| Manufacturer | DMG |
|---|---|
| Model | DMC 835V |
| Year | 2008 |
| Location | Germany
|
Product overview:
This listing is for a DMG DMC 835V vertical machining center (category: Machining centers - vertical). The machine is identified by manufacturer and model and includes the key dimensional and performance data provided below. No additional accessories, tooling or condition statements are included in this description because those details were not provided.
Key specifications (as provided):
- Manufacturer: DMG
- Model: DMC 835V
- Year manufactured: 2008
- Footprint / overall size: 3700.0 mm (length) x 2450.0 mm (width) x 2750.0 mm (height)
- Weight (approx.): 4100.0 kg
- X axis travel: 835.0 mm
- Z axis travel: 510.0 mm
- Maximum workpiece/part weight capacity: 800.0 kg
- Maximum spindle speed: 10000.0 rpm
Specifications not provided in the supplied data:
- Table length and width: not specified
- Number of tool pockets (tool magazine capacity): not specified
- Spindle motor power: not specified
Notes for prospective buyers:
- The listing contains the manufacturer's model and the mechanical travels and size parameters necessary for evaluating fit and basic capacity. If you require details not listed above (table dimensions, tool magazine capacity, spindle motor power, current operating condition, control type/software, installed tooling, maintenance history or test information), request those specific items from the seller before purchase.
- Measurements and capacities in this description are presented only as provided in the available data. No claims are made about operational status, recent service, testing, or warranty.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
General Information
Manufacturer: DMG
Model: DMC 835V
Year of Manufacture: 2008
Control: Heidenhain 530i
Travel: X 835 mm, Y 510 mm, Z 510 mm
Operating hours: 24,283 h
Spindle
Speed: 10,000 rpm
Chuck: SK40
Automatic tool changer
Number of stations: 30 positions
Table
Table dimensions: 1,000 x 560 mm
Maximum table load: 800 kg
Dimensions and Weight
Dimensions: 3,700 mm x 2,450 mm x 2,750 mm
Weight: approx. 4,100 kg
Condition
Condition: Used
Operational status: Tested and fully functional
Other equipment and included accessories:
Fourth axis
Electric hand-held control panel
Chip conveyor
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2024 |
| Offers online | 34 |
| Last activity | Oct. 11, 2026 |
CNC BOTE is a trusted name in the world of used CNC machinery and spare parts, proudly based in Peiting, Bavaria. With over 20 years of hands-on experience, the company specializes in high-quality used and demo CNC machines, including lathes, milling machines, machining centers, grinders, saws, and more. Each machine is carefully selected to meet the highest standards of performance and reliability.
What sets CNC BOTE apart is their full-service approach. Alongside their machine inventory, they operate one of Germany’s most comprehensive warehouses for CNC spare parts and electronics. With over 9,000 tested automation and control components from more than 110 manufacturers, they ensure fast delivery and significant cost savings for workshops and industrial clients alike.
CNC BOTE also offers a user-friendly online shop where customers can browse machines, spare parts, tools, and accessories all in one place. Whether you’re upgrading your production line or sourcing hard-to-find components, CNC BOTE combines expertise, quality, and customer-focused service to keep your operations running smoothly.
General Information
Manufacturer: DMG
Model: DMC 835V
Year of Manufacture: 2008
Control: Heidenhain 530i
Travel: X 835 mm, Y 510 mm, Z 510 mm
Operating hours: 24,283 h
Spindle
Speed: 10,000 rpm
Chuck: SK40
Automatic tool changer
Number of stations: 30 positions
Table
Table dimensions: 1,000 x 560 mm
Maximum table load: 800 kg
Dimensions and Weight
Dimensions: 3,700 mm x 2,450 mm x 2,750 mm
Weight: approx. 4,100 kg
Condition
Condition: Used
Operational status: Tested and fully functional
Other equipment and included accessories:
Fourth axis
Electric hand-held control panel
Chip conveyor
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Product overview:
This listing is for a DMG DMC 835V vertical machining center (category: Machining centers - vertical). The machine is identified by manufacturer and model and includes the key dimensional and performance data provided below. No additional accessories, tooling or condition statements are included in this description because those details were not provided.
Key specifications (as provided):
- Manufacturer: DMG
- Model: DMC 835V
- Year manufactured: 2008
- Footprint / overall size: 3700.0 mm (length) x 2450.0 mm (width) x 2750.0 mm (height)
- Weight (approx.): 4100.0 kg
- X axis travel: 835.0 mm
- Z axis travel: 510.0 mm
- Maximum workpiece/part weight capacity: 800.0 kg
- Maximum spindle speed: 10000.0 rpm
Specifications not provided in the supplied data:
- Table length and width: not specified
- Number of tool pockets (tool magazine capacity): not specified
- Spindle motor power: not specified
Notes for prospective buyers:
- The listing contains the manufacturer's model and the mechanical travels and size parameters necessary for evaluating fit and basic capacity. If you require details not listed above (table dimensions, tool magazine capacity, spindle motor power, current operating condition, control type/software, installed tooling, maintenance history or test information), request those specific items from the seller before purchase.
- Measurements and capacities in this description are presented only as provided in the available data. No claims are made about operational status, recent service, testing, or warranty.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2024 |
| Offers online | 34 |
| Last activity | Oct. 11, 2026 |
CNC BOTE is a trusted name in the world of used CNC machinery and spare parts, proudly based in Peiting, Bavaria. With over 20 years of hands-on experience, the company specializes in high-quality used and demo CNC machines, including lathes, milling machines, machining centers, grinders, saws, and more. Each machine is carefully selected to meet the highest standards of performance and reliability.
What sets CNC BOTE apart is their full-service approach. Alongside their machine inventory, they operate one of Germany’s most comprehensive warehouses for CNC spare parts and electronics. With over 9,000 tested automation and control components from more than 110 manufacturers, they ensure fast delivery and significant cost savings for workshops and industrial clients alike.
CNC BOTE also offers a user-friendly online shop where customers can browse machines, spare parts, tools, and accessories all in one place. Whether you’re upgrading your production line or sourcing hard-to-find components, CNC BOTE combines expertise, quality, and customer-focused service to keep your operations running smoothly.
Вертикален машинистки център DMG DMC 835V
Vertikální obráběcí centrum DMG DMC 835V
DMG DMC 835V Vertikalt bearbejdningscenter
Vertikales Bearbeitungszentrum DMG DMC 835V
Κάθετο κέντρο κατεργασίας DMG DMC 835V
DMG DMC 835V Vertical machining center
Centro de mecanizado vertical DMG DMC 835V
Centre d'usinage vertical DMG DMC 835V
Vertikalni strojni centar DMG DMC 835V
DMG DMC 835V függőleges megmunkáló központ
Centro di lavorazione verticale DMG DMC 835V
Vertikalus apdirbimo centras DMG DMC 835V
DMG DMC 835V verticaal bewerkingscentrum
Pionowe centrum obróbcze DMG DMC 835V
Centro de usinagem vertical DMG DMC 835V
Centrul de prelucrare vertical DMG DMC 835V
Вертикальный обрабатывающий центр DMG DMC 835V
Вертикални обрађивачки центар DMG DMC 835V
DMG DMC 835V vertikalt bearbetningscenter
DMG DMC 835V Dikey işleme merkezi
EN
- Languages
English (GB)