Price on request
View price| Folding length | 1828.8 mm |
| Throat | 228.6 mm |
| Vertical stroke | 50.8 mm |
| Engine Power | 2.23714 kW |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 29/05/2026 |
This listing features a DI-ACRO press brake, model “16-72,” designed for metal bending applications. The machine has a folding length of 1828.8 mm (72 inches) and a throat depth of 228.6 mm (9 inches), allowing it to handle a variety of sheet metal sizes. It offers a vertical stroke of 50.8 mm (2 inches) to accommodate different bending requirements. The press brake is powered by a 2.23714 kW (approximately 3.0 HP) engine, suitable for industrial use.
The machine's structure includes a large bending beam and a lower die area, essential components for the bending process. A crank handle and mechanical linkage are located on the upper right side, facilitating manual adjustments. The electrical control panel is equipped with a Furnas label, indicating the brand of the control components, and wiring is neatly secured along the machine's side through conduit.
The press brake exhibits signs of use, with visible wear such as rust spots, chipped and peeling paint, and dirt accumulation on various surfaces, including the white central panel and bending areas. Several caution labels are present on the front panel, though some are worn. The machine’s framework at the rear reveals hydraulic or pneumatic components with visible piping and tubing.
Overall, the DI-ACRO “16-72” press brake is a robust industrial machine showing typical wear from usage. It includes important mechanical and electrical components necessary for operation, but it is offered as-is without information on testing or refurbishment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Offer Title: DI-ACRO “16-72” Press Brake
Manufacturer: DI-ACRO
Model: “16-72”
Technical Condition: As-is, where-is
Folding Length: 72.0 inches
Throat Depth: 9.0 inches
Vertical Stroke: 2.0 inches
Engine Power: 3.0 HP
Motor: 3 Phase, 460V (transformers available for any voltage)
RPM: 1,140
Maximum Width Capacity: 72 inches
Stroke: 2 inches
Ram Adjustment: 3 inches
Floor to Top of Bed Height: 37 inches
Stroke Per Minute: 25 (fast), 6.75 (slow), 17.5 (dual)
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 108 |
| Last activity | May 23, 2026 |
Offer Title: DI-ACRO “16-72” Press Brake
Manufacturer: DI-ACRO
Model: “16-72”
Technical Condition: As-is, where-is
Folding Length: 72.0 inches
Throat Depth: 9.0 inches
Vertical Stroke: 2.0 inches
Engine Power: 3.0 HP
Motor: 3 Phase, 460V (transformers available for any voltage)
RPM: 1,140
Maximum Width Capacity: 72 inches
Stroke: 2 inches
Ram Adjustment: 3 inches
Floor to Top of Bed Height: 37 inches
Stroke Per Minute: 25 (fast), 6.75 (slow), 17.5 (dual)
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Folding length | 1828.8 mm |
| Throat | 228.6 mm |
| Vertical stroke | 50.8 mm |
| Engine Power | 2.23714 kW |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 29/05/2026 |
This listing features a DI-ACRO press brake, model “16-72,” designed for metal bending applications. The machine has a folding length of 1828.8 mm (72 inches) and a throat depth of 228.6 mm (9 inches), allowing it to handle a variety of sheet metal sizes. It offers a vertical stroke of 50.8 mm (2 inches) to accommodate different bending requirements. The press brake is powered by a 2.23714 kW (approximately 3.0 HP) engine, suitable for industrial use.
The machine's structure includes a large bending beam and a lower die area, essential components for the bending process. A crank handle and mechanical linkage are located on the upper right side, facilitating manual adjustments. The electrical control panel is equipped with a Furnas label, indicating the brand of the control components, and wiring is neatly secured along the machine's side through conduit.
The press brake exhibits signs of use, with visible wear such as rust spots, chipped and peeling paint, and dirt accumulation on various surfaces, including the white central panel and bending areas. Several caution labels are present on the front panel, though some are worn. The machine’s framework at the rear reveals hydraulic or pneumatic components with visible piping and tubing.
Overall, the DI-ACRO “16-72” press brake is a robust industrial machine showing typical wear from usage. It includes important mechanical and electrical components necessary for operation, but it is offered as-is without information on testing or refurbishment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 108 |
| Last activity | May 23, 2026 |
Натиснете спирачка DI-ACRO “16-72”
Ohraňovací lis DI-ACRO “16-72”
DI-ACRO “16-72” Tryk på bremsen
DI-ACRO “16-72” Abkantpresse
πάτα φρένο DI-ACRO “16-72”
DI-ACRO “16-72” Press brake
Prensa plegadora DI-ACRO “16-72”
Presse plieuse DI-ACRO “16-72”
Pritisnite kočnicu DI-ACRO “16-72”
DI-ACRO “16-72” nyomd a féket
Pressa piegatrice DI-ACRO “16-72”
Paspauskite stabdį DI-ACRO “16-72”
DI-ACRO “16-72” druk op de rem
Prasa krawędziowa DI-ACRO “16-72”
Pressione o freio DI-ACRO “16-72”
apasa frana DI-ACRO “16-72”
DI-ACRO “16-72” Листогибочный пресс
pritisni kočnicu DI-ACRO “16-72”
DI-ACRO “16-72” Tryck på bromsen
Abkant Pres DI-ACRO “16-72”
EN
- Languages
English (GB)