Universal milling machine Deckel FP1 with 3-axis digital display K&C NEW
Special paint finish in light gray
>> Built around 1975
>> Rigid angle table (newly planed)
>> Speed: 40 - 2000 rpm
>> Feed 2 axes
>> Drive power: 1/1.5 KW
>> Travel X/Y/Z: 300/150/340 mm
>> Vertical quill SK40 and horizontal quill - SK40
>> Tightening system S20x2
>> Weight approx. 700 kg

Accessories and equipment:
>> 3-axis digital display K&C Newly assembled with manufacturer's warranty and operating instructions.
Display device: reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circle functions, rows of holes, radius milling functions, etc.
>> 1 set of collets from 1mm to 18mm 0.5mm increasing
>> 6 pcs tool holders
>> Coolant device

About the machine:
A universal cover FP1 milling machine is offered in very good condition. The lid has very little crank play and all spindles can be moved easily. The machine was completely dismantled and repainted. The wedge strips were adjusted. An oil change was carried out. Accessories include a set of collets from 1mm to 18mm increments of 0.5mm. Mechanically and electrically tested. The digital display from K&C makes working easier and more precise. You also have a 1-year guarantee on the new digital display. Take advantage of the opportunity to view and try out the lids on site under power.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

X Axis 3000 mm
Y Axis 150 mm
Z Axis 340 mm
CNC type
Max. spindle speed 2000 rpm
Spindle taper SK40
Spindle motor power 1.5 kW
Overhauled no
-------------------
Weight 700 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2008
Offers online 49
Last activity March 28, 2024

Description

Universal milling machine Deckel FP1 with 3-axis digital display K&C NEW
Special paint finish in light gray
>> Built around 1975
>> Rigid angle table (newly planed)
>> Speed: 40 - 2000 rpm
>> Feed 2 axes
>> Drive power: 1/1.5 KW
>> Travel X/Y/Z: 300/150/340 mm
>> Vertical quill SK40 and horizontal quill - SK40
>> Tightening system S20x2
>> Weight approx. 700 kg

Accessories and equipment:
>> 3-axis digital display K&C Newly assembled with manufacturer's warranty and operating instructions.
Display device: reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circle functions, rows of holes, radius milling functions, etc.
>> 1 set of collets from 1mm to 18mm 0.5mm increasing
>> 6 pcs tool holders
>> Coolant device

About the machine:
A universal cover FP1 milling machine is offered in very good condition. The lid has very little crank play and all spindles can be moved easily. The machine was completely dismantled and repainted. The wedge strips were adjusted. An oil change was carried out. Accessories include a set of collets from 1mm to 18mm increments of 0.5mm. Mechanically and electrically tested. The digital display from K&C makes working easier and more precise. You also have a 1-year guarantee on the new digital display. Take advantage of the opportunity to view and try out the lids on site under power.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

X Axis 3000 mm
Y Axis 150 mm
Z Axis 340 mm
CNC type
Max. spindle speed 2000 rpm
Spindle taper SK40
Spindle motor power 1.5 kW
Overhauled no
-------------------
Weight 700 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2008
Offers online 49
Last activity March 28, 2024

Here is a selection of similar machines

Deckel FP1 cnc universal milling machine