The machine has a Demag DR631-0399 robot built into it.
Machine with CE standards.

Type of material used: PC/ABS

Service History:
3.2018 - Calibration - Ergocheck
1.2016 — Replacement of a faulty hydraulic system pressure sensor. scheme
1.2015 – repair of the nozzle rod. units
2.2014 — Replacement of the chamber, auger and tip
1.2013 — Replacement of the screw and tip
6.2012 – Repair, re-sealing of the injection cylinder. units
11.2010 — Repair of proportional valve
4.2008 — Replacing the control panel display
3.2008 — Replacing the proportional valve
3.2008 — Calibration — Ergocheck
12.2007 — Replacing the tip

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Clamping force 350 T
Screw diameter 70 mm
Tie bar spacing (H) 810 mm
Tie bar spacing (V) 710 mm
Shot volume 1212 cm³
Shot weight 1090 g
Pressure on material 1877 bar
Platen length 1200 mm
Platen width 1100 mm
Bi-metal screw No
Equipped with robot Yes
Robot interface Euromap E 67
Number of cores 2
Opening of the press 710 mm
Mould size 380
-------------------
Length x width x height 7800.0 × 2200.0 × 4500.0
Weight 20000 kg
Worked hours
Hours under power 86200 hours
State in working conditions
At local norms yes
Status visible but unplugged
Client type User – large company
Active since 2022
Offers online 2
Last activity March 28, 2024

Description

The machine has a Demag DR631-0399 robot built into it.
Machine with CE standards.

Type of material used: PC/ABS

Service History:
3.2018 - Calibration - Ergocheck
1.2016 — Replacement of a faulty hydraulic system pressure sensor. scheme
1.2015 – repair of the nozzle rod. units
2.2014 — Replacement of the chamber, auger and tip
1.2013 — Replacement of the screw and tip
6.2012 – Repair, re-sealing of the injection cylinder. units
11.2010 — Repair of proportional valve
4.2008 — Replacing the control panel display
3.2008 — Replacing the proportional valve
3.2008 — Calibration — Ergocheck
12.2007 — Replacing the tip

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Clamping force 350 T
Screw diameter 70 mm
Tie bar spacing (H) 810 mm
Tie bar spacing (V) 710 mm
Shot volume 1212 cm³
Shot weight 1090 g
Pressure on material 1877 bar
Platen length 1200 mm
Platen width 1100 mm
Bi-metal screw No
Equipped with robot Yes
Robot interface Euromap E 67
Number of cores 2
Opening of the press 710 mm
Mould size 380
-------------------
Length x width x height 7800.0 × 2200.0 × 4500.0
Weight 20000 kg
Worked hours
Hours under power 86200 hours
State in working conditions
At local norms yes
Status visible but unplugged

About this seller

Client type User – large company
Active since 2022
Offers online 2
Last activity March 28, 2024

Here is a selection of similar machines

Used Demag Ergotech 350/810-2300 Injection moulding machine