Sorry, this offer is no longer available on Exapro

D&K DS JUPITER laminator

Here is a selection of similar machines

Double-sided high volume laminator D&K Europe Ltd. JUPITER DS SYSTEM model from 2012 with suction feeder, automatic sheet separator and in-line cutter, 35 m/min or 25 m/min double-sided
This fully automated D&K Jupiter DS laminator has been designed to handle high volume double-sided printing at high speed. It covers formats up to B2 (portrait and landscape). Its equipment makes it a versatile machine as well suited to the most delicate digital printing as to the large volumes of offset printing.
Benefits :
Production speed can reach 35m per minute (single-sided lamination) and 25m per minute (double-sided lamination)
The electric heating cylinder makes it easy to switch from one-sided to two-sided lamination
Allows micro perforation of the film
High stack loader on pallet to maximize efficiency and long working autonomy
The pneumatic feeder ensures the transfer of light weight sheets and digital outputs while a detection cell avoids incidents
The centralized control panel facilitates the use of the machine
Pneumatic cylinder pressure
The pneumatic chuck equipped with a tilting support facilitates the installation of the coil
Lateral movement of the adjustable film during use significantly reduces paper waste
An adjustable decurling device during operation guarantees an absolutely flat output result
Equipped as standard with a paper reception of a vibrating table. As an option, the D&K Jupiter DS can be equipped with a paper reception with automatic feeder and pallet
Paper weight: from 115 g/m² (90 g/m² if "re-wind" available) to 600 g/m²
Sheet size: from 205 x 220 mm to 540 x 740 mm
Lamination speed up to 35 m/min (simplex) / Up to 25 m/min (duplex)
Chuck diameter: 75mm
Temperature: 95-120°C
Power supply: 380-415V, three-phase, 18kw
Air Requirements: 15 cfm dry air at 100 psi
Dimensions (W x D x H): 255x130x140 cm
Weight 1200 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Max. paper length 54 cm
Max. paper width 74 cm
Min. paper length 20.5 cm
Min. paper width 22 cm
-------------------
Length x width x height 2550.0 × 1300.0 × 1400.0
Weight 1200 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2020
Offers online 17
Last activity March 28, 2024

Description

Double-sided high volume laminator D&K Europe Ltd. JUPITER DS SYSTEM model from 2012 with suction feeder, automatic sheet separator and in-line cutter, 35 m/min or 25 m/min double-sided
This fully automated D&K Jupiter DS laminator has been designed to handle high volume double-sided printing at high speed. It covers formats up to B2 (portrait and landscape). Its equipment makes it a versatile machine as well suited to the most delicate digital printing as to the large volumes of offset printing.
Benefits :
Production speed can reach 35m per minute (single-sided lamination) and 25m per minute (double-sided lamination)
The electric heating cylinder makes it easy to switch from one-sided to two-sided lamination
Allows micro perforation of the film
High stack loader on pallet to maximize efficiency and long working autonomy
The pneumatic feeder ensures the transfer of light weight sheets and digital outputs while a detection cell avoids incidents
The centralized control panel facilitates the use of the machine
Pneumatic cylinder pressure
The pneumatic chuck equipped with a tilting support facilitates the installation of the coil
Lateral movement of the adjustable film during use significantly reduces paper waste
An adjustable decurling device during operation guarantees an absolutely flat output result
Equipped as standard with a paper reception of a vibrating table. As an option, the D&K Jupiter DS can be equipped with a paper reception with automatic feeder and pallet
Paper weight: from 115 g/m² (90 g/m² if "re-wind" available) to 600 g/m²
Sheet size: from 205 x 220 mm to 540 x 740 mm
Lamination speed up to 35 m/min (simplex) / Up to 25 m/min (duplex)
Chuck diameter: 75mm
Temperature: 95-120°C
Power supply: 380-415V, three-phase, 18kw
Air Requirements: 15 cfm dry air at 100 psi
Dimensions (W x D x H): 255x130x140 cm
Weight 1200 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Max. paper length 54 cm
Max. paper width 74 cm
Min. paper length 20.5 cm
Min. paper width 22 cm
-------------------
Length x width x height 2550.0 × 1300.0 × 1400.0
Weight 1200 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2020
Offers online 17
Last activity March 28, 2024