This control setup includes a 21.5-inch ERGOline® multi-touch screen, facilitating intuitive operation. The system supports various applications (APPs) that simplify machine operation and enable consistent management, documentation, and visualization of order, process, and machine data. It is network-compatible with CAD/CAM systems and supports integration with PPS/ERP software.
The machine's exterior appears clean and in good condition with no visible damage. The control panel with screen and buttons is attached to the machine, ensuring ease of access during operation. The door is shown open in one image, revealing the spindle inside, indicative of the machine's horizontal machining center design.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2018 |
| Offers online | 0 |
| Last activity | May 27, 2026 |
Използван DMG NHX4000 Хоризонтален обработващ център
Použité horizontální obráběcí centrum DMG NHX4000
Brugt DMG NHX4000 vandret bearbejdningscenter
Gebrauchtes DMG NHX4000 Horizontales Bearbeitungszentrum
Μεταχειρισμένο κέντρο οριζόντιας κατεργασίας DMG NHX4000
Used DMG NHX4000 Horizontal machining center
Centro de mecanizado horizontal DMG NHX4000 usado
Centre d'usinage horizontal DMG NHX4000 d'occasion
Rabljeni horizontalni obradni centar DMG NHX4000
Használt DMG NHX4000 Vízszintes megmunkáló központ
Centro di lavoro orizzontale DMG NHX4000
Naudotas DMG NHX4000 Horizontalusis apdirbimo centras
Gebruikt DMG NHX4000 horizontaal bewerkingscentrum
Używane poziome centrum obróbcze DMG NHX4000
Centro de maquinagem horizontal DMG NHX4000 usado
Centru de prelucrare orizontal DMG NHX4000
Горизонтальный обрабатывающий центр DMG NHX4000
Polovni horizontalni obradni centar DMG NHX4000
Begagnad DMG NHX4000 Horisontell bearbetningscenter
Kullanılmış DMG NHX4000 Yatay işleme merkezi
EN
- Languages
English (GB)